Transformers Construct-Bots Dinofire Grimlock and Optimus Prime Set (Model A6146) Instruction Manual

1. Úvod

Welcome to the world of Transformers Construct-Bots! This manual provides comprehensive instructions for assembling and operating your Dinofire Grimlock and Optimus Prime figures. These figures can be built in multiple modes and combined for enhanced play. Please read all instructions carefully before beginning assembly.

2. Bezpečnostní informace

• Doporučený věk: Tento produkt se doporučuje pro věk 7 let a starší.
• Malé díly: The set contains small parts which may pose a choking hazard for children under 3 years of age. Adult supervision is advised during assembly and play.
• Bezpečnost baterie: Grimlock's Firebreath launcher requires 2 AA batteries (included). Ensure batteries are inserted with correct polarity (+/-). Do not mix old and new batteries, or alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries. Remove batteries if the product is not used for an extended period.

3. Obsah balení

Your Transformers Construct-Bots Dinofire Grimlock and Optimus Prime Set includes the following components:

• 79 building pieces for Grimlock and Optimus Prime
• 9 missiles
• 2 rapid-fire cannons
• 2 AA batteries (pre-installed for Grimlock's Firebreath launcher)

4. Montážní návod

This set allows you to build both Optimus Prime and Dinofire Grimlock. Follow the steps below for assembly.

4.1. Assembling Optimus Prime (Robot Mode)

1. Identify all pieces designated for Optimus Prime. These typically include blue, red, and grey components.
2. Begin by connecting the torso and waist sections.
3. Attach the leg components to the waist, ensuring secure connections at the hip joints.
4. Assemble the arm components and attach them to the shoulder joints on the torso.
5. Finally, attach the head piece to complete Optimus Prime in robot mode.

4.2. Assembling Dinofire Grimlock (Robot or Dino Mode)

Grimlock can be assembled in two primary modes: robot or dinosaur. The light-up Firebreath launcher is integrated into the head assembly.

1. Separate Grimlock's pieces, which are predominantly orange, black, and grey.
2. For Dino Mode:
   • Assemble the main body and tail sections.
   • Attach the four leg assemblies, ensuring they are oriented for dinosaur posture.
   • Connect the head piece, which contains the light-up Firebreath launcher. Ensure the battery compartment is closed and secured.
   • Attach any additional armor or weapon pieces to complete the dinosaur form.
3. For Robot Mode:
   • Assemble the torso and waist, orienting them for a bipedal robot.
   • Attach the two leg assemblies, ensuring they are positioned for robot stance.
   • Connect the arm assemblies, which may include weapon attachments.
   • Attach the head piece, which contains the light-up Firebreath launcher, to the neck joint.

5. Návod k obsluze

5.1. Transforming Grimlock

To transform Grimlock between robot and dinosaur modes, carefully detach and reattach the limbs and body sections according to the desired configuration. Refer to the visual guides on the product packaging or included diagrams for specific transformation steps.

5.2. Using the Dinofire Grimlock Firebreath Launcher

1. Ensure 2 AA batteries are correctly installed in Grimlock's head unit.
2. Locate the activation button, typically on the side or top of Grimlock's head.
3. Press the button to activate the light-up Firebreath effect.

5.3. Combining Figures

Optimus Prime can ride Dinofire Grimlock when Grimlock is in dinosaur mode. Position Optimus Prime (in robot mode) onto Grimlock's back, utilizing any designated pegs or slots for a secure fit.

6. Údržba

• Čištění: Wipe figures with a dry, soft cloth. Avoid using harsh chemicals or abrasive cleaners.
• Skladování: Store the figures and all components in a cool, dry place away from direct sunlight to prevent material degradation.
• Výměna baterie: If the light-up feature dims or stops working, replace the 2 AA batteries.

7. Řešení problémů

• Pieces Detach Easily: Ensure all connections are firmly pressed into place during assembly. While designed for reassembly, frequent forceful impacts may loosen connections. Reattach any detached pieces carefully.
• Light-up Feature Not Working: Check that the 2 AA batteries are correctly inserted with the proper polarity. If issues persist, replace with fresh batteries.
• Obtížnost transformace: Refer to the visual instructions provided with the product for detailed transformation sequences. Ensure all joints are aligned correctly before attempting to connect parts.

8. Specifikace

9. Záruka a podpora

For information regarding product warranty, replacement parts, or customer support, please refer to the contact details provided on the product packaging or visit the official Hasbro webmísto. Uschovejte si doklad o koupi pro případ záručních reklamací.