1. Úvod
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your PHILIPS Advance Centium ICN-2S54T35I Fluorescent Ballast. Please read this manual thoroughly before installation and retain it for future reference.
The Centium T5 electronic ballast is designed to operate either 2 or 4 F54T5 or F54T5HP/ES lamps. It delivers optimum performance across a voltage range of 120-277V. This ballast is engineered for use in environments with temperatures up to 90-degrees Celsius (194-degrees Fahrenheit).
2. Bezpečnostní informace
VAROVÁNÍ: Risk of electric shock. Installation and servicing should be performed by qualified personnel only. Disconnect power before installing or servicing.
- Ensure the main power supply is disconnected before any installation, wiring, or maintenance procedures.
- Ověřte, že vstupní objemtage matches the ballast's specified voltage rozsah (120-277V).
- Neprovozujte předřadník s poškozenou kabeláží nebo pokud jeasing je ohroženo.
- Zajistěte správné uzemnění v souladu s místními elektrotechnickými předpisy.
- Do not expose the ballast to moisture or extreme humidity.
- Maintain adequate ventilation around the ballast to prevent overheating.
3. Konec produktuview
The PHILIPS Advance Centium ICN-2S54T35I is a high-performance electronic ballast featuring a programmed start for extended lamp life. It is suitable for a variety of commercial and industrial lighting applications.
Obrázek 1: Přední strana view of the PHILIPS Advance Centium ICN-2S54T35I Fluorescent Ballast. This image shows the compact design and wire leads of the ballast, which is essential for connecting to the power supply and fluorescent lamps.
Klíčové vlastnosti:
- Lamp Kompatibilita: Operates 2 or 4 F54T5/HO or F54T5HP/ES lamps.
- svtage: 120-277V AC, 50/60 Hz.
- Typ začátku: Programmed Start for optimal lamp život.
- Balastní faktor: 1.02.
- Provozní teplota: Designed for environments up to 90°C (194°F).
- Minimální počáteční teplota: -20 °F.
- Celkové harmonické zkreslení (THD): Maximum 10%.
- Účiník: 0.98.
- Hodnocení zvuku: třída A.
- Lamp Operace: Semi-independent or independent.
4. Nastavení a instalace
Installation of this fluorescent ballast requires knowledge of electrical systems. It is strongly recommended that installation be performed by a licensed electrician or qualified personnel.
Kroky instalace:
- Odpojit napájení: Ensure all power to the fixture is turned off at the circuit breaker before beginning installation.
- Remove Old Ballast: Carefully remove the existing ballast, noting the wiring connections.
- Montáž New Ballast: Securely mount the PHILIPS Advance Centium ICN-2S54T35I ballast within the fixture. The ballast dimensions are approximately 1.5 x 1.5 x 15 inches.
- Kabelová připojení: Connect the ballast's wire leads to the fixture's power supply and lamp holders according to the wiring diagram provided with the ballast (not included in this manual, refer to product packaging or manufacturer's website). Ensure all connections are secure and insulated.
- Nainstalovat L.amps: Insert the compatible F54T5/HO or F54T5HP/ES lamps do lamp držáky.
- Obnovit napájení: Once all connections are verified and lamps are installed, restore power to the fixture.
The ballast weighs approximately 0.01 ounces and is constructed primarily from copper components, ensuring durability and efficient operation.
5. Návod k obsluze
The PHILIPS Advance Centium ICN-2S54T35I ballast operates automatically once properly installed and powered. It utilizes a programmed start method, which preheats the lamp cathodes before ignition. This gentle starting process minimizes stress on the lamp electrodes, significantly extending lamp life compared to instant start ballasts.
- Upon applying power, the ballast will initiate the programmed start sequence.
- Lamps will typically ignite within 1-2 seconds after power is supplied.
- The ballast maintains stable lamp provoz a zajišťující konzistentní světelný výkon.
6. Údržba
The PHILIPS Advance Centium ICN-2S54T35I ballast is designed for long-term, maintenance-free operation. However, periodic checks of the lighting fixture are recommended.
- Odpojení napájení: Před prováděním jakékoli údržby vždy odpojte napájení.
- Čištění: Keep the ballast and fixture free from dust and debris to ensure proper heat dissipation. Use a dry, lint-free cloth for cleaning.
- Kontrola elektroinstalace: Periodically inspect wiring for any signs of wear, fraying, or loose connections.
- Lamp Nahrazení: Replace fluorescent lamps with compatible F54T5/HO or F54T5HP/ES types when they reach their end of life or show signs of flickering.
7. Řešení problémů
If your lighting fixture is not operating correctly, refer to the following troubleshooting guide:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Lamps nesvítí | Žádné napájení k upevnění Nesprávné zapojení Vadný lamps Vadný balast | Zkontrolujte jistič a nástěnný vypínač Verify wiring connections (refer to diagram) Vyměňte lamps with known good ones Replace ballast if other solutions fail |
| Lamps flicker or dim | Volné lamp spojení Lamps nearing end of life Nesprávné lamp typ Ballast overheating | Znovu usaďte lamps firmly Vyměňte lamps Ensure F54T5/HO or F54T5HP/ES lamps se používají Ensure adequate ventilation around ballast |
| Ballast hums loudly | Volná montáž Normal operation (slight hum is common) | Utáhněte montážní šrouby If hum is excessive, consult a qualified electrician |
If problems persist after attempting these solutions, contact a qualified electrician or PHILIPS customer support.
8. Specifikace
| Specifikace | Hodnota |
|---|---|
| Číslo dílu | ICN2S54T35I |
| Hmotnost položky | 0.01 unce |
| Rozměry produktu | 1.5 x 1.5 x 15 palce |
| Materiál | Měď |
| Wattage | 2000 watts (Max fixture wattage) |
| Položka Množství v balení | 1 |
| Typ žárovky | Fluorescent (F54T5/HO, F54T5HP/ES) |
| Vstupní objemtage | 120-277V |
| Frekvence | 50/60 Hz |
| Balastní faktor | 1.02 |
| Start Type | Naprogramovaný start |
| Max. Provozní teplota | 90 °C (194 °F) |
| Minimální počáteční teplota | -20 ° F |
| THD | méně než 10 % |
| Účiník | 0.98 |
| Hodnocení zvuku | třída A |
9. Informace o záruce
This PHILIPS Advance Centium ballast is covered by a manufacturer's limited warranty. For specific warranty terms, conditions, and duration, please refer to the documentation included with your product or visit the official PHILIPS lighting webUschovejte si doklad o koupi pro případ reklamace.
10. Zákaznická podpora
For technical assistance, product inquiries, or support, please contact PHILIPS customer service. Refer to the official PHILIPS webNejnovější kontaktní informace naleznete na webu nebo na obalu produktu.
Online zdroje: www.lighting.philips.com