Konec produktuview
The Moen 3814ORB Brantford Diverter Tub Spout is designed to restore your bathing area's functionality and aesthetic. Featuring an Oil-Rubbed Bronze finish, it offers a rich, dark brown appearance with striking light and dark accents, complementing traditional bathroom designs. This tub spout includes a lift rod for diverting water flow between the tub and a showerhead, ensuring versatile use.
Constructed from corrosion-resistant metal, this spout is built for durability and designed for straightforward installation. It accommodates most bathtubs with its 7.25-inch length.
Image: Moen Brantford 1/2-Inch Diverter Tub Spout, Oil Rubbed Bronze finish.
Nastavení a instalace
This section provides general guidance for installing the Moen 3814ORB tub spout. While designed for hassle-free installation, professional plumbing assistance is recommended if you are unfamiliar with plumbing work.
Important Note on Connection Type:
Please be aware that despite the product title, this tub spout features a závitové připojení, not a slip-fit connection. Ensure your existing plumbing is compatible or prepared for a threaded installation. This may require a brass nipple and appropriate coupler if replacing a rear-threaded spout.
- Připravte oblast: Turn off the main water supply to your bathroom. Drain any remaining water from the pipes by opening the existing tub spout and shower valve.
- Odstraňte starý výtok: Depending on your current spout type, you may need to unscrew it or loosen a set screw underneath. Clean the pipe and wall area thoroughly.
- Připravte potrubí: Ensure the pipe extending from the wall is clean and free of debris. For threaded connections, apply plumber's tape (Teflon tape) clockwise around the threads of the pipe to ensure a watertight seal.
- Instalace nového výtoku: Carefully thread the Moen 3814ORB tub spout onto the pipe. Turn clockwise until it is hand-tight, then use a wrench to tighten it an additional quarter to half turn, ensuring the spout is level and facing forward. Do not overtighten.
- Zkouška těsnosti: Slowly turn the main water supply back on. Check for any leaks around the base of the new tub spout. If leaks occur, turn off the water, tighten slightly, and re-test.
Návod k obsluze
The Moen Brantford Diverter Tub Spout is designed for simple operation to switch between tub filling and showering.
- Tub Filling: To fill the bathtub, ensure the diverter lift rod on top of the spout is in the down position. Water will flow directly from the spout into the tub.
- sprchování: To divert water to your showerhead, pull the lift rod upwards. This will redirect the water flow from the tub spout to the connected showerhead. Once you are finished showering, push the lift rod back down to resume water flow to the tub spout.
Údržba a péče
To maintain the beauty and functionality of your Moen Brantford Oil-Rubbed Bronze tub spout, follow these care guidelines:
- Pravidelný úklid: Pravidelně čistěte výlevku měkkým hadříkemamp hadříkem. Na odolné skvrny použijte jemný roztok mýdla a vody. Důkladně opláchněte a osušte měkkým hadříkem, abyste zabránili vzniku skvrn od vody.
- Vyhněte se drsným čisticím prostředkům: Do not use abrasive cleaners, harsh chemicals, ammonia-based products, or polishing agents, as these can damage the Oil-Rubbed Bronze finish and void the warranty.
- Chraňte povrch: The Oil-Rubbed Bronze finish is designed to be durable and corrosion-resistant. Avoid scratching the surface with sharp objects or abrasive materials.
- Zkontrolujte netěsnosti: Periodically inspect the connection point for any signs of leaks. Address any leaks promptly to prevent water damage.
Odstraňování problémů
This section addresses common issues you might encounter with your tub spout.
| Problém | Možná příčina | Řešení |
|---|---|---|
| Z dna výlevky vytéká voda. | Volné spojení nebo nedostatečná instalatérská páska. | Turn off water supply, remove spout, reapply plumber's tape to pipe threads, and re-install, ensuring a snug fit. Do not overtighten. |
| Water does not fully divert to the showerhead. | Diverter mechanism issue or low water pressure. | Ensure the lift rod is fully pulled up. Check household water pressure. If the issue persists, the diverter mechanism may need inspection by a qualified plumber. |
| Spout is difficult to install due to connection type. | Misunderstanding of threaded vs. slip-fit connection. | Tento model je závitové. If your existing plumbing requires a slip-fit, you will need to adapt the pipe (e.g., by adding a brass nipple) or consider a different product. Consult a plumber for assistance. |
Specifikace
- Značka: Moen
- Název modelu: Brantford
- Číslo dílu: 3814 ORB
- Barva: Olejem třený bronz
- Materiál: Kov
- Typ montáže: Držák na zeď
- Délka hubice: 7.25 inches (accommodates most bathtubs)
- Typ připojení: Threaded (1/2-Inch)
- Zahrnuté komponenty: Vana výtok
- Hmotnost položky: 1.37 libry
- Rozměry produktu: 11.75 x 5.88 x 3.69 palce
- Speciální vlastnosti: Intricate Architectural Details, Diverter Function
- UPC: 026508251065
Záruka a podpora
The Moen 3814ORB Brantford Diverter Tub Spout is backed by Moen's Limited Lifetime Warranty. This warranty covers defects in material and manufacturing for the original consumer purchaser.
For detailed warranty information, product support, or to contact customer service, please visit the official Moen webwebu nebo se podívejte do záruční dokumentace dodané s vaším nákupem.
Moen Official Webmísto: www.moen.com
