Návod k obsluze náhradního dálkového ovladače Viper 7856V s 2 směrovými LED diodami

1. Úvod

This manual provides detailed instructions for the proper use and maintenance of your Viper 7856V 2-Way LED Replacement Remote Control. This remote is designed to replace or upgrade your existing Viper system remote, offering enhanced functionality and convenience.

Obrázek 1: Přední view of the Viper 7856V 2-Way LED Replacement Remote Control, showing the Viper logo and five control buttons.

2. Klíčové vlastnosti

• 2-Way LED Communication: Provides visual and audible confirmation of commands sent to your vehicle.
• Rozšířený rozsah: Operates effectively up to 1 mile, allowing control from a significant distance.
• 5-Button Transmitter: Dedicated buttons for common functions such as lock, unlock, remote start, and auxiliary controls.
• Kompatibilita: Designed to work with Viper models 3606V, 3806V, 4606V, 4806V, 5606V, and 5806V.
• Dobíjecí design: Features a micro-USB charging port for convenient recharging, eliminating the need for frequent battery replacements.

3. Setup & Programming

The Viper 7856V remote control requires programming to your vehicle's Viper system. This process typically involves placing your vehicle's system into programming mode and then synchronizing the new remote. Refer to your vehicle's Viper system installation manual for specific programming steps, as procedures may vary by system model.

General Programming Tips:

• Ensure your vehicle's battery is fully charged before attempting programming.
• Locate the control button or switch for programming, usually found near the vehicle's fuse box or under the dashboard.
• Some systems may require the "Transmitter programming" feature to be set to "Unlocked" before new devices can be added. Consult your system's advanced settings if programming fails.
• If you encounter difficulties, professional installation or assistance from a certified Viper dealer is recommended.

Obrázek 2: Strana view of the Viper 7856V remote, showing the 'f' button which is often used in programming sequences.

4. Návod k obsluze

The Viper 7856V remote provides intuitive control over your vehicle's security and remote start system. The LED indicators and audible feedback confirm successful command execution.

Funkce tlačítek:

The 2-way communication feature provides visual feedback on the remote's LED indicators, confirming whether your command was received and executed by the vehicle.

5. Údržba

Nabíjení dálkového ovladače:

The Viper 7856V remote control features a built-in rechargeable battery. To charge, connect a standard micro-USB cable to the charging port located on the side of the remote. The LED indicators will show charging status. A full charge typically lasts for an extended period, but regular charging is recommended to ensure optimal performance.

Obrázek 3: Strana view of the Viper 7856V remote, highlighting the micro-USB charging port.

Battery Replacement (if applicable for older models):

While the 7856V is rechargeable, some older Viper remotes may use replaceable coin cell batteries (e.g., CR2016). If you have an older model requiring battery replacement, carefully open the remote casing, replace the old battery with a new one of the same type, and reassemble. Ensure proper polarity. For the 7856V, focus on recharging.

Obecná péče:

• Uchovávejte dálkový ovladač v suchu a mimo dosah extrémních teplot.
• Zabraňte pádu dálkového ovladače nebo jeho vystavování silným nárazům.
• Clean the remote with a soft, dry cloth. Do not use harsh chemicals.

6. Specifikace

Obrázek 4: Zadní view of the Viper 7856V remote control.

7. Řešení problémů

• Dálkové ovládání nereaguje:
  • Ujistěte se, že je baterie dálkového ovladače nabitá.
  • Verify the remote is within the operating range of your vehicle.
  • Check if the vehicle's security system is armed or disarmed as expected.
• Problémy s programováním:
  • Double-check the programming steps in your Viper system's manual.
  • Confirm that the vehicle's system is in programming mode.
  • Ensure the "Transmitter programming" setting is unlocked if applicable.
• Přerušovaný provoz:
  • Environmental factors or radio interference can affect range. Try operating from a different location.
  • Ensure no physical obstructions are blocking the signal path.

If problems persist after attempting these troubleshooting steps, contact customer support or a certified Viper technician.

8. Záruka a podpora

For warranty information, technical assistance, or further support regarding your Viper 7856V 2-Way LED Replacement Remote Control, please contact the seller or visit the official Viper webUschovejte si účtenku jako doklad o koupi pro případ reklamace.