Connects2 CTSSA002.2

CTSSA002.2 Car Accessory User Manual

Model: CTSSA002.2

1. Konec produktuview

The Connects2 CTSSA002.2 is a specialized car accessory designed to facilitate the integration of aftermarket car audio systems with the existing steering wheel controls of specific SAAB vehicle models. This interface ensures that the original steering wheel buttons, such as volume control, track skip, and mode selection, remain functional after upgrading your car's head unit.

Klíčové vlastnosti:

  • Enables steering wheel control functionality with aftermarket head units.
  • Designed for SAAB 43533 (1998 - 2002) and SAAB 43594 (1998 - 2002) models.
  • Excludes vehicles with automatic transmission.
  • Official Connects2 brand product, known for interface solutions.
Connects2 CTSSA002.2 Car Accessory with wiring harnesses

Image: The Connects2 CTSSA002.2 Car Accessory. This image displays the main electronic module, which is black and rectangular with the 'Connects2' logo, along with various multi-colored wiring harnesses and connectors. These components are essential for connecting the accessory to the vehicle's electrical system and the aftermarket head unit.

2. Nastavení a instalace

Installation of the CTSSA002.2 requires basic knowledge of car audio wiring and vehicle electronics. It is recommended that installation be performed by a qualified professional.

  1. Příprava: Ensure the vehicle's ignition is off and disconnect the negative terminal of the car battery to prevent electrical shorts.
  2. Zapojení přístupového vozidla: Carefully remove the existing car stereo or access the vehicle's wiring harness behind the dashboard. Refer to your vehicle's service manual for specific instructions on accessing these components.
  3. Identifikujte připojení: Identify the vehicle's factory wiring harness for the steering wheel controls and power.
  4. Připojení rozhraní: Connect the CTSSA002.2 accessory's wiring harnesses to the corresponding vehicle wiring and the aftermarket head unit. Ensure all connections are secure and correctly matched according to the wiring diagram provided with your specific head unit and the Connects2 accessory (if a separate diagram is included).
  5. Zabezpečené komponenty: Once all connections are made, secure the CTSSA002.2 module and excess wiring to prevent rattling or interference.
  6. Test funkčnosti: Reconnect the car battery. Turn on the ignition and the aftermarket head unit. Test all steering wheel control functions (volume up/down, track skip, mode, etc.) to ensure they operate correctly.
  7. Znovu sestavit: Opatrně sestavte zpět součásti palubní desky.

Důležité: This accessory is compatible with SAAB 43533 (1998 - 2002) and 43594 (1998 - 2002) models. It is not compatible with vehicles equipped with automatic transmission.

3. Návod k obsluze

Once the CTSSA002.2 Car Accessory is correctly installed, its operation is seamless and integrated with your vehicle's existing steering wheel controls. The accessory acts as a bridge, translating the signals from your factory steering wheel buttons into commands that your aftermarket head unit can understand.

Provozovat:

  • Ensure your aftermarket head unit is powered on.
  • Use the steering wheel buttons as you normally would for functions such as:
    • Zvýšení/snížení hlasitosti
    • Track Next/Previous
    • Výběr režimu/zdroje
    • Mute (if applicable)
  • The response of the head unit to these commands should be immediate and accurate.

No direct interaction with the CTSSA002.2 module itself is required during normal operation.

4. Údržba

The Connects2 CTSSA002.2 Car Accessory is designed for long-term, maintenance-free operation. As an electronic interface, it requires minimal upkeep.

  • Udržujte v suchu: Ensure the module remains dry and is not exposed to moisture or extreme temperatures.
  • Zabezpečená připojení: Periodically, if accessible, check that all wiring connections remain secure and free from corrosion. Loose connections can lead to intermittent functionality.
  • Čištění: If the module becomes dusty, gently wipe it with a dry, soft cloth. Do not use liquid cleaners or solvents.

No user-serviceable parts are inside the unit. Do not attempt to open or repair the accessory.

