Mount-It! MI-863 3-in-1 TV Stand with Mount and Glass Shelves Instruction Manual

Zavedení

Thank you for choosing the Mount-It! MI-863 3-in-1 TV Stand. This product is designed to provide a stable and stylish solution for mounting your flat-screen television and organizing your audio/video components. This manual contains important information regarding the safe assembly, operation, and maintenance of your new TV stand. Please read these instructions thoroughly before beginning assembly and retain them for future reference.

Figure 1: Mount-It! MI-863 3-in-1 TV Stand with Mount and Glass Shelves

Bezpečnostní informace

Please observe the following safety precautions to prevent injury or damage to your product:

• Přečtěte si všechny pokyny: Ensure you understand all assembly steps before proceeding. If you have questions, contact Mount-It! customer support.
• Nosnost: Do not exceed the maximum weight capacity for the TV mount or glass shelves. Refer to the Specifications section for details.
• Správné nástroje: Use the correct tools as specified in the assembly instructions.
• Dvoučlenná montáž: For safety, it is recommended that two people assemble this product, especially when handling the TV and glass shelves.
• Úroveň povrchu: Always place the TV stand on a flat, level, and stable surface to prevent tipping.
• Správa kabelů: Route all cables carefully to avoid tripping hazards and to prevent cables from being pinched or damaged.
• Děti a domácí mazlíčci: Keep children and pets away from the assembly area. Do not allow children to climb on or play with the TV stand.
• Tvrzené sklo: Handle glass shelves with care. Avoid impacts to the edges of the glass.

Obsah balení

Verify that all components are present and undamaged before beginning assembly. If any parts are missing or damaged, do not proceed with assembly and contact Mount-It! customer support.

• Hlavní podpůrný sloup
• TV Mounting Bracket (VESA compatible)
• Three (3) Tempered Glass Shelves
• Základní deska
• Support Pillars for Glass Shelves
• Hardware Kit (screws, washers, spacers for assembly and TV attachment)
• Montážní nářadí (např. imbusový klíč)

Obrázek 2: Přesview of TV Stand components

Pokyny k instalaci a montáži

Follow these steps carefully for proper assembly. It is recommended to have a second person assist with assembly.

1. Připravte si základ: Place the base plate on a clean, flat surface. Attach the main support column to the base plate using the provided screws and tools. Ensure it is securely fastened.
2. Install Lower Glass Shelves: Attach the support pillars for the lower shelves to the main support column and the base plate. Carefully place the bottom tempered glass shelf onto these pillars, securing it with the appropriate hardware. Repeat for the middle shelf.
3. Install Top Glass Shelf: Attach the remaining support pillars for the top shelf. Carefully place the top tempered glass shelf onto these pillars, securing it.


Figure 3: Detail of glass shelf and support pillar connection

4. Připevnění držáku pro upevnění televizoru: Secure the TV mounting bracket to the top of the main support column using the designated screws. Ensure the bracket is oriented correctly and tightened firmly.


Figure 4: TV mounting bracket detail

5. Příprava televizoru k montáži: Identify the VESA mounting holes on the back of your television. Attach the vertical TV brackets (part of the mounting bracket assembly) to your TV using the appropriate screws, washers, and spacers from the hardware kit. Ensure the brackets are centered and securely fastened to your TV.
6. Montáž televizoru: With assistance, carefully lift your television and hook the attached vertical TV brackets onto the horizontal bar of the TV mounting bracket on the stand. Once hooked, gently lower the TV into place. Secure the TV to the stand by tightening the safety screws located at the bottom of the vertical TV brackets. This prevents accidental lifting or movement.


Figure 5: Television mounted on the stand

7. Správa kabelů: Utilize the integrated cable management channels within the main support column to route and conceal your TV and component cables for a clean and organized appearance.

Návod k obsluze

The Mount-It! MI-863 TV Stand is designed for straightforward use.

• Umístění TV: Ensure your TV is securely attached to the mounting bracket as per the assembly instructions. The mount allows for slight height adjustments during installation.
• Umístění komponent: Place your cable box, DVD player, gaming consoles, and other AV components on the tempered glass shelves. Distribute weight evenly across the shelves.
• Funkce otočení: The TV mount may offer a limited swivel range. Gently rotate the TV to achieve your desired viewing angle. Do not force the TV beyond its intended swivel limits.

Údržba

Pravidelná údržba pomůže prodloužit životnost a vzhled vašeho televizního stolku.

• Čištění: Použijte měkký, damp cloth to clean the steel frame. For the tempered glass shelves, use a glass cleaner and a microfiber cloth to avoid streaks. Avoid abrasive cleaners or harsh chemicals.
• Kontrola hardwaru: Pravidelně kontrolujte všechny šrouby a vruty, zda jsou pevně utažené. V případě potřeby je dotáhněte, ale nepřetahujte je.
• Inspekce: Inspect the glass shelves for any chips or cracks. If damage is found, contact customer support for replacement options.

Odstraňování problémů

If you encounter issues with your Mount-It! MI-863 TV Stand, refer to the following common solutions:

• Stojan je nestabilní:
  • Ujistěte se, že stojan stojí na rovném a vodorovném povrchu.
  • Zkontrolujte, zda jsou všechny montážní šrouby bezpečně utažené.
  • Verify that the TV weight does not exceed the stand's capacity.
• TV není vodorovně:
  • Adjust the vertical TV brackets on the back of your television before mounting.
  • Ensure the main support column is straight and securely attached to the base.
• Cables are Visible/Messy:
  • Utilize the cable management channels in the main support column.
  • Consider using cable ties or sleeves to bundle cables neatly.

If these solutions do not resolve your issue, please contact Mount-It! customer support for further assistance.

Specifikace

Obrázek 6: Rozměry produktu

Záruka a podpora

Mount-It! stands behind its products. For warranty information, technical assistance, or any questions regarding your MI-863 TV Stand, please contact our US-Based Customer Support team. Contact details can typically be found on the Mount-It! official webmístě nebo na obalu produktu.