PAC LCGM29

PAC LCGM29 Radio Replacement Interface User Manual

Model: LCGM29

Zavedení

This manual provides instructions for the installation and operation of the PAC LCGM29 Radio Replacement Interface. This interface is designed to retain essential vehicle features when replacing the factory radio in select non-amplified 29-Bit LAN GM vehicles without Bose or OnStar systems.

PAC LCGM29 Radio Replacement Interface module and wiring harness
This image displays the PAC LCGM29 interface module alongside its multi-colored wiring harness, ready for connection to a vehicle's electrical system and an aftermarket radio.

Klíčové vlastnosti

  • Retains all safety warning chimes when the factory radio is replaced.
  • Provides 10-minute Retained Accessory Power (RAP) output.
  • In-package updatable using the PAC-UP.
  • Includes 14-Pin & 16-pin connectors.

Kompatibilita vozidel

The LCGM29 interface is compatible with select General Motors (GM) vehicles equipped with a 29-Bit LAN system and without factory Bose or OnStar audio systems. It is designed for non-amplified vehicle sound systems.

Obsah balení

  • Radio Replacement Interface (LCGM29 module and wiring harness)
Close-up of PAC LCGM29 module label
Detailní záběr view of the PAC LCGM29 module, clearly showing the 'LCGM29' model designation printed on its label.

Pokyny k instalaci

Důležité: Professional installation is recommended. Disconnect the vehicle's negative battery terminal before beginning installation.

  1. Remove the factory radio from the vehicle dashboard.
  2. Connect the PAC LCGM29 wiring harness to the aftermarket radio's wiring harness according to the wiring diagram provided with your aftermarket radio and the LCGM29.
  3. Connect the vehicle-specific connector from the LCGM29 harness to the vehicle's factory radio harness.
  4. Connect the LCGM29 module to its corresponding connector on the harness.
  5. Secure the LCGM29 module and excess wiring in a safe location behind the dashboard, away from moving parts or heat sources.
  6. Reinstall the aftermarket radio into the dashboard.
  7. Znovu připojte záporný pól baterie vozidla.
  8. Test all functions of the aftermarket radio and vehicle chimes.

Návod k obsluze

The PAC LCGM29 operates automatically once installed. It ensures that safety warning chimes function correctly and provides retained accessory power (RAP) for a period after the ignition is turned off, mimicking the factory radio's behavior.

  • Zachovaný výkon příslušenství (RAP): After turning off the ignition, the aftermarket radio will remain powered for approximately 10 minutes or until a vehicle door is opened, whichever occurs first.
  • Safety Chimes: All factory safety warning chimes (e.g., seatbelt, door ajar, low fuel) will be retained and function through the vehicle's audio system.

Údržba

The PAC LCGM29 interface is designed for maintenance-free operation. Ensure all connections are secure during installation. No user-serviceable parts are inside the module.

  • Keep the module free from moisture and extreme temperatures.
  • Do not attempt to open or modify the module, as this will void the warranty.

Odstraňování problémů

ProblémMožná příčinaŘešení
No audio from aftermarket radio.Nesprávné zapojení kabelů.Verify all wiring connections between the LCGM29, aftermarket radio, and vehicle harness.
No safety chimes.LCGM29 module not powered or faulty.Check power connections to the LCGM29. Ensure the module is securely connected to its harness.
Retained Accessory Power (RAP) not functioning.Incorrect wiring or vehicle specific issue.Confirm the accessory wire from the LCGM29 is correctly connected to the aftermarket radio.
Vehicle battery drain.Incorrect wiring or module malfunction.Ensure all connections are correct and secure. If the issue persists, contact technical support.

For further assistance, refer to the PAC webwebu nebo kontaktujte technickou podporu.

Specifikace

  • Značka: PAC
  • Model: LCGM29
  • Materiál: Copper (Core), Polyvinyl Chloride (PVC) (Jacket)
  • Rozměry položky (D x Š x V): 12 x 1 x 5 palce
  • Hmotnost položky: 3.2 unce
  • Typ konektoru: IDC, 3.5mm Jack or 3.5mm Mini-phone
  • Kompatibilita: Select Non-Amplified 29-Bit LAN GM Vehicles (without Bose or OnStar)

Právní vyloučení odpovědnosti

Tento produkt obsahuje chemikálie, o kterých je ve státě Kalifornie známo, že způsobují rakovinu a vrozené vady nebo jiná poškození reprodukce.

Podpora a záruka

For technical support or warranty information, please visit the official PAC webnebo se obraťte na jejich zákaznický servis. Uschovejte si doklad o koupi pro případ reklamace.

Související dokumenty - LCGM29

Předview BCI-GM31: Navigation Unlock & Reverse Camera Interface for GM Vehicles
Installation and operation guide for the PAC BCI-GM31, a GM LAN 29-bit interface for enabling navigation unlock and reverse camera features for passengers.
Předview Návod k instalaci náhradního rozhraní pro rádio GM PAC C2R-GM11b
Komplexní instalační průvodce pro PAC C2R-GM11b, náhradní rozhraní pro autorádio s 11bitovou konfigurací GM GMLAN bez systému OnStar. Toto rozhraní zachovává tovární výstražné zvonkohry, směrová světla a funkci zachování napájení příslušenství (RAP) a zároveň umožňuje instalaci autorádia z dodatečných zdrojů.
Předview PAC GM6A-RST Radio Replacement Interface for GM Vehicles - Installation & Features
Detailed guide for the PAC GM6A-RST Radio Replacement Interface for General Motors vehicles (29-bit V2). Covers installation, wiring, SWC programming, VS41 camera integration, and RadioPRO PC App usage. Retains factory features like BOSE, OnStar, and steering wheel controls.
Předview PAC RP4.2-BM21 Radio Replacement & Steering Wheel Control Interface for BMW Vehicles - Installation Guide
Comprehensive installation guide for the PAC RP4.2-BM21 Radio Replacement and Steering Wheel Control Interface for select CAN-Bus BMW vehicles. Retain factory features, program SWC buttons, and utilize data bus outputs with this advanced interface.
Předview AP4-FD32 Advanced AmpRozhraní lifier pro vybrané vozy Ford
Uživatelská příručka a instalační průvodce pro AP4-FD32 Advanced AmpRozhraní Liferier, určené pro vybrané vozy Ford s prémiovými zvukovými systémy A2B. Zjistěte více o funkcích, zapojení, nastavení, konfiguraci a řešení problémů.
Předview Návod k výměně rádia PAC CH1A-RSX a instalaci rozhraní pro ovládání na volantu
Tato příručka obsahuje pokyny k instalaci rozhraní PAC CH1A-RSX, které umožňuje výměnu autorádia a zachování ovládání na volantu ve vozidlech Chrysler, Dodge a Jeep se specifickými autorádii s datovou sběrnicí. Zahrnuje zapojení, programování a ověření funkcí.