Zavedení
The Intermatic EC200WK Electronic Countdown Timer provides efficient and convenient control over various electrical loads. Designed for ease of use and silent operation, this timer is an ideal replacement for standard single-pole switches, offering energy savings and enhanced control for lighting, fans, and other appliances.
Image: The Intermatic EC200WK timer, a white wall-mounted unit with buttons for 5, 10, 15, 30 minutes, and a 'HOLD' function.
Vlastnosti produktu
- Efektivní ovládání: Manages LED, CFL lights, fans, motors, heaters, and more with versatile time ranges of 5, 10, 15, and 30 minutes.
- Tichý provoz: Ensures quiet performance, suitable for various applications including indoor and outdoor lighting, bathroom fans, ventilation, and self-storage units.
- Snadná výměna: Designed for effortless replacement of single-pole switches, providing energy savings, security, and convenience.
- Všestranné aplikace: Ideal for bathroom fan timer switches, exhaust fan controls, and automatic shut-off for lights and appliances.
- Spolehlivý výkon: UL listed with specifications for resistive, tungsten, inductive ballast, and electronic ballast loads, ensuring consistent and efficient performance.
Nastavení a instalace
Installation of the EC200WK timer is straightforward for those familiar with basic electrical wiring. It is designed to replace existing single-pole switches. A neutral wire connection is required for proper operation.
Bezpečnostní opatření:
- Před zahájením instalace vždy vypněte napájení jističem nebo pojistkovou skříňkou.
- Pokud si nejste jisti některou částí instalace, poraďte se s kvalifikovaným elektrikářem.
- Ensure the timer's electrical ratings match your application.
Schéma zapojení:
Refer to the diagram below for typical wiring connections. The EC200WK requires a neutral wire.
Obrázek: Boční view of the Intermatic EC200WK timer showing the wiring diagram and connections for hot, load, ground, and neutral wires.
The timer features clearly labeled wires for easy connection: Black (Hot), Red (Load), Green (Ground), and White (Neutral).
Kroky instalace:
- Turn off power to the switch at the circuit breaker.
- Odstraňte stávající nástěnnou desku a vypínač.
- Carefully disconnect the wires from the old switch, noting their connections.
- Connect the wires from the wall box to the EC200WK timer according to the wiring diagram.
- Secure the timer into the wall box.
- Nainstalujte novou nástěnnou desku.
- Obnovte napájení na jističi.
Návod k obsluze
The Intermatic EC200WK timer is designed for simple, single-button operation. It offers preset countdown times and a "HOLD" function for continuous operation.
Selecting a Countdown Time:
Press and release the large button at the bottom of the timer. Each press will cycle through the available countdown times, indicated by the illuminated LED next to the corresponding time setting (5 MIN, 10 MIN, 15 MIN, 30 MIN). The connected load will remain on for the selected duration and then automatically turn off.
Obrázek: Podrobný view of the EC200WK timer's faceplate, highlighting the LED indicators for each time preset and the main button.
Using the "HOLD" Feature:
To keep the connected load on continuously, press the button until the "HOLD" LED illuminates. The load will remain on until you manually turn it off by pressing the button again to cycle to an "off" state or a new countdown time.
Automatické vypnutí:
When a countdown time is selected, the timer will automatically turn off the connected device once the set time has elapsed. This feature helps conserve energy and provides convenience.
Image: The EC200WK timer mounted on a bathroom wall, illustrating its use for automatic shut-off of devices like exhaust fans or lights.
Údržba
The Intermatic EC200WK Electronic Countdown Timer requires minimal maintenance. To ensure optimal performance and longevity:
- Keep the timer and wall plate clean by wiping with a soft, dry cloth. Avoid abrasive cleaners or solvents.
- Nepokoušejte se jednotku otevírat ani opravovat. Veškerý servis svěřte kvalifikovanému personálu.
- Ensure the timer is not exposed to excessive moisture or extreme temperatures.
Odstraňování problémů
If you experience issues with your Intermatic EC200WK timer, refer to the following common troubleshooting steps:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Časovač se nezapíná/nevypíná. | Žádné napájení jednotky; nesprávné zapojení; vypnutý jistič. | Check circuit breaker. Verify wiring connections are secure and correct (Hot, Load, Neutral, Ground). |
| LED indicators are not lighting up. | No power; unit malfunction. | Ensure power is supplied to the circuit. If power is present and LEDs remain off, the unit may require replacement. |
| Load remains on indefinitely (not counting down). | "HOLD" feature is active. | Press the button to cycle through the settings until a specific countdown time is selected, or to turn the load off. |
| Timer makes buzzing noise. | Incompatible load type; internal component issue. | Ensure the connected load is compatible with the timer's specifications. If buzzing persists, discontinue use and contact support. |
If the problem persists after attempting these solutions, please contact Intermatic customer support.
Specifikace
| Atribut | Detail |
|---|---|
| Číslo modelu | EC200WK |
| Barva | Bílý |
| Rozměry produktu | 2.01"H x 4.92"Š x 6.61"V |
| Hmotnost položky | 0.36 libry (5.8 unce) |
| Počet nastavení | 4 (5, 10, 15, 30 minutes) plus HOLD |
| Typ montáže | Držák na zeď |
| Osvědčení | Seznam UL |
| Kompatibilita | Resistive, Tungsten, Inductive Ballast, Electronic Ballast loads (CFL, LED, Fluorescent compatible) |
| Je vyžadován neutrální vodič | Ano |
Oficiální videa produktů
Intermatic EC200WK Electronic Countdown Timer Overview
Video: Toto video poskytuje komplexní přehledview of the Intermatic EC200WK Electronic Countdown Timer, highlighting its key features such as single-button operation, silent performance, and compatibility with various lighting types. It also demonstrates how the timer replaces single-pole switches and the requirement for a neutral connection.
Záruka a podpora
Intermatic products are designed for durability and reliability. This product comes with a manufacturer's warranty. For specific warranty details, please refer to the documentation included with your product or visit the official Intermatic webmísto.
For technical assistance, troubleshooting, or warranty claims, please contact Intermatic customer support:
- Online podpora: Navštivte Obchod Intermatic na Amazonu nebo jejich úředník webmísto.
- Kontaktní údaje: Viz kontaktní údaje uvedené na obalu produktu.
