CLOVER D1-K

CLOVER D1-K Hot and Cold Countertop Bottleless Water Cooler Instruction Manual

Zavedení

Thank you for choosing the CLOVER D1-K Hot and Cold Countertop Bottleless Water Cooler. This manual provides essential information for the safe and efficient operation, installation, and maintenance of your new water dispenser. Please read all instructions carefully before use and retain this manual for future reference.

Důležité bezpečnostní informace

Při používání elektrických spotřebičů vždy dodržujte základní bezpečnostní opatření, abyste snížili riziko požáru, úrazu elektrickým proudem a zranění osob.

Obsah balení

Your CLOVER D1-K water cooler package includes:

Specifikace

ModelD1-K
Typ produktuHot and Cold Countertop Bottleless Water Dispenser
Rozměry produktu10.7 cm Š x 16.8 cm H x 17.2 cm V
Hmotnost produktuNet: 26 lbs, Gross: 31 lbs
Barva produktuČerná a stříbrná
Elektrický110V zásuvka
Typ chladivaR134a
Typ kompresoruLG
CertifikaceUL
Teplota vodyHorké a studené
Cold Water Rate0.6 GAL of 50°F/HR
Hot Water Rate1.8 GAL of 185°F/HR
Cold Water ThermostatNastavitelná od 32°F do 50°F
Termostat teplé vodyControlled to 185°F
Built-In Filtration SystemAno
Životnost filtru750 gallons or 12 months
Hodnocení Energy StarAno

Nastavení

1. Umístění

Place the water cooler on a flat, stable countertop. Ensure there is at least 4 inches of clearance from walls to allow for proper ventilation and efficient operation. The unit dimensions are 10.7"W x 16.8"D x 17.2"H, designed to fit under standard cabinets.

Clover D1-K Water Cooler with dimensions labeled
Figure 1: CLOVER D1-K Water Cooler with labeled dimensions (10.7"W x 16.8"D x 17.2"H).

2. Připojení vodovodního potrubí

This bottleless water cooler connects directly to your existing plumbing. The package includes all necessary installation hardware and water line for a basic setup. Follow the detailed instructions provided with the installation kit to connect the water line to a cold water source.

Vnitřní view of the Clover D1-K water cooler showing tanks and filtration system
Figure 2: Internal components of the CLOVER D1-K, including stainless steel tanks and filter housing.

3. Initial System Flush

Before first use, it is crucial to flush the system to remove any air or carbon fines from the new filter. Once the water line is connected and the water supply is turned on, dispense several cups of water from both the hot and cold faucets until the water runs clear and free of air bubbles. This ensures optimal water quality and taste.

Návod k obsluze

1. Výdej vody

The CLOVER D1-K features easy-to-use push faucets for dispensing water. The unit provides both hot and cold water.

Přední view of the Clover D1-K water cooler with hot and cold water faucets
Obrázek 3: Přední strana view of the CLOVER D1-K, highlighting the hot and cold water dispensing areas and the hot water safety lock.

2. Fast Fill Rate

The dispenser offers a fast fill rate, capable of dispensing 16 oz in under 8 seconds. The deep fill area accommodates large sport bottles and containers.

Údržba

1. Čištění

The CLOVER D1-K water dispenser requires minimal maintenance. The removable drip tray is made of ABS plastic and is dishwasher safe for easy cleaning. Regularly wipe down the exterior with a soft, damp tkanina.

2. Výměna filtru

The built-in filtration system ensures clean, fresh water. The filter cartridge (2H-L) has a life of approximately 750 gallons or 12 months, whichever comes first. Refer to the filter replacement instructions provided with your replacement filter for detailed steps.

Odstraňování problémů

If you experience issues with your CLOVER D1-K water cooler, please consult the following common problems and solutions:

Záruka

The CLOVER D1-K Hot and Cold Countertop Bottleless Water Cooler comes with a 1 roky záruka na díly a a 3letá záruka na kompresor od data nákupu. Uschovejte si doklad o koupi pro případné reklamace. Tato záruka se vztahuje na vady materiálu a zpracování při běžném používání.

Podpora

For further assistance, technical support, or to inquire about replacement parts, please contact CLOVER customer service. Refer to the contact information provided on the product packaging or the official CLOVER webmísto.

Související dokumenty - D1-K

Předview Průvodce pokladním systémem Clover: Softwarové plány, nastavení a řešení problémů
Komplexní průvodce pokladními systémy Clover, který zahrnuje podrobnosti o softwarovém plánu, nastavení zařízení, integraci aplikací třetích stran, řešení běžných problémů a správu obchodních operací.
Předview Implementační manuál Clover P2PE v5.0: Průvodce zabezpečeným zpracováním plateb
Tato příručka obsahuje podrobné pokyny k implementaci řešení Clover Point-to-Point Encryption (P2PE). Seznamte se se schválenými zařízeními, instalací, bezpečnostními protokoly a řešením problémů s platebními terminály Clover.
Předview Manuál implementace Clover P2PE: Nastavení a zabezpečení zabezpečených platebních zařízení
Tato příručka poskytuje podrobné pokyny k implementaci řešení P2PE (Point-to-Point Encryption) od společnosti Clover, které zahrnují nastavení zařízení, bezpečnostní protokoly a řešení problémů s platebními terminály Clover.
Předview Implementační manuál Clover P2PE: Průvodce zabezpečeným zpracováním plateb
Tato příručka podrobně popisuje implementaci šifrování P2PE (Point-to-Point Encryption) pro zařízení Clover Mobile, Mini a Flex a zahrnuje nastavení, zabezpečení a shodu s PCI pro bezpečné platební transakce.
Předview Průvodce instalací Clover Mobile: Nastavení, aktivace a transakce
Komplexní průvodce nastavením, aktivací a používáním zařízení Clover Mobile pro zpracování plateb. Zahrnuje nastavení hardwaru, síťové připojení, instalaci aplikací, správu PINů, párování tiskáren a zpracování transakcí.
Předview Specifikace a funkce pokladního systému Clover Mini 3
Podrobné specifikace a funkce Clover Mini 3, kompaktního stolního chytrého pokladního systému. Zahrnuje srovnání s Clover Mini 2, možnosti připojení, příslušenství a platební proces.