1. Úvod
This manual provides instructions for the installation, operation, and maintenance of your Lepro 12V LED Strip Light. This flexible, non-waterproof LED tape light is designed for indoor decorative and accent lighting applications. Please read this manual thoroughly before installation and use.
2. Bezpečnostní informace
- Napájecí adaptér: A 12V DC power adapter is není součástí dodávky and must be purchased separately. Ensure the power adapter's output voltage is exactly 12V. Using a higher voltage adapter will damage the LED strip.
- Wattage: Celkový wattage of the LED strip (18W for 16.4ft) must not exceed the maximum wattage rating of your power adapter.
- Teplo: The LED strip operates at an extremely low heat, making it safe to touch.
- Voděodolnost: Tento produkt je nepromokavý and intended for indoor use only. Avoid exposure to water or high humidity.
- Zacházení: The LED strip is flexible but fragile. Handle with care during installation to prevent tearing or damage to the PCB.
- Řezání: Only cut the LED strip at designated cutting marks (every 3 LEDs) to avoid damaging the circuit.
3. Obsah balení
Ověřte, zda jsou v balení přítomny všechny komponenty:
- 1 x Lepro 12V LED Strip Light (16.4 ft)
- Accessories (e.g., connectors, clips - specific accessories may vary, power adapter not included)
Figure 3.1: Package Contents. Note: 12V power supply sold separately.
4. Specifikace
| Funkce | Detail |
|---|---|
| Číslo modelu | 4100057-WW |
| Typ světla | LED Strip Light (SMD 2835) |
| Délka | 16.4 stop (5 metrů) |
| Světlá barva | Teplá bílá |
| Teplota barev | 3000 Kelvinů |
| svtage | DC 12V |
| Wattage | 18 wattů |
| Světelný tok | 1200 XNUMX lumenů |
| Počet LED diod | 300 |
| Stmívatelné | Ne (není stmívatelné) |
| Vnitřní/venkovní použití | Pouze uvnitř |
| Materiál | Silikon |
| Hmotnost položky | 60 gramů (2.12 unce) |
Energetická účinnost
Figure 4.1: Energy Efficiency Label. For more details, visit eprel.ec.europa.eu/qr/1056793.
5. Pokyny k nastavení
5.1 Komponenty nadview
Figure 5.1: LED Strip Light Components. A 12V power supply is required and sold separately.
5.2 kroky instalace
- Připravte povrch: Ensure the surface where the LED strip will be applied is clean, dry, and smooth. Wipe the surface with a clean cloth to remove any dust or debris.
- Změření a řezání (volitelné): If a shorter length is desired, measure the required length. The LED strip can be cut every 3 LEDs along the designated cutting marks. Use sharp scissors for a clean cut. Note: 2-pin 8mm connectors are not included if you cut the strip.
- Aplikujte proužek: Sloupněte ochrannou fólii ze samolepicí pásky na zadní straně LED pásku. Opatrně přitlačte pásek k připravenému povrchu a zajistěte pevný kontakt po celé jeho délce.
- Připojte napájení: Connect the LED strip to a compatible 12V DC power adapter (not included). Ensure the polarity is correct.
Figure 5.2: Installation Process: Clean surface, peel adhesive, and cut at marks.
6. Návod k obsluze
Once properly installed and connected to a 12V DC power adapter, the LED strip light will illuminate when the power adapter is plugged into an electrical outlet. This model is není stmívatelná and does not include a controller. To turn the lights on or off, you must control the power supply directly (e.g., by plugging/unplugging or using a switched outlet).
6.1 Product in Use
Obrázek 6.1: Přample of Warm White LED Strip Light application in a living space.
Figure 6.2: Warm White 3000K LED lighting in a home environment.
6.2 Videoukázka
Video 6.1: Warm White LED Lights Strip for Bedroom. This video demonstrates the appearance of the warm white LED strip lights in a bedroom setting.
7. Údržba
- Čištění: To clean the LED strip, ensure it is unplugged from the power source. Gently wipe the surface with a soft, dry cloth. Do not use abrasive cleaners or immerse the strip in water.
- Zacházení: Avoid bending the strip sharply or applying excessive force, as this can damage the internal circuitry.
- Skladování: If storing the LED strip, roll it loosely on its original reel or a similar circular object to prevent kinks or damage.
8. Řešení problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| LED pásek nesvítí. | Žádné napájení, nesprávná hlasitosttage, faulty power adapter, or damaged strip. | Ensure the 12V power adapter is correctly plugged in and functioning. Verify the power adapter output is 12V DC. Check for visible damage to the strip or connections. |
| Portions of the strip are not lighting up. | Damage to a section of the strip, incorrect cutting, or faulty connection. | Inspect the unlit section for physical damage or improper cuts. Ensure any connectors used are secure. |
| Lepidlo nedrží proužek. | Surface was not clean or smooth, or adhesive has lost its stickiness. | Clean the surface thoroughly before application. For persistent issues, consider using additional adhesive clips or a stronger double-sided tape (e.g., hot glue as a temporary solution, as mentioned in customer reviews, but be aware of potential damage upon removal). |
9. Záruka a podpora
9.1 Informace o záruce
This Lepro LED Strip Light comes with a 2-letá záruka from the date of purchase. This warranty covers manufacturing defects under normal use. It does not cover damage caused by improper installation, misuse, accidents, or unauthorized modifications.
9.2 Zákaznická podpora
For technical assistance, warranty claims, or any questions regarding your Lepro product, please contact Lepro customer support through the retailer's platform or visit the official Lepro webstránky pro kontaktní informace.
