MaxMate 3-inch Stainless Steel Nerf Bars

Zavedení

This manual provides detailed instructions for the installation, operation, and maintenance of your MaxMate 3-inch Stainless Steel Nerf Bars (Model WB2C33807). These side step rails are designed to enhance vehicle accessibility and appearance. Please read this manual thoroughly before installation and use to ensure proper function and safety.

Kompatibilita produktu

The MaxMate WB2C33807 Nerf Bars are compatible with the following vehicle models:

• 1988-1998 Chevy/GMC C/K Pickup Regular Cab
• 1992-1994 Chevy Blazer 2-Door (Exclude ZR2)
• 1995-1999 Chevy Tahoe 2-Door
• 1992-1999 GMC Yukon 2-Door

Poznámka: Not compatible with vehicles equipped with power retracting boards.

Vlastnosti produktu

• Elegant Curved Tube Design: Captivating round tubes wrap along the contour of the vehicle's rocker panels for a stylish look. The curved design provides a wider profile for safer entry and exit.
• Polished Stainless Steel Finish: Constructed from heavy-duty 3-inch round polished stainless steel tubes, offering rust and corrosion resistance.
• UV Resistant Non-Slip Step Pads: Features wide step pads designed to provide secure footing in various weather conditions.
• Odolná konstrukce: Engineered for long-lasting performance and durability.

Nastavení a instalace

Installation of the MaxMate Nerf Bars is designed to be straightforward and typically takes approximately 20 minutes. No drilling is required for most installations.

Obsah balení:

• Driver side step bar (1)
• Passenger side step bar (1)
• Mounting bracket kit (includes all necessary brackets and hardware)

Kroky instalace:

1. Rozbalte komponenty: Carefully remove all components from the packaging and verify that all parts listed above are present.
2. Určete montážní body: Locate the factory mounting points on your vehicle's rocker panel. These are typically pre-drilled holes in the vehicle's frame or body.
3. Připevněte držáky: Secure the mounting brackets to the vehicle's frame using the provided hardware. Ensure all bolts are hand-tightened initially.
4. Position Nerf Bars: Attach the nerf bars to the installed brackets. The brackets are adjustable, allowing you to position the step bars closer to the body or slightly lower, depending on preference and vehicle height.
5. Konečné utažení: Once the nerf bars are correctly positioned and level, fully tighten all bolts to the manufacturer's recommended torque specifications. Refer to the specific hardware instructions for torque values.

For a visual guide on installation and usage, please refer to the video below:

Návod k obsluze

To use your MaxMate Nerf Bars:

1. Step onto the Bar: Place your foot firmly on the non-slip step pad of the nerf bar. Ensure your entire foot is on the pad for maximum stability.
2. Enter/Exit Vehicle: Use the nerf bar as a stable step to assist in entering or exiting your vehicle.

Údržba

To ensure the longevity and appearance of your MaxMate Nerf Bars:

• Pravidelný úklid: Clean the stainless steel surfaces and non-slip pads regularly with mild soap and water. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
• Zkontrolujte spojovací prvky: Periodically check all mounting bolts and fasteners to ensure they remain tight. Re-tighten if necessary to prevent loosening due to vehicle vibration or road conditions.
• Zkontrolujte poškození: Inspect the nerf bars for any signs of damage, such as dents, cracks, or corrosion. Address any issues promptly to maintain structural integrity and appearance.

Odstraňování problémů

• Loose or Wobbly Step Bars: If the step bars feel loose, check all mounting bolts and brackets. Ensure they are securely tightened. Over time, bolts can loosen due to vibrations.
• Obtížnost s instalací: If you encounter difficulties during installation, double-check the compatibility with your specific vehicle model and cab type. Ensure you are using the correct mounting points and hardware. Some users have reported needing slightly longer bolts for lifted trucks; verify if this applies to your setup.
• Corrosion or Rust Spots: While made of stainless steel, prolonged exposure to harsh elements or certain chemicals can cause surface discoloration. Clean immediately with appropriate stainless steel cleaner and avoid prolonged contact with road salts or strong acids.

Specifikace

Informace o záruce

MaxMate offers a Limited 5 Year Warranty against manufacturer defects for customers in the US. Please retain your proof of purchase for warranty claims. For detailed terms and conditions, refer to the warranty documentation included with your product or contact MaxMate customer support.

Podpora

For further assistance, technical support, or to inquire about replacement parts, please visit the official MaxMate website or contact their customer service department. Contact information can typically be found on the product packaging or the brand's online store.