Případ 320

Servisní manuál k traktoru a nakladači Case 320

Essential guide for maintenance, repair, and diagnostics.

1. Úvod

This service manual provides detailed information for the maintenance, repair, and troubleshooting of the Case 320 Tractor Loader Backhoe (TLB). It is intended for qualified service personnel and technicians. Adherence to the procedures outlined in this manual is crucial for ensuring the safe and efficient operation and longevity of the equipment.

The manual is organized into sections covering various aspects of the TLB, including safety, component descriptions, preventative maintenance schedules, diagnostic procedures, and technical specifications. Always refer to the latest version of this manual for the most accurate information.

2. Bezpečnostní informace

Safety is paramount when working with heavy machinery. Always observe the following general safety precautions to prevent injury to personnel or damage to the equipment.

  • Přečtěte si a pochopte: Before performing any service or maintenance, thoroughly read and understand all instructions and warnings in this manual and on the machine itself.
  • Osobní ochranné prostředky (OOP): Vždy používejte vhodné osobní ochranné prostředky, včetně ochranných brýlí, rukavic, přilby a bot s ocelovou špičkou.
  • Uzamčení/Tagven: Ensure the machine is properly shut down, parked on level ground, and all attachments are lowered. Disconnect the battery and apply lockout/tagout procedures before working on electrical systems or moving parts.
  • Hydraulický tlak: Relieve all hydraulic pressure before disconnecting hydraulic lines or components. Hydraulic fluid under pressure can cause severe injury.
  • Hot Surfaces/Fluids: Be aware of hot engine components, exhaust systems, and fluids (oil, coolant) which can cause burns. Allow the machine to cool before servicing.
  • Správné nástroje: Use only the correct tools for the job. Ensure tools are in good condition.
  • Čistota: Keep the work area clean and free of clutter. Spills can lead to slips and falls.

3. Komponenta přesview

The Case 320 TLB is comprised of several key systems working in conjunction. Understanding the basic function and location of these components is essential for effective servicing.

Cover of a J.I. Case Service Manual for various tractor, crawler, forklift, and TLB models, including 210B, 310, 430, and 530 series.

Figure 3.1: Representative cover of a J.I. Case Service Manual. While this specific cover details models such as 210B, 310, 430, and 530 series, it illustrates the typical format and appearance of service documentation for Case heavy equipment. This manual provides comprehensive service information for the Case 320 Tractor Loader Backhoe.

  • Systém motoru: Powers the machine and its hydraulic systems. Includes fuel, cooling, lubrication, and exhaust sub-systems.
  • Hydraulický systém: Provides power for the loader, backhoe, steering, and other hydraulic functions. Consists of pumps, valves, cylinders, and reservoirs.
  • Hnací ústrojí: Transmits power from the engine to the wheels, including the transmission, axles, and differential.
  • Loader Assembly: Front-mounted attachment for digging, lifting, and carrying materials.
  • Backhoe Assembly: Rear-mounted attachment for excavation and trenching.
  • Elektrický systém: Controls engine starting, lighting, instrumentation, and various electronic components.

4. Preventivní údržba

Regular preventative maintenance is critical for the reliable operation and extended lifespan of your Case 320 TLB. Follow the recommended service intervals and procedures.

4.1 Daily Checks (Before Operation)

  • Zkontrolujte hladinu motorového oleje.
  • Zkontrolujte hladinu chladicí kapaliny.
  • Zkontrolujte hladinu hydraulické kapaliny.
  • Zkontrolujte tlak a stav pneumatik.
  • Inspect all hoses and lines for leaks or damage.
  • Test all lights, gauges, and safety devices.
  • Clean windows and mirrors.

4.2 Scheduled Maintenance (Every 250 Hours / Monthly)

  • Vyměňte motorový olej a filtr.
  • Inspect air filter elements.
  • Lubricate all grease points on loader and backhoe linkages.
  • Zkontrolujte hladinu elektrolytu v baterii a svorky.
  • Zkontrolujte napnutí a stav řemene ventilátoru.

4.3 Scheduled Maintenance (Every 500 Hours / Quarterly)

  • Replace fuel filters.
  • Change hydraulic filter.
  • Inspect and adjust brake pedal free play.
  • Check transmission fluid level and condition.

