TROTEC IDE 20 D Diesel Heater Instruction Manual

1. Úvod

This manual provides essential information for the safe and efficient operation of your TROTEC IDE 20 D diesel heater. Please read these instructions carefully before initial use and keep them for future reference. The TROTEC IDE 20 D is a direct-fired diesel heater designed for heating well-ventilated areas, offering a nominal heat output of 20 kW and an air flow of 595 m³/h.

Obrázek 1: Hlavní view of the TROTEC IDE 20 D Diesel Heater, showing its robust design with wheels and handle for portability.

2. Bezpečnostní pokyny

Vždy dodržujte následující bezpečnostní opatření, abyste předešli zranění nebo poškození zařízení:

• Ensure adequate ventilation when operating the heater, as it is a direct-fired unit and consumes oxygen.
• Do not use the heater in enclosed spaces or residential areas without proper ventilation.
• Maintain a safe distance from combustible materials. Refer to local regulations for minimum clearances.
• Only use approved diesel fuel. Never use gasoline or other volatile fuels.
• Do not refuel the heater while it is running or hot. Allow it to cool down completely.
• Keep children and unauthorized persons away from the operating heater.
• Regularly inspect the power cord and plug for damage. Do not operate with a damaged cord.
• The heater is equipped with overheat protection. Do not bypass or modify safety features.
• Always place the heater on a stable, level, and non-combustible surface.

3. Obsah balení

Po vybalení ověřte, zda jsou přítomny všechny komponenty:

• TROTEC IDE 20 D Diesel Heater unit
• Wheel assembly (wheels, axle, fasteners)
• Montáž rukojeti
• Návod k použití

4. Nastavení

4.1 Montáž

The heater requires minimal assembly before first use. Attach the wheels and handle to the main unit using the provided hardware. Ensure all connections are secure.

Obrázek 2: Boční strana view of the heater, illustrating the wheel and handle attachment points for mobility.

4.2 Doplňování paliva do ohřívače

1. Ensure the heater is turned off and unplugged.
2. Locate the fuel cap on top of the fuel tank.
3. Carefully pour clean diesel fuel into the tank. The tank capacity is 19 liters.
4. Monitor the fuel level indicator to avoid overfilling.
5. Bezpečně nasaďte víčko palivové nádrže.

Image 3: Detail of the fuel cap and integrated fuel level indicator for easy monitoring.

4.3 Umístění

Position the heater in a well-ventilated area, ensuring sufficient clearance from walls, ceilings, and any combustible materials. The heater should be placed on a firm, level surface.

5. Návod k obsluze

5.1 Spuštění ohřívače

1. Ensure the heater is properly fueled and positioned.
2. Zapojte napájecí kabel do vhodné elektrické zásuvky.
3. Turn the power switch to the "ON" position. The fan will start, and the ignition sequence will begin.
4. The heater will automatically ignite the diesel fuel and begin producing heat.

Image 4: The control panel featuring the power switch and thermostat dial.

5.2 Adjusting Temperature (Thermostat)

The TROTEC IDE 20 D features an integrated thermostat. Use the thermostat dial on the control panel to set the desired temperature. The heater will cycle on and off automatically to maintain the set temperature.

Obrázek 5: Přední strana view displaying the fan guard and pressure gauge, indicating operational status.

5.3 Vypnutí ohřívače

To turn off the heater, switch the power button to the "OFF" position. The fuel supply will be cut off, but the fan will continue to run for approximately 90 seconds to cool down the unit before completely shutting off. This cool-down period is crucial for the longevity of the heater components.

6. Údržba

6.1 Čištění

Ensure the heater is unplugged and completely cool before performing any cleaning. Wipe the exterior surfaces with a damp cloth. Do not use abrasive cleaners or solvents. Periodically check the air intake and fan for dust or debris accumulation and clean as necessary to maintain optimal airflow.

6.2 Palivový filtr

Regularly inspect and clean or replace the fuel filter to ensure a consistent fuel supply and efficient operation. Refer to the service manual for specific instructions on accessing and maintaining the fuel filter.

6.3 Skladování

When storing the heater for extended periods, ensure the fuel tank is empty or filled with fresh, stabilized diesel fuel. Store the unit in a dry, clean environment, protected from dust and moisture. It is recommended to cover the heater to prevent dust buildup.

Image 6: The heater with its power cord neatly coiled, ready for storage or transport.

7. Řešení problémů

Než kontaktujete zákaznickou podporu, znovuview následující běžné problémy a jejich řešení:

8. Specifikace

9. Záruka a podpora

For warranty information, technical support, or spare parts, please contact TROTEC customer service. Details can typically be found on the manufacturer's official website or on your purchase documentation. Always provide the model number (IDE 20 D) and serial number (if applicable) when seeking support.

Poznámka: Informace o dostupnosti náhradních dílů nejsou uvedeny v produktových údajích.