Návod k obsluze pulzního oxymetru Gima OXY-50 na prst

Zavedení

The Gima OXY-50 is a portable fingertip pulse oximeter designed for non-invasive spot-check and continuous monitoring of arterial oxygen saturation (SpO2) and pulse rate (PR). This device is suitable for use in hospitals, clinics, and home environments for adults and pediatric patients. It features a color OLED display, adjustable alarm limits, and data recording capabilities.

Důležité bezpečnostní informace

• Consult a physician before using this device for medical diagnosis. This device is not intended for self-diagnosis or self-treatment.
• Udržujte zařízení mimo dosah dětí.
• Používejte pouze specifikovaný typ baterií (4 baterií AAA).
• Nepoužívejte zařízení v prostředí MRI nebo CT.
• Avoid using the device in environments with flammable anesthetics or other explosive substances.
• Neponořujte zařízení do vody nebo jiných kapalin.
• Před měřením se ujistěte, že je prst čistý a suchý. Lak na nehty nebo umělé nehty mohou ovlivnit přesnost.

Konec produktuview

Komponenty

The Gima OXY-50 consists of the main unit with a color OLED display, control buttons, and a finger probe connection port. The device is designed for ease of use and portability.

Figure 1: Gima OXY-50 Pulse Oximeter main unit. This image shows the compact, handheld device with its color display and control buttons.

Přední panel a displej

The front panel features the color OLED display and intuitive control buttons for power, menu navigation, and settings adjustment. The display provides clear readings of oxygen saturation and pulse rate.

Obrázek 2: Detailní view of the Gima OXY-50 front panel. Labels indicate the SpO2 and PR readings, pulse waveform, battery status, and the functions of the power and navigation buttons.

Klíčové vlastnosti

• 1.8-inch color OLED display with 160x128 resolution.
• Audible alarm and pulse tone.
• Data recording capability for up to 24 hours.
• Adjustable upper and lower alarm limits.
• PC software for real-time data transfer.

Nastavení

Instalace baterie

The Gima OXY-50 requires 4 AAA batteries (included). To install or replace batteries:

1. Vyhledejte kryt přihrádky na baterie na zadní straně zařízení.
2. Posuňte nebo zvedněte kryt pro otevření přihrádky.
3. Vložte 4 baterie typu AAA a dbejte na správnou polaritu (+/-) dle vyznačení uvnitř přihrádky.
4. Bezpečně zavřete kryt bateriového prostoru.

Počáteční zapnutí

After installing the batteries, press the 'Power' button (usually marked with a universal power symbol) on the front panel to turn on the device. The display will illuminate, indicating the device is ready for use.

Návod k obsluze

Měření

Follow these steps to obtain an accurate SpO2 and pulse rate reading:

1. Ujistěte se, že je zařízení zapnuté.
2. Otevřete třamp of the finger probe.
3. Insert your finger into the probe, ensuring it is fully seated and the sensor is on the top of your finger. The probe should be placed on a clean, dry finger.
4. Uvolněte třamp. Do not move your hand or finger during the measurement process.
5. The device will automatically begin measuring SpO2 and pulse rate. Readings will appear on the color OLED display.
6. Once the reading stabilizes, you can record the values. Remove your finger from the probe to turn off the device automatically after a few seconds.

Pochopení displeje

The 1.8-inch color OLED display provides the following information:

• %SpO2: Oxygen Saturation level, displayed as a percentage.
• PR tepy/min: Tepová frekvence v tepech za minutu.
• Sloupcový graf pulsu: A visual representation of pulse strength.
• Plethysmograph Waveform: A real-time graphical display of the pulse.
• Indikátor baterie: Ukazuje zbývající životnost baterie.
• Audible Signal Indicator: Indicates if the pulse tone is active.

Nastavení alarmu

The device features adjustable high and low alarm limits for SpO2 and pulse rate. To adjust these settings:

1. Press the 'Menu' button to enter the settings menu.
2. Use the navigation buttons (Up/Down) to select 'Alarm Settings'.
3. Press 'Menu' again to enter the alarm settings sub-menu.
4. Adjust the desired high and low limits for SpO2 and PR using the navigation buttons.
5. Press 'Menu' to confirm your selections and exit the alarm settings.

Data Recording and Transfer

The Gima OXY-50 can record measurement data for up to 24 hours. A dedicated PC software is available for real-time data transfer and analysis. Connect the device to your computer using the USB port and follow the instructions provided with the software for data management.

Údržba

Čištění

To ensure hygiene and proper functioning:

• Clean the device surface and the finger probe with a soft cloth dampened with a mild disinfectant, such as 70% isopropyl alcohol.
• Neponořujte zařízení do žádné kapaliny.
• Ensure the device is completely dry before its next use.

Výměna baterie

When the low battery indicator appears on the display, replace all 4 AAA batteries promptly to maintain accurate readings and device functionality. Refer to the 'Battery Installation' section for instructions.

Skladování

Store the Gima OXY-50 in a cool, dry place, away from direct sunlight, extreme temperatures, and high humidity. If the device will not be used for an extended period, it is recommended to remove the batteries.

Odstraňování problémů

Specifikace

• Číslo modelu: 35100
• Zobrazit: 1.8-inch color OLED, 160x128 resolution
• Napájení: 4 x AAA baterie (součástí balení)
• Rozměry produktu (D x Š x V): 20 x 24 x 14 cm
• Hmotnost: 360 gramů
• Záznam dat: Až 24 hodin
• Poplach: Adjustable high/low limits for SpO2 and Pulse Rate
• Výrobce: OXY

Záruka a podpora

For detailed warranty information, technical support, or service inquiries, please refer to the documentation provided with your purchase or contact your local Gima distributor. Keep your purchase receipt as proof of purchase for any warranty claims.