MaxMate 3" Nerf Bars WB2T31217 Installation Manual

1. Úvod

This manual provides detailed instructions for the proper installation, operation, and maintenance of your MaxMate 3-inch Nerf Bars, Model WB2T31217. These side steps are designed to enhance vehicle accessibility and appearance. Please read all instructions carefully before beginning installation to ensure a safe and correct setup.

2. Kompatibilita

These MaxMate 3-inch Nerf Bars are specifically designed for:

• 2000-2006 Toyota Tundra Access Cab

Důležitá poznámka:

These nerf bars are ONLY compatible with Access Cab models, which feature 2 full-size front doors and 2 suicided rear doors. They are NOT compatible with Double Cab models (4 full-size doors) or Regular Cab models (2 doors only).

Image: Compatibility diagram illustrating the correct 2000-2006 Toyota Tundra Access Cab configuration for these nerf bars.

3. Obsah balení

Upon opening the package, verify that all components are present and undamaged. If any parts are missing or damaged, please contact customer support immediately.

• Driver Side Nerf Bar (1)
• Passenger Side Nerf Bar (1)
• Mounting Bracket Kit (includes all necessary brackets and hardware)

Image: The product packaging for MaxMate Nerf Bars, showing a long cardboard box with the MaxMate logo, secured on a wooden pallet.

4. Bezpečnostní informace

• Během instalace vždy používejte vhodné ochranné pomůcky, včetně rukavic a ochrany očí.
• Ujistěte se, že vozidlo je zaparkované na rovném povrchu a je zatažená parkovací brzda.
• Do not overtighten bolts, as this can strip threads or damage components. Refer to torque specifications if available.
• Regularly inspect the nerf bars and mounting hardware for any signs of wear, damage, or looseness.
• Během instalace držte děti a domácí zvířata mimo pracovní prostor.

5. Nastavení (instalace)

Installation is designed to be straightforward and typically takes approximately 20 minutes. No drilling is required for this installation.

Požadované nástroje:

• Socket Wrench Set
• Ráčna
• Momentový klíč (doporučeno)

Kroky instalace:

1. Určete místa montáže: Locate the pre-drilled mounting holes on the rocker panel of your Toyota Tundra Access Cab. These are typically found along the underside of the vehicle, near the pinch weld.
2. Připevněte držáky: Secure the provided mounting brackets to the vehicle's frame using the supplied hardware. Ensure the brackets are oriented correctly for the driver and passenger sides. Hand-tighten bolts initially.
3. Position Nerf Bar: Carefully lift the nerf bar into position and align it with the attached mounting brackets.
4. Secure Nerf Bar: Attach the nerf bar to the brackets using the remaining hardware. Again, hand-tighten all bolts to allow for minor adjustments.
5. Seřízení a utažení: Once the nerf bar is properly aligned and level, fully tighten all bolts to the manufacturer's recommended torque specifications (if available, otherwise ensure they are securely fastened without overtightening).
6. Opakujte pro druhou stranu: Follow the same steps for installing the nerf bar on the opposite side of the vehicle.
7. Závěrečná kontrola: Double-check all connections to ensure they are secure and that the nerf bars are firmly attached to the vehicle.

Image: A pair of MaxMate 3-inch polished stainless steel nerf bars, featuring black non-slip step pads, ready for installation.

Zdroje instalačních videí:

The following videos provide a general overview of the product or may assist with installation. Please note that specific installation steps may vary slightly depending on the exact vehicle model and year.

6. Provoz (použití)

Once installed, the MaxMate Nerf Bars provide a stable and secure step for easier entry and exit from your vehicle. The wide step pads offer a non-slip surface for safety.

• Step onto the nerf bar with one foot, ensuring firm footing on the non-slip pad.
• Use the vehicle's door frame or handle for additional support if needed.
• Avoid excessive weight or jumping on the nerf bars, as this can cause damage or injury.

7. Údržba

To ensure the longevity and appearance of your MaxMate Nerf Bars, follow these maintenance guidelines:

• Čištění: Clean the stainless steel tubes and step pads regularly with mild soap and water. Avoid abrasive cleaners or harsh chemicals that can damage the finish. Rinse thoroughly and dry with a soft cloth to prevent water spots.
• Inspekce: Periodically inspect all mounting hardware (bolts, nuts, brackets) for tightness. Vibrations from driving can cause fasteners to loosen over time. Re-tighten as necessary.
• Kontrola poškození: Check the nerf bars for any signs of physical damage, such as dents, bends, or cracks, especially after off-road use or impacts.
• Prevence proti korozi: Although made of polished stainless steel, regular cleaning helps prevent the buildup of corrosive elements, especially in areas exposed to road salt or harsh weather.

8. Řešení problémů

If you encounter any issues with your MaxMate Nerf Bars, consider the following common solutions:

• Loose or Rattling Noise: This is typically caused by loose mounting hardware. Re-inspect and tighten all bolts and nuts securely.
• Obtížnost krokování: Ensure the nerf bars are installed level and at the correct height. Re-check the installation steps and vehicle compatibility.
• Rezavé skvrny: While stainless steel is rust-resistant, surface rust can occur from environmental factors. Use a stainless steel cleaner and a non-abrasive pad to remove spots. Regular cleaning helps prevent this.
• Damaged Step Pads: If step pads become worn or damaged, contact customer support for potential replacement options.

If problems persist after troubleshooting, contact MaxMate customer support for further assistance.

9. Specifikace

10. Záruka

MaxMate offers a Omezená záruka 5 rok against manufacturer defects for customers in the US. This warranty covers defects in materials and workmanship under normal use and service. It does not cover damage resulting from improper installation, accident, misuse, abuse, neglect, normal wear and tear, or unauthorized modification.

For warranty claims, please retain your proof of purchase and contact MaxMate customer support.

11. Zákaznická podpora

If you have any questions, require assistance with installation, or need to report a missing/damaged part, please contact MaxMate customer support. Refer to your product packaging or the retailer's webstránky s nejaktuálnějšími kontaktními informacemi.

When contacting support, please have your product model number (WB2T31217) and proof of purchase readily available.