1. Úvod
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your EDEN 126 Aquarium Pump. Please read these instructions carefully before use and retain them for future reference.
2. Konec produktuview
The EDEN 126 Aquarium Pump is designed for water filtration and circulation in aquariums. It features a durable, super quiet, and low energy consumption design, equipped with a 6-level flow regulator. It is suitable for both freshwater and saltwater aquariums.

Image: The EDEN 126 Aquarium Pump, a compact black unit with suction cups on the bottom and a flow regulator dial on the front.
Klíčové vlastnosti:
- Robust Aquarium Pump: Designed for filtering and circulating water in the aquarium, the EDEN 126 (800 l/h) is a powerful and robust pump suitable for submerged use.
- Dlouhá životnost: Thanks to its robust rotor design, the submersible pump has a long lifespan. It operates quietly, ensuring it does not disturb fish, even during continuous operation.
- Ochrana proti přetížení: Equipped with thermal overload protection, the filtration pump can operate continuously without issues, ensuring better maintenance and increased oxygen circulation in the aquarium.
3. Nastavení a instalace
- Rozbalení: Opatrně vyjměte čerpadlo a veškeré příslušenství z obalu. Zkontrolujte, zda není poškozeno.
- Umístění: The pump is designed for submerged use. Place the pump entirely underwater in your aquarium. The suction cups on the base can be used to secure it to the bottom or side of the tank.
- Připojovací hadice: Attach appropriate hoses (not included) to the pump's outlet nozzle for water circulation or filtration systems as required. Ensure all connections are secure to prevent leaks.
- Připojení napájení: Once the pump is fully submerged and all connections are secure, connect the power cable to a suitable electrical outlet.
Důležité: Always ensure the pump is fully submerged before connecting to power to prevent damage from dry running.
4. Návod k obsluze
The EDEN 126 pump is designed for continuous operation.
- Spuštění čerpadla: After installation, simply plug the pump into the electrical supply. The pump will begin to operate immediately.
- Nastavení průtoku: The pump features a 6-level flow regulator. Rotate the dial on the front of the pump to adjust the water flow rate according to your aquarium's needs.

Obrázek: Detailní záběr view of the EDEN 126 pump's flow regulator dial, showing the adjustable settings.
The maximum flow rate is 800 l/h, and the maximum head height is 1.5 m.
5. Údržba
Regular maintenance ensures optimal performance and extends the lifespan of your EDEN 126 pump.
- Odpojit napájení: Před prováděním jakékoli údržby vždy odpojte čerpadlo od elektrické zásuvky.
- Čištění oběžného kola:
- Carefully remove the front cover of the pump.
- Gently pull out the impeller assembly.
- Clean the impeller and its housing with a soft brush under running water to remove any debris, algae, or mineral deposits.
- Ensure the impeller spins freely before reassembling.
- Cleaning the Intake Grille: Clean the intake grille regularly to prevent blockages and maintain efficient water flow.
- Generální úklid: Otřete vnější povrch čerpadla reklamouamp tkanina. Nepoužívejte agresivní chemikálie nebo abrazivní čisticí prostředky.
- Opětovná montáž: Všechny díly sestavte zpět v opačném pořadí a ujistěte se, že jsou bezpečně upevněny.
Frekvence: It is recommended to clean the pump at least once a month, or more frequently depending on the water conditions and debris accumulation in your aquarium.
6. Řešení problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Čerpadlo se nespouští | No power supply; Impeller jammed; Motor failure. | Check power connection; Clean impeller; Contact support if motor failure is suspected. |
| Snížený průtok | Clogged intake/impeller; Flow regulator setting too low. | Clean intake grille and impeller; Adjust flow regulator to a higher setting. |
| Nadměrný hluk/vibrace | Impeller dirty or damaged; Pump not securely placed. | Clean or replace impeller; Ensure pump is firmly secured with suction cups. |
| Čerpadlo se přerušovaně zastavuje | Overheating (thermal overload protection activated); Blockage. | Unplug, let cool, then clean pump thoroughly; Ensure adequate water flow. |
If the problem persists after attempting these solutions, please contact EDEN customer support.
7. Technické specifikace
| Atribut | Hodnota |
|---|---|
| Číslo modelu | 57178 |
| Značka | ráj |
| Výrobce | PFG |
| Rozměry (D x Š x V) | 8 x 9 x 13.5 cm |
| Hmotnost | 540 gramů |
| Barva | Černý |
| Zdroj napájení | Elektrický kabel |
| svtage | 230 voltů (AC) |
| Průtok | 800 l/h |
| Maximální výška hlavy | 1.5 m |
| Mezinárodní kód zboží (EAN) | 04010052571782 |
8. Záruka a podpora
Information regarding spare parts availability is not available. For warranty claims or technical support, please contact your retailer or the manufacturer directly. Keep your proof of purchase for any warranty inquiries.
For further assistance, please refer to the official EDEN webmísto: www.eden-aquaristik.com nebo kontaktujte jejich oddělení zákaznických služeb.