5. Řešení problémů

If you encounter issues with your CTSSA002.2 Car Accessory, please refer to the following troubleshooting guide:

ProblémMožná příčinaŘešení
Ovládání na volantu nefunguje.Nesprávné zapojení kabelů.
Incompatible head unit or vehicle.
Head unit not configured for steering wheel controls.
Double-check all wiring connections against the installation guide.
Verify your vehicle and head unit compatibility.
Consult your head unit's manual for steering wheel control setup.
Intermittent control response.Uvolněná spojení.
Elektrické rušení.
Ujistěte se, že všechna připojení jsou pevně usazena.
Check for any exposed wires or poor insulation.
Only some controls work.Incorrect programming/mapping.
Head unit limitation.
Some aftermarket head units require programming of steering wheel buttons. Refer to your head unit's manual.
Not all steering wheel buttons may be supported by every aftermarket head unit.
No power to the accessory.Spálená pojistka.
Nesprávné připojení napájení.
Check the vehicle's fuse box and any inline fuses for the head unit/accessory.
Verify the power and ground connections are correct and secure.

If the problem persists after following these steps, please contact Connects2 customer support or a qualified installer.

6. Specifikace

AtributDetail
ZnačkaPřipojuje 2
ModelCTSSA002.2
Hmotnost položky4.2 unce
Rozměry produktu11.81 x 9.84 x 1.97 palce
Číslo dílu výrobceCTSSA002.2
ASINB00MQRFRN0
KompatibilitaSAAB 43533 (1998 - 2002), SAAB 43594 (1998 - 2002) - Excluding vehicles with automatic transmission
Zahrnuté komponentyCar accessory (interface module and wiring)
Datum první dostupnosti15. srpna 2014

7. Informace o záruce

The Connects2 CTSSA002.2 Car Accessory comes with a 2-letá záruka on any new Connects2 component. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.

For specific warranty terms and conditions, or to initiate a warranty claim, please refer to the official Connects2 webnebo kontaktujte jejich zákaznickou podporu.

8. Podpora a kontakt

For further assistance, technical support, or inquiries regarding the CTSSA002.2 Car Accessory, please contact Connects2 through their official channels:

  • Oficiální Webmísto: Navštivte Připojuje 2 webmísto pro informace o produktech, nejčastější dotazy a zdroje podpory.
  • Global Network: Connects2 operates through a global network of retailers and distributors. You may contact your local retailer or distributor for immediate support.
  • Služby zákazníkům: Refer to the Connects2 website for direct customer service contact information, including phone numbers or email addresses.

When contacting support, please have your product model (CTSSA002.2) and vehicle details readily available.

Související dokumenty - CTSSA002.2

Předview Instalační manuál univerzálního ovládání na volantu Connects2 UNI-SWC.4
Komplexní návod k obsluze pro Connects2 UNI-SWC.4 s podrobným popisem instalace, připojení rozhraní, nastavení DIP přepínačů a informacemi o zapojení specifických vozidel pro CAN-Bus a analogová vozidla.
Předview Návod k obsluze rozhraní pro ovládání na volantu Connects2 CTSNS017.2 Nissan
Návod k obsluze pro Connects2 CTSNS017.2, rozhraní pro ovládání na volantu určené k zachování původních ovládacích prvků na volantu ve vozidlech Nissan. Zahrnuje instalaci, zapojení a kompatibilitu s modely X-Trail, Almera, Primera a Terrano.
Předview Instalační příručka rozhraní pro ovládání z volantu Saab Connects2 CTSSA002.2
Instalační příručka a technické informace pro rozhraní Connects2 CTSSA002.2, které umožňuje vozidlům Saab 9-3 (YS3F) a 9-5 (1998-2002) zachovat funkčnost ovládání na volantu s neoriginálními hlavními jednotkami. Obsahuje kódy zapojení a montážní pokyny.
Předview Connects2 CTSBM009.2 BMW Steering Wheel Control Interface Installation Manual
Installation manual for the Connects2 CTSBM009.2 BMW Steering Wheel Control Interface. This guide provides fitting instructions, application lists, and technical support information for retaining steering wheel controls, warning tones, and parking sensor audio in compatible BMW vehicles.
Předview 29-CTSNS021 Rozhraní pro ovládání na volantu pro vozidla Nissan - Instalační průvodce
Installation guide for the 29-CTSNS021 Steering Wheel Control Interface for Nissan vehicles. This interface retains factory steering wheel controls, reverse camera, and aux/USB inputs, and provides speed pulse, park brake, and reverse gear outputs for Nissan Micra 2017> models.
Předview Connects2 CTSTY009.2 Rozhraní pro ovládání na volantu Toyota - Instalační manuál
Návod k obsluze pro Connects2 CTSTY009.2, rozhraní pro ovládání na volantu pro analogová vozidla Toyota. Obsahuje Aux, USB, OEM kameru a JBL. Amplifier functions, and supports both 20-pin and 28-pin connectors for easy installation.