BN-LINK 24hodinový mechanický časovač do zásuvky

1. Úvod

The BN-LINK 24-Hour Plug-in Mechanical Timer (Model FD-60-U1) is designed to automate the operation of various electrical devices by turning them ON and OFF at pre-set times. This grounded timer offers convenience and energy savings for a wide range of indoor applications.

Obrázek 1: BN-LINK 24hodinový mechanický časovač do zásuvky, přední strana view.

2. Bezpečnostní informace

• Pouze pro vnitřní použití.
• Do not exceed electrical ratings: 125VAC, 60 Hz, 1875W, 15A Resistive, 8A Tungsten, 1/2HP.
• Ensure the timer is securely plugged into a grounded electrical outlet.
• Neponořujte do vody a nepoužívejte ve vlhkém prostředí.
• Před čištěním odpojte časovač.
• Uchovávejte mimo dosah dětí.

3. Konec produktuview

Image 2: Labeled diagram of the timer's components.

• Ciferník hodin: Displays 24-hour time.
• Šipka: Označuje aktuální čas.
• Připínáčky: Small segments around the dial. Each pin represents 15 minutes. Pushed down = ON, Pulled up = OFF.
• Posuvný přepínač: Allows selection between 'ON' (always on) and 'TIMER' (follows programmed schedule).
• Output Indicating Light: Illuminates when the connected device is receiving power.
• Uzemněná zásuvka: Where the appliance is plugged in.

4. Nastavení

1. Prepare Pins: Ensure all push pins around the clock dial are in the UP (OFF) position before programming.
2. Nastavit aktuální čas: Rotate the clock dial clockwise until the white arrow aligns with the current time of day. The dial uses a 24-hour format (e.g., 13 for 1 PM, 18 for 6 PM).
3. Připojit: Insert the timer into a grounded 3-prong electrical outlet.

5. Návod k obsluze

Image 3: Pins pushed down activate the device; pins pulled up deactivate it.

1. Časy zapnutí/vypnutí programu: Push down the pins corresponding to the desired ON time. Each pushed-down pin represents 15 minutes of ON time. Leave pins in the UP position for desired OFF times. You can set up to 96 ON/OFF programs per day.
2. Připojit zařízení: Plug your electrical appliance into the grounded outlet on the timer.
3. Vyberte režim: Slide the red switch on the side of the timer to the 'TIMER' position for automatic operation based on your programmed schedule. To keep the device continuously ON, slide the switch to the 'ON' position.
4. The timer will automatically cycle through your programmed settings daily. The red output indicating light will illuminate when the device is ON.

6. Aplikace

This versatile mechanical timer can be used to automate various devices and systems:

• Aquariums and Terrariums (lighting, pumps)
• Grow Lights for Hydroponics and Indoor Plants
• Indoor Lighting (lamps, holiday decorations)
• Small Home Appliances (coffee makers, fans, humidifiers)
• Security Lighting (to simulate occupancy)

Obrázek 4: Příkladamples of timer applications including humidifiers, lamps, fans, grow lights, aquariums, and coffee machines.

7. Specifikace

Image 5: Product dimensions and electrical ratings.

8. Řešení problémů

• Zařízení se nezapíná/nevypíná:
  • Ujistěte se, že je časovač bezpečně zapojený do zásuvky.
  • Zkontrolujte, zda je spotřebič správně zapojen do časovače.
  • Check that the side switch is set to 'TIMER' mode.
  • Confirm that the push pins for the desired ON/OFF times are correctly set (down for ON, up for OFF).
  • Ensure the current time arrow is aligned with the actual time on the dial.
• Časovač se neposouvá vpřed:
  • The timer's motor may be stuck. Gently rotate the dial to see if it frees up.
  • Ensure the timer is receiving power.
• Hlasitý tikající zvuk:
  • Mechanical timers typically produce a soft ticking sound. If the noise is excessively loud or unusual, discontinue use and contact customer support.

9. Záruka a podpora

For warranty information, technical support, or any questions regarding your BN-LINK Mechanical Timer, please refer to the contact information provided with your product packaging or visit the official BN-LINK webmísto.

Always ensure to follow all safety guidelines and operating instructions to prevent damage or injury.