Intel I210-T1 Network Adapter E0X95AA User Manual

1. Úvod

This manual provides detailed instructions for the installation, operation, and maintenance of the Intel I210-T1 Network Adapter E0X95AA. The Intel Ethernet Server Adapter I210 is a PCIe Gigabit Ethernet network adapter designed for enterprise and data center environments, featuring Audio-Video-Bridging (AVB) support and power management technologies such as Energy Efficient Ethernet (EEE) and DMA Coalescing (DMAC).

2. Vlastnosti produktu

• Low-halogen single-port PCI-Express 10/100/1000 Ethernet adapter: Provides reliable Gigabit Ethernet connectivity.
• Pokročilá správa napájení: Includes Energy Efficient Ethernet (EEE), DMA Coalescing, and an ultra-compact design with a ventilated bracket for improved efficiency and reduced power consumption.
• IEEE 802.1Qav Audio-Video-Bridging (AVB): Supports tightly controlled media stream synchronization, buffering, and reservation for high-quality audio and video applications.
• High-performing design: Supports PCI Express Gen 2.1 2.5 GT/s for efficient data transfer.
• Reliable Gigabit Ethernet Technology: Built with Intel's proven and dependable Ethernet technology.

3. Obsah balení

Ověřte, zda jsou v balení přítomny všechny položky:

• Intel I210-T1 Network Adapter
• Full-height bracket (pre-installed or included)
• Low-profile bracket (included for small form factor systems)

Obrázek 3.1: Intel I210-T1 Network Adapter with included full-height and low-profile brackets. The main adapter board is green with gold PCIe contacts, and the brackets are silver-colored metal.

4. Nastavení a instalace

Follow these steps to install the Intel I210-T1 Network Adapter into your computer system.

1. Systém vypnutí: Úplně vypněte počítač a odpojte napájecí kabel ze zásuvky.
2. Otevřete počítačovou skříň: Pro přístup k vnitřním komponentám sejměte boční panel skříně počítače.
3. Select Bracket (if necessary): If your computer uses a low-profile chassis, you may need to replace the pre-installed full-height bracket with the included low-profile bracket. To do this, remove the two small screws securing the full-height bracket to the adapter, carefully detach it, and then attach the low-profile bracket using the same screws.
4. Vyhledejte slot PCIe: Identify an available PCI Express (PCIe) slot on your motherboard. The Intel I210-T1 adapter requires a PCIe x1 slot or larger.
5. Vložkový adaptér: Carefully align the adapter with the chosen PCIe slot and press down firmly until it is securely seated. Ensure the gold contacts are fully inserted into the slot.
6. Bezpečný adaptér: Use a screw or the case's retention mechanism to secure the adapter to the computer chassis.
7. Close Computer Case: Znovu nasaďte boční panel skříně počítače.
8. Znovu připojte napájení: Zapojte napájecí kabel zpět do zásuvky a zapněte počítač.
9. Nainstalujte ovladače: Once the operating system loads, it may automatically detect and install the necessary drivers. If not, download the latest drivers from the official Intel website for the I210-T1 adapter and follow the installation instructions.

5. Návod k obsluze

After successful installation and driver setup, the Intel I210-T1 Network Adapter is ready for operation.

• Připojení ethernetového kabelu: Plug a standard RJ45 Ethernet cable from your network router, switch, or modem into the Ethernet port on the adapter.
• Ověřit připojení: Check the link/activity LEDs on the adapter's port. A solid green or amber light typically indicates a successful link, while a blinking light indicates network activity. Refer to your operating system's network settings to confirm the adapter is recognized and connected.
• Konfigurace nastavení sítě: Depending on your network environment, you may need to configure IP settings (DHCP or static IP), DNS servers, or other network parameters through your operating system's network control panel.

6. Údržba

To ensure optimal performance and longevity of your Intel I210-T1 Network Adapter, consider the following maintenance practices:

• Aktualizace ovladačů: Pravidelně kontrolujte oficiální informace od Intelu. website for updated drivers. Keeping drivers current can improve performance, stability, and compatibility.
• Odstranění prachu: Ensure proper airflow within your computer case. Over time, dust can accumulate on components, potentially leading to overheating. Gently clean the adapter and surrounding areas with compressed air if dust buildup is observed.
• Integrita kabelu: Regularly inspect your Ethernet cable for any signs of damage or wear. A damaged cable can lead to intermittent connectivity or reduced performance.

7. Řešení problémů

If you encounter issues with your Intel I210-T1 Network Adapter, refer to the following troubleshooting steps:

• Kontrolka bez propojení:
  • Ensure the Ethernet cable is securely connected to both the adapter and the network device (router/switch).
  • Zkuste jiný ethernetový kabel.
  • Verify that the network device is powered on and functioning correctly.
  • Check your operating system's Device Manager to ensure the adapter is recognized and enabled, and that there are no driver errors.
• Pomalé rychlosti sítě:
  • Ensure you are using a Gigabit-capable Ethernet cable (Cat5e or Cat6).
  • Verify that your network switch/router supports Gigabit Ethernet.
  • Update the network adapter drivers to the latest version from Intel's webmísto.
  • Check for other network congestion or issues on your network.
• Adaptér nebyl detekován:
  • Ensure the adapter is fully seated in the PCIe slot.
  • Try inserting the adapter into a different PCIe slot.
  • Check your system's BIOS/UEFI settings to ensure the PCIe slot is enabled.
  • Znovu nainstalujte ovladače.

8. Specifikace

9. Záruka a podpora

For information regarding warranty coverage, technical support, and additional resources, please refer to the official Intel website or contact Intel customer support directly. Specific warranty terms may vary by region and retailer.

Podpora Intel Webmísto: https://www.intel.com/content/www/us/en/support.html