SEIKO SQ767W Digital Alarm Clock User Manual

1. Úvod

Děkuji za nákupasing the SEIKO SQ767W Digital Alarm Clock. This compact and versatile clock features a digital display, dual alarms, a calendar, and displays both temperature and humidity. It is designed for convenience on your bedside table or desktop. This manual provides essential information for setup, operation, and maintenance to ensure optimal performance.

Obrázek 1: Přední strana view of the SEIKO SQ767W Digital Alarm Clock.

2. Vlastnosti produktu

• Duální budíky: Set two independent alarm times.
• Radio Wave Correction: Automatically corrects time by receiving standard radio waves (40 kHz/60 kHz automatic selection). Includes a radio wave off function.
• Digitální displej: Clear display of time, date, temperature, and humidity.
• Funkce odložení: Dočasně pozastaví budík.
• Funkce světla: Podsvítí displej pro lepší viditelnost za slabého osvětlení.
• Alarm Monitor: Allows checking the alarm sound.
• Alarm Auto Stop: Alarm automatically stops after 5 minutes.
• Plně automatický kalendář: Displays the correct date automatically.
• Zobrazení teploty/vlhkosti: Provides current room temperature and humidity readings.

3. Nastavení

3.1 Instalace baterie

1. Otevřete kryt prostoru pro baterie umístěný na zadní straně hodin.
2. Insert two (2) AA manganese batteries, ensuring correct polarity (+/-).
3. Bezpečně zavřete kryt bateriového prostoru.

The clock requires 2 AA batteries, which are included with the product.

3.2 Initial Power On and Radio Wave Reception

Upon battery installation, the clock will attempt to receive radio waves to set the time automatically. For best reception:

• Umístěte hodiny blízko okna.
• Avoid locations with potential radio interference, such as:
  • Inside buildings, basements, or areas with thick walls.
  • Poblíž vysokého objtage lines, TV towers, or train rails.
  • Close to electronic appliances (TVs, refrigerators, air conditioners, computers, etc.).
  • In vehicles (automotive, train, airplane).
  • Near metal furniture like steel desks.

If radio waves are not received, the clock will operate with quartz accuracy. Reception may vary depending on environmental conditions.

Figure 2: Radio wave coverage map for time synchronization.

4. Návod k obsluze

The control buttons are located on the back of the clock. Refer to Figure 3 for button identification.

Obrázek 3: Zpět view s ovládacími tlačítky.

4.1 Nastavení času a data

• Automatic Setting (Radio Wave): The clock attempts to set the time and date automatically via radio wave reception. Ensure the clock is placed in an optimal reception area.
• Ruční nastavení: If radio wave reception is not possible or desired, you can manually set the time and date using the '時刻/日付合わせ' (Time/Date Adjustment) button and other relevant controls on the back. Consult the detailed instructions for specific button sequences.

4.2 Nastavení alarmů (Alarm 1 a Alarm 2)

Hodiny mají dva nezávislé budíky.

1. Use the 'アラーム時刻合わせ' (Alarm Time Adjustment) button to select Alarm 1 or Alarm 2.
2. Adjust the desired alarm time using the appropriate adjustment buttons.
3. Toggle the 'アラーム1 ON/OFF' or 'アラーム2 ON/OFF' switch to activate or deactivate each alarm.

4.3 Snooze and Light Function

Press the large button on top of the clock to activate the snooze function when an alarm sounds. This button also illuminates the display temporarily when pressed outside of an alarm event.

4.4 Zobrazení teploty a vlhkosti

The clock continuously displays the current room temperature and humidity on its screen. No special action is required to view tyto čtení.

Obrázek 4: Detail digitálního displeje.

5. Údržba

5.1 Čištění

Hodiny otřete měkkým, suchým hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla, protože by mohly poškoditasing nebo displej.

5.2 Výměna baterie

Replace batteries when the display dims or the clock's functions become unreliable. Always replace both batteries at the same time with new AA manganese batteries. Dispose of used batteries according to local regulations.

6. Řešení problémů

• Clock not displaying time/functions: Zkontrolujte instalaci baterií a ujistěte se, že nejsou vybité.
• Čas je nesprávný: Ensure the clock is in an optimal location for radio wave reception. If automatic correction fails, manually set the time.
• Alarm nezní: Verify that the alarm is set to 'ON' and the alarm time is correctly configured.
• Displej je tmavý: Vyměňte baterie.
• Radio wave reception issues: Relocate the clock away from electronic devices, metal objects, or large structures that may interfere with signals.

7. Specifikace

8. Záruka a podpora

For warranty information or technical support, please refer to the documentation included with your purchase or contact SEIKO customer service. Keep your purchase receipt as proof of purchase.