Zavedení
The Defiant Mini-Button Dusk-To-Dawn Light Controller is designed to automate your outdoor lighting system. This photo control unit senses ambient light levels, automatically turning connected lights ON at dusk and OFF at dawn. It is compatible with a wide range of lighting systems, including Incandescent, CFL, LED, Sodium Vapor, and Metal Halide outdoor lighting.
Bezpečnostní informace
- Always disconnect power at the fuse box or circuit breaker before installing or servicing this device to prevent electrical shock.
- Pokud nejste obeznámeni s elektrickým zapojením, měl by instalaci provést kvalifikovaný elektrikář.
- Ujistěte se, že všechny kabelové spoje jsou bezpečné a řádně izolované.
- This device is rated for outdoor use. Ensure all connections are weatherproof.
- Do not exceed the maximum electrical ratings specified for this product.
Obsah balení
- One (1) Defiant Mini-Button Dusk-To-Dawn Light Controller
Image: The Defiant Mini-Button Photo Control unit, showing its compact size and pre-attached wiring for installation.
Specifikace
| Číslo modelu | 1000 012 076 |
| Elektrické hodnocení | 120 V stř., 50/60 Hz |
| Maximum Load (Tungsten) | 500W |
| Maximum Load (Ballast) | 300 VA |
| Průměr montážního otvoru | 7/16 palce |
| Compatible Light Types | Incandescent, CFL, LED, Sodium Vapor, Metal Halide |
| Rozměry produktu | 3.81 x 1.27 x 3.81 cm; 28.35 g |
| Prostředí použití | Venkovní |
Pokyny k instalaci
Follow these steps carefully to install your Defiant Mini-Button Photo Control:
- Odpojit napájení: Before beginning any wiring, ensure the power supply to the circuit is disconnected at the fuse box or circuit breaker.
- Kabelová připojení:
- Připojte černý vodič from the photo control to the black power line wire (hot line).
- Připojte červený drát from the photo control to the black wire of the light fixture.
- Připojit all white wires (from the light fixture, the photo control, and the white power line wire) together as the neutral connection.
- Montáž ovládání: The body of the control must be securely located in a 7/16 inch diameter hole within the fixture enclosure. Insert the nipple through the hole and tighten the nut sufficiently to create a weatherproof seal. Ensure the sensor lens is exposed to ambient light and not obstructed.
- Obnovit napájení: Once all connections are secure and the control is mounted, turn on the power supply at the fuse box or circuit breaker. The control may have an initial delay of up to 2 minutes before activating.
Image: This diagram illustrates the correct wiring connections for the Defiant Mini-Button Photo Control. The black wire from the control connects to the incoming black (hot) power line. The red wire from the control connects to the black wire of the light fixture. All white wires (from the control, fixture, and incoming power line) are connected together as the neutral connection.
Návod k obsluze
The Defiant Mini-Button Photo Control operates automatically once installed and powered. It requires no manual intervention for daily operation.
- Automatická aktivace: The photo control will automatically turn your connected lights ON when ambient light levels drop to a certain threshold (dusk).
- Automatická deaktivace: The photo control will automatically turn your connected lights OFF when ambient light levels rise above a certain threshold (dawn).
- Počáteční zpoždění: Upon initial power-up or after a power interruption, the control may have a delay of up to 2 minutes before it begins normal operation. This is a normal function to prevent false triggering.
Údržba
To ensure optimal performance and longevity of your photo control, follow these simple maintenance guidelines:
- Udržujte senzor čistý: Periodically inspect the photo sensor lens and gently clean it with a soft, damp cloth to remove any accumulated dirt, dust, or debris. A dirty sensor can impair its ability to detect light accurately.
- Vyhněte se překážkám: Ensure that no objects, such as leaves, branches, or new installations, are blocking the sensor's view of ambient light.
- Nemalovat: Never paint over the photo sensor lens, as this will prevent it from functioning correctly.
Odstraňování problémů
If you experience issues with your Defiant Mini-Button Photo Control, refer to the following common problems and solutions:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Světla zůstávají během dne ZAPNUTA. | Snímač je zakrytý nebo ucpaný. Sensor is exposed to artificial light at night. Vadný snímač. | Clear any obstructions from the sensor lens. Relocate the sensor or shield it from artificial light sources (e.g., streetlights, other fixtures). If problem persists, replace the unit. |
| Lights do not turn ON at night. | Jednotka není napájena. Nesprávné zapojení. Sensor is exposed to too much ambient light. Vadná žárovka nebo svítidlo. Vadný snímač. | Check circuit breaker/fuse. Ensure power is restored. Zkontrolujte zapojení kabeláže dle instalačních pokynů. Ensure sensor is not receiving light from other sources. Test the light bulb and fixture with a known working power source. If problem persists, replace the unit. |
| Lights flicker or cycle ON/OFF rapidly. | Nestabilní napájení. Rušení senzorů. Vadná žárovka. | Poraďte se s elektrikářem, aby zkontroloval napájení. Ensure sensor is not near reflective surfaces or intermittent light sources. Vyměňte žárovku. |
Záruka a podpora
This Defiant product is manufactured with quality and durability in mind. While specific warranty terms are not detailed here, Defiant products typically come with a limited warranty against defects in materials and workmanship.
For assistance, technical support, or warranty inquiries, please contact Home Depot customer service:
- Telefon: 1-866-308-3976
- Webmísto: HOMEDEPOT.COM
Distribuuje: Home Depot
Země původu: Čína
UPC: 0081077003415
