BLACK+DECKER BC25BD 25 Amp 12V Bench Battery Charger/Maintainer Instruction Manual

Zavedení

The BLACK+DECKER BC25BD is a fully automatic 25 Amp 12V bench battery charger and maintainer designed for optimal battery performance and longevity. This unit is suitable for charging and maintaining AGM, GEL, or WET automotive and marine 12V batteries. It features advanced 3-stage charging, a battery reconditioner, an alternator check function, and a 75 Amp engine start capability to get your vehicle back on the road quickly.

Before operating this device, please read this instruction manual thoroughly to ensure safe and effective use. Refer to the troubleshooting steps as needed for any operational issues.

Bezpečnostní informace

VAROVÁNÍ: Cancer and reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Always observe proper safety precautions when working with batteries and electrical equipment. Ensure adequate ventilation and wear appropriate personal protective equipment, including eye protection.

The charger is equipped with reverse polarity protection, which prevents damage if the battery clamps are connected incorrectly. However, always double-check connections before initiating any charging or starting process.

Nastavení

1. Připravte si baterii: Ensure the battery terminals are clean and free of corrosion. If charging a wet cell battery, check the electrolyte levels and top up with distilled water if necessary.
2. Umístění nabíječky: Place the charger on a stable, flat surface away from flammable materials and sources of heat. Ensure the charger is not directly above the battery during charging.
3. Připojte baterii Clamps:
   

   Image: The BLACK+DECKER BC25BD charger connected to a car battery. The red positive clamp is attached to the positive battery terminal, and the black negative clamp is attached to the negative battery terminal.

   • Připojte ČERVENÁ (+) pozitivní třamp ke kladnému pólu baterie.
   • Připojte ČERNÁ (-) negativní třamp k zápornému pólu baterie.

   Ensure a secure connection. The LCD screen will display the battery status once connected.

4. Připojení k napájení: Zapojte napájecí kabel nabíječky do standardní elektrické zásuvky s napětím 120 V.

Návod k obsluze

Automatické nabíjení

The BC25BD features fully automatic high-frequency 3-stage charging. Once connected and powered on, the charger automatically detects the battery type (AGM, GEL, or WET Lead Acid) and size, then initiates the appropriate charging cycle:

• Rychlé nabíjení: Delivers a high current to quickly bring the battery to a significant charge level.
• Top-Off Charge: Reduces the current as the battery approaches full capacity to prevent overcharging.
• Trickle Charge (Float Mode): Maintains the battery at full charge without overcharging, ideal for long-term storage.

The digital LCD screen displays the charging status and battery status with easy-to-understand icons.

Battery Reconditioner

The battery reconditioner function automatically activates if the charger determines the battery is not in optimal condition to accept a charge. This feature works to reverse sulfate build-up on battery plates, improving charging capability and extending battery life.

Kontrola alternátoru

This function evaluates the battery voltage under load to indicate if the vehicle's alternator is maintaining the battery level correctly. Consult your vehicle's service manual for specific alternator test procedures.

75 Amp Startování motoru

For vehicles that won't start due to a discharged battery, the 75 Amp engine start feature can provide a quick boost. This function helps start your vehicle in approximately 90 seconds. Follow these steps:

1. Ensure the charger is properly connected to the battery and plugged into an AC outlet.
2. Select the Engine Start function on the charger.
3. Wait for the countdown (approximately 90 seconds) to complete.
4. Attempt to start the vehicle. If the vehicle does not start, wait a few minutes before attempting again.

Image: The BLACK+DECKER BC25BD charger is shown connected to a car battery within an engine bay, illustrating its use for the engine start function.

Vlastnosti produktu

The BLACK+DECKER BC25BD charger is engineered with several features to simplify battery maintenance and ensure safety:

• 25 Amp Bench Battery Charger: Capable of charging and maintaining 12V AGM, GEL, or WET Lead Acid batteries.
  

  Ikona: 25 Amp Nabíječka baterií.
• Plně automatický 3-Stage Nabíjení: Transitions automatically between fast charge, top-off, and trickle charge for optimal battery health.
  

  Icon: Automatic Smart Charge.

• Rekondicionér baterií: Automatically engages to reverse sulfation and improve battery capacity.
  

  Icon: Battery Recondition.

• Ochrana proti přepólování: Zabraňuje poškození nabíječky a baterie v případěamps jsou nesprávně připojeny.
• Digitální LCD obrazovka: Displays charging status and battery status using clear icons.
  

  Icon: LCD Screen with charge indicator.
• Kontrola alternátoru: Helps diagnose if the vehicle's alternator is functioning correctly.
  

  Icon: Alternator Check.

• 75 Amp Startování motoru: Provides a powerful boost to start vehicles with discharged batteries.
  

  Ikona: 75 Amp Start motoru.

• Vestavěný kabel a Clamp Skladování: For convenient use and storage.
  

  Icon: On-Board Cord Storage.

Konec produktuview videa

Údržba

Regular maintenance ensures the longevity and optimal performance of your battery charger. Always disconnect the charger from the AC outlet and the battery before performing any maintenance.

• Čištění: Otřete nabíječku casing and cables with a soft, dry cloth. Do not use solvents or abrasive cleaners.
• Kontrola kabelů: Periodically inspect the battery cables and clampZkontrolujte, zda nevykazují známky poškození, roztřepení nebo koroze. V případě potřeby je vyměňte.
• Skladování: Store the charger in a cool, dry place. Utilize the built-in cord and clamp storage to keep cables tidy and prevent damage.

Odstraňování problémů

If the charger is not operating as expected, refer to the following general troubleshooting tips:

• Bez napájení/displeje: Ensure the charger is securely plugged into a live AC outlet. Check the power outlet with another device.
• Nabíjení se nezačíná: Ověřte, zda je baterie vybitáamps are correctly and securely connected to the battery terminals (red to positive, black to negative). The reverse polarity protection will prevent charging if connections are incorrect.
• Battery Reconditioner Active: If the reconditioner function is active for an extended period, it indicates the battery may be heavily sulfated. Allow the cycle to complete. If the battery still does not hold a charge, it may need replacement.
• Engine Start Failure: Ensure the battery has sufficient residual charge for the engine start function to work effectively. If the battery is completely dead, it may require a longer charge before attempting engine start.
• Kódy chyb: Consult the specific error codes displayed on the LCD screen with the detailed user manual provided with the product for precise solutions.

Specifikace

Záruka a podpora

The BLACK+DECKER BC25BD Fully Automatic 25 Amp 12V Bench Battery Charger/Maintainer includes a limited 1-year manufacturer warranty. For warranty claims or technical support, please contact Baccus Global LLC, the manufacturer, or refer to the contact information provided in the product packaging.