Hunter NODE 2-Station Irrigation Controller User Manual

Zavedení

The Hunter NODE 2-Station Irrigation Controller is designed for efficient and reliable irrigation management in isolated or power-restricted areas. This battery-powered controller offers robust construction and a waterproof exterior, making it suitable for installation in valve boxes. Its user-friendly interface and advanced programming capabilities ensure precise watering schedules for your landscape.

Konec produktuview

Obrázek 1: Přední strana view of the Hunter NODE 2-Station Irrigation Controller, showing the LCD display, control buttons (plus, minus, left, right, enter, program), and wiring connections at the top.

The NODE controller features an easy-to-program LCD screen and intuitive buttons for setting up watering schedules. It is powered by one or two 9V batteries, providing extended operation throughout the season. The unit is designed for quick and easy mounting to a valve's solenoid without the need for screws, drills, or additional wires.

Nastavení a instalace

1. Instalace baterie

1. Locate the battery compartment on the back of the NODE controller.
2. Otevřete kryt přihrádky.
3. Insert one or two new 9V alkaline batteries, ensuring correct polarity. The controller can operate with one battery, but two batteries will provide extended power.
4. Bezpečně zavřete kryt přihrádky na baterie, abyste zachovali vodotěsnost.

2. Montáž regulátoru

The NODE controller is designed for direct mounting to a valve solenoid or a wall. For valve box installation, it is recommended to mount it directly to the solenoid for optimal waterproof protection.

• Solenoid Mounting: The controller features a unique mounting system that allows it to attach directly to a standard solenoid. Simply align the controller's mounting ring with the solenoid and twist to secure.
• Montáž na stěnu: If mounting to a wall or other surface, use appropriate screws (not included) through the designated mounting holes. Ensure the location is protected from direct sunlight and extreme temperatures if not in a valve box.

3. Připojení vodičů

Connect the controller to your irrigation system's valves. The NODE200 supports two stations.

• Connect the common wire from your valves to the terminal labeled COM na ovladači.
• Connect the wire for Station 1 to the terminal labeled 1.
• Connect the wire for Station 2 to the terminal labeled 2.
• If using a rain sensor, connect it to the SEN terminals. Refer to your rain sensor's manual for specific wiring instructions.

Návod k obsluze

The NODE controller uses standard Hunter controller programming, offering 3 programs (A, B, C) and 4 start times per program.

1. Nastavení aktuálního času a dne

1. Stiskněte tlačítko PROG tlačítko, dokud nezačne blikat zobrazení času.
2. Použijte + or - tlačítka pro nastavení hodiny. Stiskněte ENTER tlačítko pro potvrzení.
3. Adjust minutes and then AM/PM using the + or - tlačítka, každé z nich potvrďte ENTER.
4. Bude blikat den v týdnu. Použijte + or - buttons to select the current day, then press ENTER.

2. Programování zavlažovacích plánů

Each program (A, B, C) can have up to 4 start times and independent run times for each station.

1. Stiskněte tlačítko PROG button to cycle through programs (A, B, C) and programming options.
2. When a program (e.g., A) is displayed, use the ŠIPKA VPRAVO button to navigate to the first start time.
3. Adjust the start time using + or -a poté stiskněte ENTER. Repeat for up to 4 start times.
4. Navigate to the run time setting for Station 1. Adjust the duration in minutes using + or -a poté stiskněte ENTER. Repeat for Station 2.
5. Navigate to the watering days setting. Use the + or - buttons to select specific days of the week, or choose odd/even day watering. Press ENTER potvrdit.
6. Repeat for Programs B and C if additional schedules are needed.

3. Ruční provoz

To manually run a station or program:

• Stiskněte a podržte ŠIPKA VPRAVO button for a few seconds. The display will show "MANUAL".
• Použijte + or - buttons to select the station you wish to run manually.
• Stiskněte ENTER to start the manual watering. The station will run for its programmed duration.
• To stop manual watering, press the ŠIPKA VPRAVO znovu tlačítko.

Údržba

• Výměna baterie: Replace 9V batteries annually, or when the low battery indicator appears on the LCD screen. Although programs are saved after battery depletion, regular replacement ensures uninterrupted operation.
• Čištění: Pravidelně čistěte vnější povrch regulátoru čisticím prostředkem.amp tkanina. Nepoužívejte abrazivní čisticí prostředky nebo rozpouštědla.
• Zima: In regions subject to freezing temperatures, remove the controller and batteries for storage indoors during winter months to prevent damage.

Odstraňování problémů

Specifikace

• Model: UZEL 200
• stanice: 2
• Zdroj napájení: 1 or 2 x 9V alkaline batteries
• programy: 3 nezávislé programy (A, B, C)
• Počáteční časy: 4 časů spuštění na program
• Doba běhu: 1 minute to 6 hours per station
• Časový plán zavlažování: Days of the week, Odd/Even days
• Rozměry: Přibližně 7 x 5 x 10 cm (rozměry produktu)
• Hmotnost: Přibližně 1.2 libry (hmotnost položky)
• Provozní teplota: 18 °F až 140 °F (-8 °C až 60 °C)

Záruka a podpora

Hunter products are manufactured to the highest quality standards. For information regarding warranty coverage, technical support, or service, please visit the official Hunter webnebo kontaktujte jejich zákaznický servis. Uschovejte si účtenku jako doklad o koupi.

Pro další pomoc můžete navštívit Obchod Hunter na Amazonu nebo úředník výrobce webmísto.