Refer to the detailed maintenance schedule within the full service manual for comprehensive instructions and additional intervals.

5. Troubleshooting & Diagnostics

This section provides a guide to common issues that may arise with the Case 320 TLB and outlines basic diagnostic steps. For complex problems, consult a qualified technician or the detailed diagnostic charts in the complete service manual.

PříznakMožná příčinaNápravné opatření
Motor se nespustíNízké nabití baterie, problém s palivovým systémem, porucha startéru.Check battery connections and charge, verify fuel supply, inspect starter.
Ztráta hydraulického výkonuLow hydraulic fluid, clogged filter, faulty pump, relief valve issue.Check fluid level, replace filter, inspect pump/valves.
Přehřívání motoruLow coolant, clogged radiator, faulty thermostat, fan belt issue.Check coolant, clean radiator, test thermostat, inspect fan belt.
Špatný brzdný výkonOpotřebované brzdové destičky, vzduch v hydraulickém potrubí, nízká hladina brzdové kapaliny.Inspect pads, bleed brake system, check fluid level.

6. Technické specifikace

The following are general technical specifications for the Case 320 Tractor Loader Backhoe. Specific values may vary based on configuration and year of manufacture. Always refer to the machine's data plate for precise information.

  • Typ motoru: Diesel, 4-cylinder (Specific model details in full manual)
  • Provozní hmotnost: Přibližně 3 300 - 3 700 liber (1 497 - 1 678 kg)
  • Loader Bucket Capacity: 0.75 - 1.0 cu yd (0.57 - 0.76 cu m)
  • Backhoe Digging Depth: 14 - 16 stop (4.2 - 4.8 m)
  • Kapacita palivové nádrže: Approximately 30 - 40 US gallons (113 - 151 liters)
  • Kapacita hydraulického systému: Approximately 20 - 25 US gallons (75 - 95 liters)

7. Support & Ordering Information

For additional support, genuine replacement parts, or to order supplementary manuals, please contact the publisher or an authorized Case dealer.

This manual is published by Jensales. When ordering parts, always provide the full model number and serial number of your Case 320 TLB to ensure compatibility.

Note: This document is a general guide. For comprehensive repair procedures, detailed schematics, and specific part numbers, refer to the complete official Case 320 Service Manual.

Související dokumenty - 320

Předview Návod k obsluze rypadlo-nakladače CASE 580E a 580S Construction King | JI Case
Komplexní návod k obsluze pro rypadlo-nakladače CASE 580E a 580S Construction King. Zahrnuje bezpečnost, provoz, údržbu a specifikace. Poskytovatel: JI Case.
Předview Servisní manuál k rypadlu-nakladači Case 580 Super E
Komplexní servisní příručka pro rypadlo-nakladač Case 580 Super E, která zahrnuje údržbu, řešení problémů a specifikace všech hlavních systémů včetně motoru, paliva, elektroinstalace, brzd, hydrauliky a hnacího ústrojí.
Předview Radlice buldozeru CASE CX80C – specifikace a výkon
Podrobné specifikace, výkonnostní údaje a nosnosti pro rypadlo CASE CX80C s buldozerovou radlicí, certifikované pro Tier 4 Final. Zahrnuje motor, hnací ústrojí, hydrauliku, prostředí obsluhy, rozměry a podrobnosti o vybavení.
Předview Hydraulické rypadlo CASE CX80: Specifikace a vlastnosti
Prozkoumejte hydraulické rypadlo CASE CX80, výkonný a všestranný stroj určený pro různé stavební a terénní práce. Tento dokument podrobně popisuje jeho motor, hydraulický systém, pohodlí kabiny, podvozek, příslušenství, výkonnostní údaje, rozměry a standardní/volitelné vybavení.
Předview Specifikace a údaje o kloubovém kolovém nakladači CASE 621D/XT/XR
Podrobné specifikace, rozměry, výkonnostní údaje a informace o vybavení pro kloubové kolové nakladače CASE 621D, 621XT a 621XR.
Předview Kompaktní pásový nakladač CASE TV450B - Specifikace Tier 4 Final
Podrobné specifikace kompaktního pásového nakladače CASE TV450B, včetně motoru, hnacího ústrojí, hydrauliky, rozměrů, kapacit a výkonnostních údajů. Certifikace Tier 4 Final.