YSI 251398Y

Uživatelská příručka k práškovému činidlu pro stanovení volného chloru YSI 251398Y DPD

Model: 251398Y

Konec produktuview

The YSI 251398Y DPD Free Chlorine Reagent Powder is designed for accurate measurement of free chlorine in water samples using a compatible colorimeter. Each pack contains 100 individual powder packs, with each pack formulated for a 5ml sample volume and capable of measuring free chlorine in the range of 0 to 3.5 mg/L.

This reagent utilizes the DPD (N,N-Diethyl-p-phenylenediamine) method, which reacts with free chlorine to produce a magenta color, the intensity of which is proportional to the chlorine concentration and measured by a colorimeter.

Bezpečnostní informace

Always handle chemical reagents with care. Read the Safety Data Sheet (SDS) for this product before use. Wear appropriate personal protective equipment (PPE), including safety glasses and gloves, when handling the reagent powder. Avoid ingestion and contact with skin or eyes. In case of contact, rinse thoroughly with water and seek medical attention if irritation persists.

Nastavení a příprava

Before beginning any measurements, ensure you have the following:

  • YSI 251398Y DPD Free Chlorine Reagent Powder pack
  • Compatible colorimeter or spectrophotometer
  • Čisté sample cells/vials
  • Deionized or distilled water for blanks and dilutions (if necessary)
  • Voda sample to be tested
  • Časovač

Kroky přípravy:

  1. Ensure all glassware and sample cells are clean and free from contamination. Rinse with deionized water before use.
  2. Calibrate your colorimeter according to its specific instruction manual before use.

Návod k obsluze

Follow these steps to accurately measure free chlorine using the YSI 251398Y DPD Free Chlorine Reagent Powder:

  1. Sampkolekce le: Nasbírejte čerstvou voduample in a clean sample cell. The required volume is 5ml. Ensure the sample is representative of the water being tested.
  2. Add Reagent: Carefully tear open one YSI 251398Y DPD Free Chlorine Reagent Powder pack. Add the entire contents of the powder pack to the 5ml water sample v sample buňka.
  3. Směs: Uzávěr sample cell and invert several times to thoroughly mix the reagent with the sample. Ensure all powder dissolves completely. A magenta color will develop if free chlorine is present.
  4. Doba reakce: Allow a reaction time of 1 minute for the color to fully develop. Do not exceed 6 minutes, as color fading may occur, leading to inaccurate results.
  5. Měření: Insert the prepared sample cell into your calibrated colorimeter. Follow your colorimeter's instructions to initiate the measurement. The colorimeter will display the free chlorine concentration in mg/L.
  6. Record Results: Record the measured free chlorine concentration.
Close-up of a silver foil reagent powder packet with 'VARIO.LIT Chlorine FREE-DPD' printed on it.

Image: A single YSI DPD Free Chlorine Reagent Powder packet. This silver foil packet contains the pre-measured reagent powder for a single test. The text "VARIO.LIT Chlorine FREE-DPD" is visible on the packet, indicating its contents and purpose.

Údržba a skladování

Proper storage and handling are crucial for maintaining the integrity and effectiveness of the reagent powder:

  • Skladování: Store the reagent powder packs in their original packaging in a cool, dry place, away from direct sunlight and extreme temperatures. Do not store near strong acids or bases.
  • Doba použitelnosti: Refer to the expiration date printed on the packaging. Do not use expired reagents, as they may yield inaccurate results.
  • Likvidace: Dispose of used reagent and sample solutions according to local environmental regulations. Consult your local authorities for proper chemical waste disposal procedures.
  • Čistota: Always ensure sample cells and equipment are thoroughly cleaned after each use to prevent cross-contamination.

Odstraňování problémů

If you encounter issues during testing, consider the following common problems and solutions:

ProblémMožná příčinaŘešení
No color developmentNo free chlorine present; Expired reagent; Incorrect sampobjem.Verify sample contains chlorine; Check reagent expiration date; Ensure 5ml sampobjem.
Fading color or inaccurate readingReaction time exceeded; Contaminated sample cell; Turbidity in sample.Adhere strictly to 1-minute reaction time; Clean sample cells thoroughly; Filter turbid sampv případě potřeby.
Nekonzistentní výsledkyImproper mixing; Temperature variations; Colorimeter not calibrated.Ensure complete dissolution of powder; Perform tests at consistent temperatures; Recalibrate colorimeter.

Specifikace

  • Název produktu: YSI DPD Free Chlorine Reagent Powder
  • Číslo modelu: 251398Y
  • Reagent Type: DPD (N,N-Diethyl-p-phenylenediamine)
  • Analyte: Volný chlór (Cl2)
  • Sample objem: 5 ml
  • Rozsah měření: 0 až 3.5 mg/l (ppm)
  • Obal: Powder packs, 100 per pack
  • Výrobce: YSI
  • ASIN: B00CMX0PDK
  • Rozměry balení: 8.1 x 6.9 x 1.2 palce
  • Hmotnost položky: 3.2 unce

Záruka a podpora

For information regarding product warranty, technical support, or to purchase additional reagents, please contact YSI customer service or visit the official YSI website. Refer to your purchase documentation for specific warranty terms and conditions.

YSI Contact Information:

  • Webmísto: www.ysi.com (Please note: This is a placeholder link, refer to official YSI documentation for exact contact details.)

Související dokumenty - 251398Y

Předview Návod k obsluze měřiče vodivosti YSI Model 32
Návod k obsluze pro měřič vodivosti YSI Model 32 s podrobným popisem jeho obecného popisu, specifikací, provozních postupů, údržby a kalibrace.
Předview Stručný návod k obsluze YSI Pro20/Pro20i: Kalibrace a provoz
Concise guide for calibrating and operating the YSI Pro20/Pro20i dissolved oxygen meters, covering membrane installation, sensor setup, barometer and DO calibration, salinity compensation, and measurement taking. Includes essential operational steps and contact information.
Předview Bezpečnostní list (SDS) pufrovacího roztoku YSI 3821 o pH 4.00
Komplexní bezpečnostní list (SDS) pro pufrovací roztok YSI 3821 o pH 4.00, s podrobnými informacemi o identifikaci produktu, nebezpečích, složení, první pomoci, manipulaci, skladování a regulačních informacích.
Předview YSI EcoSense DO200A/DO200M Dissolved Oxygen and Temperature Instruments User Manual
This user manual provides comprehensive instructions for operating, installing, maintaining, and troubleshooting the YSI EcoSense DO200A and DO200M dissolved oxygen and temperature instruments. It includes details on specifications, accessories, and warranty information.
Předview Manuál pro provoz a údržbu satelitního vysílače YSIT-1
Komplexní uživatelská příručka pro satelitní vysílač YSI model YSIT-1, která popisuje jeho provoz, údržbu, nastavení hardwaru a referenci sériových příkazů. Podrobnosti zahrnují správu času, ukládání dat, formátování dat GOES, ovládání RF vysílače a synchronizaci GPS.
Předview YSI IQ Sensor Net MIQ/CHV PLUS Návod k obsluze
Tato provozní příručka obsahuje podrobné pokyny pro ventilový modul YSI IQ Sensor Net MIQ/CHV PLUS, které zahrnují instalaci, nastavení, údržbu a bezpečnostní pokyny pro čisticí hlavy senzorů poháněné stlačeným vzduchem.