Nástěnná lucerna Craftmade Z1414-07 – uživatelská příručka

1. Úvod

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Craftmade Z1414-07 Wall Lantern. Please read all instructions carefully before beginning installation and retain this manual for future reference.

This image displays the Craftmade Z1414-07 Wall Lantern. It features a robust black finish, three light sockets visible through textured seeded champagne glass panels, and a decorative star-shaped mounting plate. The overall design is traditional and suitable for outdoor use.

2. Bezpečnostní informace

VAROVÁNÍ: Nebezpečí úrazu elektrickým proudem.

• Disconnect power at the fuse box or circuit breaker before installation, servicing, or changing bulbs.
• All electrical connections must be in accordance with local and national electrical codes. If you are unsure about the installation process, consult a qualified electrician.
• This fixture is designed for 120-volt electrical systems.
• Nepřekračujte maximální watttage specifikované pro žárovky.
• This fixture is UL listed for wet and dry locations, making it suitable for outdoor use.

3. Obsah balení

Před zahájením instalace ověřte, zda jsou všechny komponenty přítomny:

• 1 x Craftmade Z1414-07 Wall Lantern Fixture
• 1 x montážní deska
• 2 x montážní šrouby
• 3 x Seeded Champagne Glass Shades
• Drátěné matice
• Instrukční list

4. Specifikace

5. Nastavení a instalace

Follow these steps to install your wall lantern:

1. Vypnout napájení: Before starting any electrical work, ensure the power supply to the junction box is turned off at the circuit breaker or fuse box.
2. Příprava montážní desky: Attach the mounting plate to the junction box using the provided mounting screws. Ensure it is securely fastened.
3. Proveďte elektrické připojení:
   • Connect the bare copper ground wire from the fixture to the ground wire from the junction box (usually bare copper or green) using a wire nut.
   • Připojte bílý (neutrální) vodič ze svítidla k bílému (neutrálnímu) vodiči ze spojovací krabice pomocí kabelové matice.
   • Připojte černý (fázový) vodič ze svítidla k černému (fázovému) vodiči ze spojovací krabice pomocí kabelové matice.
   Ujistěte se, že všechny spoje jsou těsné a bezpečné.
4. Montážní přípravek: Carefully align the fixture with the mounting plate and secure it in place using the fixture screws.
5. Instalace skleněných stínů: Gently place each seeded champagne glass shade into its designated position on the fixture. Secure them according to the specific design of the fixture (e.g., with clips or screws).
6. Instalace žárovek: Insert three bulbs (not included) into the sockets. Ensure the bulbs are of the correct base type and do not exceed the maximum wattage rating for the fixture.
7. Obnovit napájení: Jakmile je instalace dokončena a všechny komponenty jsou bezpečně zajištěny, obnovte napájení jističem nebo pojistkovou skříní.

6. Návod k obsluze

To operate your Craftmade Z1414-07 Wall Lantern, simply use the wall switch connected to the fixture. Ensure that the main power supply to the fixture is active.

7. Údržba

Regular maintenance will help prolong the life and appearance of your wall lantern:

• Čištění: To clean the fixture, ensure power is off. Wipe the exterior with a soft, damp cloth. Do not use abrasive cleaners, solvents, or polishes as these can damage the finish or glass.
• Výměna žárovky: Always turn off the power before replacing bulbs. Allow bulbs to cool completely before handling. Carefully remove the glass shades if necessary to access the bulbs. Replace with new bulbs of the same type and wattage.
• Inspekce: Periodically inspect the fixture for any signs of wear, loose connections, or damage. If any issues are found, disconnect power and consult a qualified electrician.

8. Řešení problémů

If you encounter issues with your wall lantern, refer to the following common problems and solutions:

• Světlo se nerozsvítí:
  • Check if the power is on at the circuit breaker or wall switch.
  • Ensure bulbs are securely screwed into the sockets and are not burnt out.
  • Verify electrical connections are secure (refer to Section 5).
• Blikání světla:
  • Ujistěte se, že jsou žárovky zcela utažené.
  • Zkontrolujte, zda nejsou uvolněné vodiče.
  • Test with new bulbs to rule out faulty bulbs.

If problems persist after troubleshooting, contact a qualified electrician or Craftmade customer support.

9. Záruka a podpora

This Craftmade Z1414-07 Wall Lantern includes a limited one-year warranty from the manufacturer, covering defects in materials and workmanship under normal use.

For technical assistance, warranty claims, or to inquire about replacement parts, please contact Craftmade customer service. Refer to your purchase documentation or the Craftmade official webstránky s aktuálními kontaktními informacemi.