X-PRO 12V 35/35W Head Light Bulb Xenon User Manual

1. Úvod

This manual provides essential information for the safe and effective use of your X-PRO 12V 35/35W Head Light Bulb Xenon. Designed for scooters, ATVs, and Go Karts, this bulb offers bright and long-lasting illumination. Please read this manual thoroughly before installation and operation.

2. Vlastnosti produktu

• Head Light Bulb for Scooters, ATVs, Go Karts.
• Specification: 12V, 35/35W.
• Filled with Xenon gas for enhanced performance.
• Provides bright light and ensures long-lasting operation.

3. Bezpečnostní informace

VAROVÁNÍ:

• Always disconnect the vehicle's battery before attempting any electrical work to prevent electric shock.
• Allow the old bulb to cool down completely before handling, as it can be extremely hot.
• Avoid touching the glass part of the new bulb with bare hands. Oils from your skin can create hot spots and reduce bulb life. Use clean gloves or a cloth.
• Ensure the replacement bulb matches the vehicle's specifications (voltage, wattage, and base type).
• If unsure about the installation process, consult a qualified mechanic or refer to your vehicle's service manual.
• Uchovávejte mimo dosah dětí.

4. Nastavení a instalace

This section outlines the general steps for replacing a headlight bulb. Specific procedures may vary depending on your vehicle model. Always refer to your vehicle's owner's manual for detailed instructions.

1. Příprava: Park your vehicle on a level surface, turn off the engine, and engage the parking brake. Ensure the headlights are off and cool.
2. Přístup k sestavě světlometu: Depending on your vehicle, you may need to open the hood/front panel or access the headlight from behind the fairing. Some vehicles may require removal of other components to gain access.
3. Odpojit napájení: Locate the electrical connector attached to the back of the headlight bulb. Gently squeeze or unclip the connector and pull it off.
4. Remove Retaining Mechanism: Headlight bulbs are typically held in place by a spring clip, a twist-lock mechanism, or a retaining ring. Carefully disengage this mechanism.
5. Vyjměte starou žárovku: Grasp the base of the old bulb (not the glass) and carefully pull it straight out. Dispose of the old bulb responsibly.
6. Instalace nové žárovky: Holding the new X-PRO bulb by its base (using gloves or a clean cloth), align the tabs on the bulb with the notches in the headlight housing. Gently push the bulb straight in until it is seated firmly.
7. Bezpečná žárovka: Re-engage the retaining mechanism to secure the new bulb in place.
8. Znovu připojte napájení: Reattach the electrical connector to the back of the new bulb, ensuring it clicks securely into place.
9. Test funkčnosti: Reconnect the vehicle's battery (if disconnected) and turn on the headlights to verify proper operation. Check both high and low beams.
10. Znovu sestavit: Reinstall any components that were removed to access the headlight.

Figure 4.1: X-PRO 12V 35/35W Head Light Bulb Xenon. This image shows the compact design of the bulb, featuring a blue-tinted glass envelope and a metallic base with electrical contacts, ready for installation.

5. Návod k obsluze

Once the X-PRO 12V 35/35W Head Light Bulb Xenon is correctly installed, its operation is integrated with your vehicle's electrical system. Simply turn on your vehicle's ignition and activate the headlight switch as you normally would. The bulb will illuminate, providing the necessary light for safe operation.

6. Údržba

The X-PRO Head Light Bulb Xenon is designed for long-lasting performance with minimal maintenance. However, periodic checks can help ensure optimal illumination:

• Pravidelná kontrola: Periodically check your headlights to ensure both high and low beams are functioning correctly.
• Čištění: If the headlight lens becomes dirty, clean it with a soft, damp hadříkem. Nepoužívejte abrazivní čisticí prostředky, které by mohly poškrábat čočku.
• Výměna žárovky: If the bulb dims significantly or fails, replace it following the installation steps outlined in Section 4. Always replace bulbs in pairs if possible, as bulbs of similar age tend to fail around the same time.

7. Řešení problémů

If your X-PRO Head Light Bulb Xenon is not functioning as expected, consider the following troubleshooting steps:

If problems persist after attempting these solutions, it is recommended to consult a qualified vehicle technician.

8. Specifikace

9. Záruka a podpora

For warranty information and customer support regarding your X-PRO 12V 35/35W Head Light Bulb Xenon, please contact X-PRO directly through their official webnebo prodejce, od kterého jste produkt zakoupili. Uschovejte si doklad o koupi pro případné reklamace.

X-PRO is committed to providing quality powersports accessories and parts.

Navštivte X-PRO Store on Amazon pro více produktů a informací.