Zavedení
This user manual provides comprehensive instructions for the installation, operation, and maintenance of your Hunter Sprinkler XC600 X-Core 6-Station Outdoor Irrigation Controller. The X-Core is an entry-level residential controller designed for reliable performance. It can be enhanced with a Solar Sync ET sensor (sold separately) to transform it into a smart controller, optimizing irrigation runtimes based on local weather conditions for efficient water conservation.
Konec produktuview a funkce
Obrázek 1: Přední strana view of the Hunter XC600 X-Core Controller with its protective door open, displaying the control panel and included keys.
The Hunter XC600 X-Core controller offers a range of features designed for ease of use and efficient irrigation management:
- 6-Station Control: Manages up to six independent irrigation zones.
- Více programů: Supports 3 independent programs (A, B, C) with 4 start times each, allowing for flexible scheduling.
- Automatic Short Circuit Protection: Protects the controller from electrical damage due to wiring faults.
- Snadné načtení paměti: Stores all programming in non-volatile memory, ensuring settings are retained even during power outages.
- Hunter Quick Check: A diagnostic feature that helps identify and troubleshoot field wiring issues quickly.
- ROAM Remote Control Compatibility: Can be operated remotely with Hunter's ROAM Remote Control (sold separately).
- Solar Sync ET Sensor Compatibility: Integrates with the Solar Sync ET sensor for automatic seasonal adjustment and water conservation.
Nastavení a instalace
Montáž ovladače
Figure 2: The Hunter XC600 X-Core Controller securely mounted on an outdoor brick wall, ready for wiring connections.
- Choose a suitable outdoor location, protected from direct sunlight and extreme weather conditions if possible, though the unit is designed for outdoor use.
- Use the provided mounting template or mark the two mounting holes on the wall. Ensure the controller is level.
- Drill pilot holes and insert appropriate wall anchors (if necessary).
- Připevněte ovladač ke zdi pomocí dodaných šroubů.
Připojení vodičů
Figure 3: Internal wiring compartment of the Hunter XC600 X-Core controller, showing the terminal block for station, common, and sensor wire connections.
- Připojení napájení: The controller operates on 120 Volts AC. Connect the power cord to a grounded outdoor outlet. For direct wiring, consult a qualified electrician.
- Zapojení ventilu: Připojte jeden vodič z každého solenoidového ventilu k očíslované svorce (1-6) na řídicí jednotce.
- Společný drát: Connect the common wire from all solenoid valves to the terminal marked "COM". This is crucial for valve operation.
- Master Valve/Pump Start Relay (Optional): If using a master valve or pump start relay, connect its common wire to the "COM" terminal and its control wire to the terminal marked "MV".
- Sensor Wiring (Optional): For rain sensors or Solar Sync ET sensors, connect the sensor wires to the designated "SEN" terminals. Refer to your sensor's manual for specific wiring instructions. Ensure the sensor bypass switch is in the "ACTIVE" position if a sensor is connected.
Návod k obsluze
The X-Core controller features a user-friendly dial and button interface for easy programming and operation.
Nastavení data a času
- Otočte voličem na Datum/čas pozice.
- Použijte + or - buttons to adjust the year, month, day, hour, and minute. Press the > pro přechod na další nastavení.
Nastavení časů zahájení
- Otočte voličem na Start Times pozice.
- Použijte + or - buttons to set the desired start time for Program A (P-A).
- Stiskněte tlačítko > button to move to the next start time or program. You can set up to 4 start times per program.
Setting Run Times
- Otočte voličem na Run Times pozice.
- The display will show the program (e.g., P-A) and station number (e.g., S-1). Use the + or - buttons to set the run time for the current station.
- Stiskněte tlačítko > button to move to the next station. Repeat for all stations in the program.
- To switch programs (A, B, C), press the PROG tlačítko.
Nastavení dnů vody
- Otočte voličem na Vodní dny pozice.
- Použijte + or - buttons to select specific days of the week for watering. A blinking water drop icon indicates the selected day. Press > přesunout na další den.
- Alternatively, you can choose odd/even day watering or interval watering.
Ruční provoz
- Manual Single Station: Otočte voličem na Manuál. Použijte > button to select the station you wish to run. Use + or - to set the run time. The station will begin watering immediately.
- Manual All Programs: Otočte voličem na Manuál. Stiskněte tlačítko PROG button to select "ALL". All programmed stations will run sequentially.
Systém vypnutý
To stop all automatic watering, turn the dial to the Systém vypnutý position. The display will show "OFF".
Seasonal Adjust (with Solar Sync)
Video 1: Official Hunter X-Core Irrigation Controller Product Guide. This video provides a detailed overview of the controller's features and programming, including water-saving capabilities like seasonal adjustment with Solar Sync.
If a Solar Sync ET sensor is connected, the controller will automatically adjust run times based on local weather. You can manually override this by turning the dial to Sezónní úprava and setting a percentage. This feature helps optimize water usage throughout the year.
Údržba
- Čištění: Periodically wipe down the controller's exterior with a damp tkanina. Nepoužívejte abrazivní čisticí prostředky nebo rozpouštědla.
- Kontrola elektroinstalace: Annually inspect all wiring connections for corrosion or damage. Ensure all terminals are secure.
- Kontrola senzoru: If using a rain or ET sensor, ensure it is clean and free from obstructions. Test its functionality periodically according to the sensor's manual.
- Zima: In regions subject to freezing temperatures, disconnect the power and drain all water from the irrigation system to prevent freeze damage to pipes and valves. The controller itself is designed for outdoor use but protecting it from direct ice buildup is recommended.
Odstraňování problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Displej ovladače je prázdný. | No power to the controller; tripped circuit breaker; faulty transformer. | Check power outlet, circuit breaker. Ensure transformer is securely connected. |
| A specific zone does not water. | Faulty solenoid; broken wire; clogged nozzle; system off or rain sensor active. | Check solenoid for clicks; inspect wiring for breaks (use Hunter Quick Check); clean or replace nozzles; ensure system is not off and sensor bypass is correct. |
| All zones do not water. | Master valve not opening; common wire disconnected; system off; rain sensor active. | Check master valve operation; verify common wire connection; ensure dial is not in "System Off" position; check rain sensor status. |
| "ERR" message on display. | Wiring short circuit detected (Automatic Short Circuit Protection). | Identify and repair the short circuit in the field wiring. The Hunter Quick Check feature can assist. |
Specifikace
- Číslo modelu: XC600
- Rozměry produktu: 5 x 7 x 10 palce
- Hmotnost položky: 1.2 libry
- svtage: 120 voltů (AC)
- Materiál: Plast
- Barva: Šedá
- Výrobce: Hunter Industries
- Země původu: USA
Záruka a podpora
For detailed warranty information, please refer to the warranty card included with your product or visit the official Hunter Industries website. Hunter Industries provides support for their products through their website and authorized dealers.
Více informací a podpůrných zdrojů naleznete na Obchod Hunter na Amazonu or the official Hunter Industries webmísto.
