1. Konec produktuview
The BMW Genuine 35-21-1-160-421 Rubber PAD353010 is an original equipment manufacturer (OEM) part designed specifically for BMW vehicles. This rubber pad is a critical component of the vehicle's pedal assembly, providing essential grip and comfort for the driver. Choosing a genuine OEM part ensures compatibility, high quality, and reliable performance, maintaining the original specifications and safety standards of your BMW.
This product is a direct replacement for the brake pedal rubber pad.
Image: The BMW Genuine Rubber Pedal Pad installed on a vehicle's brake pedal, showing its textured surface for enhanced grip.
2. Specifikace
| Číslo dílu | 35 21 1 160 421 |
| Název modelu | RUBBER PAD353010 |
| Značka | BMW |
| Hmotnost položky | 3 unce |
| Rozměry produktu | 4.25 x 3 x 1.75 palce |
| Materiál | Pryž |
3. Pokyny k instalaci
This section provides general guidance for replacing the brake pedal rubber pad. For detailed vehicle-specific instructions, always refer to your vehicle's official service manual or consult a qualified technician.
Potřebné nástroje (typické):
- Flathead screwdriver or pry tool (optional, for old pad removal)
- Rukavice (doporučeno)
Postup:
- Příprava: Ensure the vehicle is parked on a level surface with the engine off and parking brake engaged.
- Odstraňte starou podložku: Carefully pry off the existing rubber pad from the brake pedal. It is typically held in place by friction and a lip around the pedal arm. A flathead screwdriver can assist in prying it off, but be cautious not to damage the pedal arm.
- Clean Pedal Surface: Inspect the metal pedal arm for any debris, dirt, or residue. Clean the surface thoroughly to ensure a secure fit for the new pad.
- Instalace nové podložky: Align the new BMW Genuine Rubber Pedal Pad with the brake pedal arm. Start by hooking one edge of the rubber pad over the corresponding edge of the metal pedal. Then, firmly press and stretch the rest of the rubber pad over the remaining edges of the pedal arm until it is fully seated and secure. Ensure the pad is flush and does not move freely.
- Ověřte instalaci: Once installed, press the brake pedal several times to ensure the pad remains firmly in place and does not slip. Check for proper fit and feel.
Obrázek: Explodoval view diagram illustrating the components of a typical BMW pedal assembly, including the rubber pad (item 8 in the diagram).
4. Údržba
The BMW Genuine Rubber Pedal Pad is designed for durability and requires minimal maintenance.
- Pravidelná kontrola: Periodically inspect the rubber pad for signs of wear, cracking, or excessive smoothness. A worn pad can reduce grip and potentially affect pedal feel.
- Čištění: If the pad becomes dirty, clean it with a damp cloth and mild soap. Avoid harsh chemicals that could degrade the rubber material.
- Nahrazení: Replace the pad if it shows significant signs of wear or damage to ensure optimal safety and performance.
5. Řešení problémů
Most issues related to the pedal pad are due to improper installation or natural wear over time.
| Problém | Možná příčina | Řešení |
|---|---|---|
| Pad feels loose or slips | Not fully seated during installation; incorrect part for vehicle; worn out pad. | Re-install, ensuring all edges are securely wrapped around the pedal arm. Verify part compatibility. Replace if worn. |
| Reduced grip on pedal | Pad surface is worn smooth; presence of oil/grease on pad. | Clean the pad surface. Replace the pad if the texture is significantly worn. |
6. Záruka a podpora
As a genuine BMW part, this product is manufactured to the highest standards. For specific warranty information, please refer to the documentation provided with your purchase or contact an authorized BMW dealership or service center.
For technical assistance or inquiries regarding this genuine part, it is recommended to contact your local authorized BMW service center or visit the official BMW webmísto pro zdroje podpory.
Image: The official BMW logo, representing the brand's commitment to quality and genuine parts.
