1. Konec produktuview
The HENDI 271346 Roasting Thermometer/Timer is a versatile kitchen tool designed to accurately monitor temperatures during cooking, especially for roasting. It features a durable stainless steel probe suitable for oven use and includes a timer function for precise cooking control.
Image: The HENDI 271346 digital thermometer and timer unit with its attached stainless steel probe, ready for use.
Klíčové vlastnosti:
- Funkce časovače: Allows for precise timing of cooking processes.
- Široký teplotní rozsah: Měří od 0 °C do 300 °C (32 °F až 572 °F).
- Volitelné jednotky: Snadné přepínání mezi stupni Celsia (°C) a Fahrenheita (°F).
- Accurate Graduation: Provides readings with 1°C (or 0.1°C resolution as per specifications) precision.
- Režim zámku: For continuous temperature monitoring.
- Min/Max Temperature Function: Records the lowest and highest temperatures measured.
- Programmable Temperature Alarm: Alerts you when the target temperature is reached.
- Odolná sonda: 150 mm stainless steel probe designed to remain in the oven (heat resistant).
- Provoz na baterie: Convenient and portable, battery included.
2. Bezpečnostní informace
Please read all safety instructions carefully before using the device. Improper use can lead to damage or injury.
- Manipulace se sondou: The stainless steel probe is sharp. Handle with care to avoid injury.
- Hlavní jednotka: The main thermometer unit is NOT waterproof. Do not immerse it in water or other liquids. Clean with a damp pouze plátno.
- Probe Heat Resistance: The probe and its cable are designed to withstand high oven temperatures (up to 250°C). However, avoid direct flame contact.
- Děti: Udržujte zařízení mimo dosah dětí.
- Bezpečnost baterie: Ensure correct battery polarity. Remove batteries if the device will not be used for an extended period. Dispose of batteries responsibly.
- Zamýšlené použití: This device is intended for food temperature measurement only. Do not use for other purposes.
3. Obsah balení
Po otevření balení se ujistěte, že jsou přítomny všechny následující položky:
- HENDI 271346 Thermometer/Timer Unit
- 150 mm Stainless Steel Temperature Probe
- Baterie (předinstalovaná nebo dodávaná samostatně)
Image: All components of the HENDI 271346 thermometer, including the main unit, probe, and a probe clip/holder.
4. Nastavení
- Instalace baterie:
Locate the battery compartment on the back of the main unit. Open the cover, insert the included battery (typically AAA) ensuring correct polarity (+/-), and close the compartment securely.
- Připojení sondy:
Insert the probe's jack firmly into the designated port on the side of the main unit. Ensure a secure connection for accurate readings.
- Počáteční zapnutí:
Press the power button (if available, otherwise it may power on automatically upon probe connection or battery insertion). The display should light up, showing the current ambient temperature.
5. Návod k obsluze
5.1. Měření teploty
- Umístění sondy: Insert the stainless steel probe into the thickest part of the food, avoiding bones or gristle, for the most accurate temperature reading.
- Sledování teploty: The current temperature will be displayed on the main unit's screen.
- Using in Oven: The probe and its cable are oven-safe. Ensure the main unit remains outside the oven, away from direct heat.
Image: The HENDI 271346 thermometer in use, with the probe inserted into a piece of meat to monitor its internal temperature.
5.2. Setting Temperature Units (°C/°F)
Press the "°C/°F S/S" button to toggle between Celsius and Fahrenheit temperature displays.
5.3. Setting a Target Temperature (Alarm)
- Press the "SET TEMP" button (or similar, based on common thermometer interfaces, assuming it's the same as the °C/°F button or a dedicated one if present).
- Use the "MIN" and "SEC" buttons (or up/down arrows if present) to adjust the desired target temperature.
- Once the target temperature is set, the alarm will sound when the probe reaches this temperature.
5.4. Použití funkce časovače
The device also functions as a timer.
- Press the "MODE" button (if available, or a long press on "S/S" might switch modes) to enter timer mode.
- Use the "MIN" and "SEC" buttons to set the desired countdown time.
- Press the "S/S" button to start or stop the timer. An alarm will sound when the timer reaches zero.
5.5. Min/Max Temperature Function
Tato funkce vám to umožňuje view the minimum and maximum temperatures recorded since the device was powered on or reset.
- Press a dedicated "MIN/MAX" button (if available) or cycle through modes to view tyto hodnoty.
- To reset the min/max values, consult the device's specific button combination (often a long press on the min/max button or power cycle).
5.6. Režim uzamčení
The lock mode is designed to monitor temperature continuously without accidental changes to settings.
- Activate lock mode by pressing the designated "LOCK" button (if available) or a specific button combination.
- In lock mode, the display will continue to show the current temperature, but buttons will be unresponsive until unlocked.
6. Údržba
Proper maintenance ensures the longevity and accuracy of your HENDI thermometer.
- Čištění sondy: After each use, clean the stainless steel probe thoroughly with warm soapy water. Rinse and dry completely. The probe can be wiped with a damp tkanina.
- Čištění hlavní jednotky: Otřete hlavní jednotku měkkým, damp cloth. Do NOT immerse the main unit in water or place it under running water. Avoid abrasive cleaners or solvents.
- Skladování: Store the thermometer and probe in a clean, dry place when not in use. Keep the probe tip protected to prevent damage.
- Výměna baterie: When the display dims or the device stops functioning, replace the battery. Follow the battery installation steps in Section 4.1.
7. Řešení problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Displej je prázdný nebo tmavý. | Slabá nebo vybitá baterie. Nesprávná instalace baterie. | Replace the battery. Ensure battery is inserted with correct polarity. |
| Inaccurate temperature readings (e.g., showing +50°C initially). | Probe not fully inserted. Probe or cable damage. Environmental interference. | Ensure the probe jack is fully seated. Check probe and cable for visible damage. Try testing in a known temperature environment (e.g., ice water for 0°C). If the issue persists, the probe or unit may be faulty. |
| Alarm se nespustí. | Alarm volume too low or muted. Target temperature not set correctly. | Check if there's a volume setting (unlikely for this type of device, but check manual if available). Re-set the target temperature. |
| Tlačítka nereagují. | Device is in Lock Mode. Battery issue. | Deactivate Lock Mode. Replace battery. |
8. Specifikace
| Funkce | Detail |
|---|---|
| Číslo modelu | 271346 |
| Značka | HENDI |
| Teplotní rozsah | 0 °C až 300 °C (32 °F až 572 °F) |
| Rozlišení teploty | 0.1 °C |
| Délka sondy | 150 mm |
| Materiál sondy | Nerez |
| Materiál hlavní jednotky | Nerezová ocel (vnější strana) |
| Rozměry (D x Š x V) | 2.6 x 11.9 x 23.1 cm (approx. 65x70x17 mm for the unit itself) |
| Hmotnost | 118 gramů |
| Zdroj napájení | Battery Powered (Battery included) |
| Heat Resistance (Probe) | Up to 250°C (Oven-safe) |
| Země původu | Čína |
9. Záruka a podpora
For warranty information, please refer to the documentation included with your purchase or visit the official HENDI website. HENDI provides high-quality products and exceptional service.
If you encounter any issues not covered in this manual or require further assistance, please contact HENDI customer support through their official channels. Always provide your product model number (271346) when seeking support.
You can find more information about HENDI products and support at: www.hendi.eu
