Návod k obsluze tlačítka Geberit Duravit Impuls280 007460 s dvojitým splachováním

1. Úvod

This instruction manual provides comprehensive guidance for the installation, operation, and maintenance of the Geberit Duravit Impuls280 007460 Dual Flush Push Button. Please read this manual thoroughly before proceeding with installation or use to ensure proper function and longevity of the product.

2. Konec produktuview

The Geberit Duravit Impuls280 007460 is a high-quality dual flush push button designed for use with compatible toilet cisterns. It features a durable stainless steel metal construction and provides two flushing options: a full flush for solid waste and a partial flush for liquid waste, promoting water conservation.

Figure 1: Geberit Duravit Impuls280 007460 Dual Flush Push Button. This image displays the chrome-finished Geberit Duravit Impuls280 007460 Dual Flush Push Button. It features a circular design with two distinct push areas for full and partial flush options, designed for integration into a toilet cistern lid.

3. Nastavení a instalace

Installation of the dual flush push button requires basic plumbing knowledge. If you are unsure, it is recommended to consult a qualified plumber.

1. Vypněte přívod vody: Locate the main water shut-off valve for your toilet and turn it off. Flush the toilet to empty the cistern.
2. Sejměte víko splachovací nádržky: Carefully lift and remove the toilet cistern lid.
3. Remove Old Push Button (if applicable): Disconnect any linkages or securing nuts from the underside of the old push button. Remove it from the cistern lid.
4. Install New Push Button: Insert the new Geberit Duravit Impuls280 007460 push button into the designated opening on the cistern lid. Ensure it sits flush and is oriented correctly.
5. Secure Push Button: From the underside of the cistern lid, secure the push button using the provided securing nut or mechanism. Do not overtighten.
6. Propojení vazeb: Attach the push button's activation rods or cables to the flush valve mechanism inside the cistern. Adjust the length of the rods/cables to ensure proper activation of both full and partial flush functions.
7. Replace Cistern Lid: Carefully place the cistern lid back onto the toilet.
8. Obnovení zásobování vodou: Turn the main water shut-off valve back on. Allow the cistern to refill.
9. Test funkčnosti: Test both the full flush and partial flush functions to ensure they operate smoothly and effectively. Adjust linkages if necessary.

Note: Specific installation steps may vary slightly depending on your toilet cistern model. Refer to your toilet's manual for detailed instructions on flush valve connection.

4. Návod k obsluze

The Geberit Duravit Impuls280 007460 Dual Flush Push Button offers two distinct flushing options:

• Plné spláchnutí: Press the larger section of the push button for a complete flush, typically used for solid waste.
• Částečné spláchnutí: Press the smaller section of the push button for a reduced water flush, typically used for liquid waste, conserving water.

Ensure the button is fully depressed for the desired flush to activate the flush valve correctly.

5. Údržba

Regular cleaning and inspection will help maintain the appearance and functionality of your push button.

• Čištění: Clean the chrome surface with a soft, damp cloth and mild, non-abrasive cleaner. Avoid harsh chemicals, abrasive pads, or acidic cleaners, as these can damage the finish.
• Inspekce: Periodically check the push button for any signs of wear or damage. Ensure the buttons move freely and return to their original position after being pressed.
• Vnitřní mechanismus: If the flush mechanism inside the cistern requires attention, refer to your toilet's specific maintenance instructions. The push button itself generally requires minimal internal maintenance.

6. Řešení problémů

If you encounter issues with your dual flush push button, consider the following common solutions:

• Button Sticks or Does Not Return:
  • Ensure the button is clean and free of debris.
  • Check if the securing nut is overtightened, causing friction. Loosen slightly if necessary.
  • Verify that the activation rods/cables are not bent or obstructed.
• Flush Not Activating or Weak Flush:
  • Confirm that the water supply to the cistern is fully open.
  • Check the connection between the push button rods/cables and the flush valve. They may need adjustment to ensure proper engagement.
  • Inspect the flush valve itself for any obstructions or malfunctions.
• Nepřetržitě tekoucí voda:
  • This is usually an issue with the flush valve or fill valve, not the push button directly. Ensure the flush valve seal is clean and properly seated.
  • Verify that the push button is not stuck in a partially depressed position.

For persistent issues, it is advisable to contact a qualified plumber or the manufacturer's support.

7. Specifikace

8. Záruka a podpora

For information regarding product warranty, please refer to the documentation provided with your purchase or visit the official Geberit or Duravit website. For technical support or assistance with specific issues not covered in this manual, please contact the manufacturer's customer service department.

You can typically find contact information on the product packaging or the official brand webstránky:

• Oficiální informace o Geberitu Webmísto
• Duravit Official Webmísto