Whirlpool Washing Machine Program Knob

1. Úvod

This instruction manual provides essential information for the proper installation, operation, and maintenance of your Whirlpool Washing Machine Program Knob, Model 481241458306. Please read this manual carefully before attempting any installation or use to ensure safe and correct functionality.

2. Konec produktuview

The Whirlpool Program Knob, Model 481241458306, is an original replacement part designed for Whirlpool and Bauknecht washing machines. It allows users to select various wash programs. This knob measures approximately 40 mm in diameter and 50 mm in depth.

Obrázek 1: Přední view of the Whirlpool Washing Machine Program Knob.

Klíčové vlastnosti:

• Quality replacement part for the washing machine's program selector.
• Equivalent to product code 481241458306.
• Designed for Whirlpool and Bauknecht washing machines.

3. Instalace

Proper installation ensures the longevity and correct function of your new program knob. Follow these steps carefully.

Bezpečnostní opatření:

• Always unplug the washing machine from the power outlet before beginning any installation or maintenance to prevent electrical shock.
• V případě potřeby používejte vhodné osobní ochranné prostředky.

Kroky instalace:

1. Příprava: Ujistěte se, že je pračka odpojena od elektrické zásuvky.
2. Demontáž starého knoflíku (pokud je k dispozici): Gently pull the old program knob straight off the control shaft. If it is stuck, a slight twisting motion while pulling may help. Avoid excessive force to prevent damage to the control panel or shaft.
3. Zkontrolujte hřídel: Examine the control shaft for any damage or debris. Clean the shaft if necessary to ensure a smooth fit for the new knob.
4. Instalace nového knoflíku: Align the new Whirlpool Program Knob (Model 481241458306) with the control shaft. The internal splines of the knob (as shown in Figure 2) should match the shaft. Push the knob firmly onto the shaft until it is securely seated. Do not force it if it doesn't align; re-check alignment.
5. Test funkčnosti: Once installed, gently turn the knob to ensure it rotates smoothly and engages with the program selector mechanism. Reconnect the washing machine to power and test program selection.

Obrázek 2: Zadní view of the program knob, illustrating the internal shaft receiver for proper alignment.

4. Provoz

To operate the washing machine program knob, simply turn it clockwise or counter-clockwise to select the desired wash program. Ensure the knob clicks into place for each program selection to confirm it is properly engaged.

5. Údržba

To maintain the appearance and functionality of your program knob, wipe it periodically with a soft, damp cloth. Avoid using abrasive cleaners, harsh chemicals, or solvents, as these can damage the finish or material of the knob.

6. Řešení problémů

• Knoflík je uvolněný: If the knob feels loose after installation, remove it and re-install, ensuring it is pushed firmly onto the control shaft until fully seated. Verify that the internal splines are correctly aligned with the shaft.
• Knob Does Not Turn or Feels Stiff: If the knob does not turn or feels stiff, ensure it is correctly aligned and fully seated on the shaft. Do not force it, as this may damage the knob or the washing machine's internal mechanism. If the issue persists, the internal mechanism of the washing machine's program selector may require professional inspection.

7. Specifikace

8. Záruka a podpora

Specific warranty information for this replacement part is not provided in this manual. For warranty details or further technical assistance, please refer to your washing machine's main instruction manual or contact Whirlpool customer support directly. Keep your purchase receipt for any warranty claims.