1. Úvod
The Einhell GC-DP 1340 G dirty water pump is a powerful and robust tool designed for demanding drainage tasks. It is ideal for pumping heavily contaminated water from various sources such as ponds, wells, construction sites, and flooded basements. With a high flow rate and durable construction, this pump ensures efficient and reliable performance.
Figure 1: Einhell GC-DP 1340 G Dirty Water Pump and included rope.
2. Bezpečnostní pokyny
Vždy dodržujte následující bezpečnostní pokyny, abyste předešli zranění a poškození zařízení:
- Read the entire manual before operating the pump.
- Ensure the power supply matches the pump's specifications (230 Volts).
- Neprovozujte čerpadlo s poškozeným napájecím kabelem nebo zástrčkou.
- Never lift or carry the pump by its power cord. Use the transport handle or the provided rope.
- Udržujte děti a neoprávněné osoby mimo provozní prostor.
- Nečerpejte hořlavé, výbušné nebo korozivní kapaliny.
- Ensure adequate ventilation when operating in enclosed spaces.
- Disconnect the pump from the power supply before any maintenance or cleaning.
3. Komponenty produktu
Familiarize yourself with the main components of your Einhell dirty water pump:
4. Nastavení
Follow these steps for proper setup of your dirty water pump:
- Připojte hadici: Securely connect a 2-inch (50.8mm) discharge hose to the pump's G2 connection. Ensure the connection is tight to prevent leaks.
- Umístění: Place the pump on a stable, level surface in the area to be drained. Ensure the pump is fully submerged in the water for optimal operation.
- Operační prostor: Allow for sufficient operating space around the pump, with a minimum of 50 x 50 cm, and a diameter of 27 cm for the pump itself.
- Nastavení plovákového spínače: Adjust the float switch cable length to control the desired ON/OFF water levels. A shorter cable means the pump will switch on and off within a smaller water level range.
- Připojení napájení: Plug the pump into a grounded electrical outlet that matches the pump's voltage požadavky.
Figure 2: Recommended minimum operating space for the pump.
5. Návod k obsluze
The Einhell GC-DP 1340 G pump can operate in continuous or automatic mode:
5.1. Automatic Operation (Float Switch Controlled)
In automatic mode, the pump starts and stops based on the water level, controlled by the float switch. When the water level rises and lifts the float switch, the pump will activate. When the water level drops and the float switch lowers, the pump will deactivate.
Figure 3: Adjustable float switch for automatic operation.
5.2. Nepřetržitý provoz
For continuous operation, secure the float switch in an upright position (e.g., by attaching it to the pump handle) so that it remains in the "ON" position regardless of the water level. This will keep the pump running continuously until manually unplugged or the water source is depleted.
The pump is designed to handle dirty water with particles up to 40 mm in size.
Figure 4: Maximum particle size handled by the pump.
6. Údržba
Pravidelná údržba zajišťuje dlouhou životnost a optimální výkon vašeho čerpadla:
- Čištění: After each use, especially when pumping heavily contaminated water, rinse the pump thoroughly with clean water to remove debris and prevent clogging.
- Kontrola oběžného kola: Periodically check the impeller for any blockages or damage. Clear any debris carefully.
- Double Mechanical Seal: The high-quality double mechanical seal is designed for excellent durability and requires no maintenance.
- Skladování: Store the pump in a dry, frost-free location when not in use for extended periods.
Obrázek 5: Vnitřní view of the pump's impeller.
Figure 6: Illustration of the double mechanical seal for extended lifespan.
7. Řešení problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Čerpadlo se nespustí. | Žádné napájení; Plovákový spínač není aktivován; Přetížení motoru. | Check power connection and circuit breaker; Ensure float switch is in "ON" position or water level is sufficient; Allow motor to cool down, then restart. |
| Pump runs but no water is discharged or flow is low. | Hose kinked or blocked; Impeller clogged; Airlock in pump. | Check and clear hose; Disconnect power and clear impeller; Submerge pump fully, tilt it to release air bubbles, then restart. |
| Čerpadlo se neočekávaně zastaví. | Float switch deactivated (water level too low); Thermal overload protection activated. | Check water level and float switch position; Allow pump to cool down. |
8. Specifikace
| Funkce | Specifikace |
|---|---|
| Model | GC-DP 1340 G |
| Moc | 1300 wattů |
| svtage | 230 voltů |
| Max. Průtok | 23000 litrů za hodinu |
| Max. výška hlavy | 10 metrů |
| Max. Velikost částic | 40 mm |
| Připojení hadice | G2 (2 inches / 50.8mm) |
| Délka kabelu | 10 metrů |
| Hmotnost | 19.3 kg |
| Rozměry (D x Š x V) | 26 x 19.5 x 51.2 cm |
| Materiál | Nerezová ocel, litina |
| Používání | Venkovní |
| Země původu | Čína |
9. Záruka a podpora
Einhell products are manufactured with high-quality materials and undergo strict quality controls. While specific warranty details may vary by region and retailer, a standard return policy of 30 days is typically offered for new products.
For technical support, spare parts, or warranty claims, please contact your authorized Einhell dealer or visit the official Einhell website for customer service information. Please have your model number (GC-DP 1340 G) and purchase details ready when contacting support.
Pro více informací navštivte Einhell Brand Store.
