Konec produktuview
The Weiser Augusta GA9771A15B is a single cylinder sectional handleset outer trim package designed for residential and light commercial applications. This handleset features a satin nickel finish and includes the complete upper and lower outside trim components. It is engineered for durability and ease of installation, meeting ANSI Grade 2 rating requirements.
Image: Weiser Augusta Handleset in Satin Nickel. This image displays the complete outer trim assembly, including the upper deadbolt cylinder and the lower handleset with its curved lever, all in a satin nickel finish.
Nastavení a instalace
This section provides general guidelines for installing the Weiser Augusta Handleset. For detailed instructions, refer to the installation template included with your product. Professional installation is recommended if you are unfamiliar with door hardware installation.
Než začnete:
- Ensure all components are present: upper and lower outside trim, adjustable backset latch, and strike plate.
- Verify door thickness and backset measurement. The adjustable backset latch supports 2 3/8 inches to 2 3/4 inches.
- Gather necessary tools: screwdriver, tape measure, pencil, drill (if new holes are required).
Kroky instalace (obecné):
- Prepare the door: Ensure existing holes are clean and correctly sized. If installing on a new door, mark and drill holes according to the provided template.
- Install the latch: Insert the adjustable backset latch into the door edge. Ensure the latch bolt faces the correct direction for door swing. Secure with screws.
- Install the strike plate: Attach the standard full lip strike plate to the door frame, aligning it with the latch bolt.
- Assemble the handleset: Connect the upper and lower outside trim components to the interior mechanisms. Ensure proper alignment and secure all fasteners.
- Test operation: Verify that the deadbolt and handleset operate smoothly and latch securely.
Návod k obsluze
The Weiser Augusta Handleset is designed for straightforward operation.
Locking the Handleset:
- Z exteriéru: Insert the key into the upper deadbolt cylinder and turn to extend the deadbolt. Remove the key.
- Z interiéru: Rotate the thumbturn on the interior side of the deadbolt to extend the deadbolt.
Unlocking the Handleset:
- Z exteriéru: Insert the key into the upper deadbolt cylinder and turn to retract the deadbolt.
- Z interiéru: Rotate the thumbturn on the interior side of the deadbolt to retract the deadbolt.
Otevírání dveří:
Once unlocked, depress the handleset lever to retract the latch bolt and open the door.
Údržba
Proper maintenance will ensure the longevity and smooth operation of your Weiser Augusta Handleset.
- Čištění: Saténový niklový povrch očistěte měkkým hadříkemamp hadříkem. Nepoužívejte abrazivní čisticí prostředky, rozpouštědla ani lešticí prostředky, protože by mohly poškodit povrchovou úpravu.
- Mazání: Periodically apply a small amount of graphite lubricant or a silicone-based spray to the keyway and the latch mechanism to ensure smooth operation. Do not use oil-based lubricants as they can attract dust and debris.
- Kontrola upevňovacích prvků: Annually check all mounting screws and fasteners to ensure they are tight. Loose screws can affect the handleset's performance and security.
- Expozice prostředí: While designed for outdoor use, extreme weather conditions may require more frequent cleaning and inspection.
Odstraňování problémů
This section addresses common issues you might encounter with your handleset.
| Problém | Možná příčina | Řešení |
|---|---|---|
| Klíč se obtížně zasouvá nebo otáčí. | Dirt or debris in keyway; worn key; lack of lubrication. | Vyčistěte drážku pro klíč stlačeným vzduchem. Naneste grafitové mazivo. Zkuste použít náhradní klíč. |
| Západka se nezasouvá hladce. | Misalignment; debris in latch mechanism; loose screws. | Check alignment of strike plate and latch. Clean mechanism. Tighten mounting screws. |
| Deadbolt does not extend fully. | Misalignment with strike plate hole; obstruction. | Adjust strike plate position. Clear any obstructions in the door frame. |
| Rukojeť se zdá být volná. | Uvolněné montážní šrouby. | Utáhněte všechny viditelné montážní šrouby. |
Specifikace
| Funkce | Detail |
|---|---|
| Číslo modelu | GA9771A15B |
| Značka | Weiser |
| Typ produktu | Single Cylinder Sectional Handleset Outer Trim Package |
| Dokončit | Saténový nikl |
| Materiál | Kov |
| Typ zámku | Key Lock (Single Cylinder) |
| Backset | Adjustable, 2 3/8" - 2 3/4" |
| Úderová deska | Standard Full Lip |
| ANSI Rating | Grade 2 (Meets light commercial, exceeds residential) |
| Zahrnuté komponenty | Latch, Lock (Outer Trim Only) |
| UPC | 059184214574 |
Záruka a podpora
Weiser products are manufactured to the highest standards of quality and durability. For specific warranty information and customer support, please refer to the documentation included with your purchase or visit the official Weiser webUschovejte si doklad o koupi pro případ reklamace.
For technical assistance or to inquire about replacement parts, please contact Weiser customer service directly. Contact information can typically be found on the manufacturer's webmístě nebo na obalu produktu.