Master MH-135T-KFA Kerosene Forced Air Heater User Manual

Zavedení

Děkuji za nákupasing the Master MH-135T-KFA Kerosene Forced Air Heater. This manual provides important information for the safe operation, maintenance, and troubleshooting of your heater. Please read this manual thoroughly before operating the unit and keep it for future reference.

Figure 1: Master MH-135T-KFA Kerosene Forced Air Heater. This image shows the complete heater unit, featuring its yellow cylindrical body, black fuel tank base, and sturdy black handles and wheels for portability. The front of the heater emits a warm glow, indicating its heating function.

Důležité bezpečnostní informace

Při používání elektrických spotřebičů vždy dodržujte základní bezpečnostní opatření, abyste snížili riziko požáru, úrazu elektrickým proudem a zranění osob.

• Přečtěte si všechny pokyny before using this heater.
• Zajistěte řádné větrání, abyste zabránili otravě oxidem uhelnatým.
• Do not use this heater in residential living areas. It is designed for industrial and outdoor use.
• Keep combustible materials at least 8 feet (2.4 meters) from the front of the heater and 3 feet (0.9 meters) from the sides and top.
• Use only kerosene, JP8, Jet A fuel, 1 and 2 fuel oil, or 1 and 2 diesel as fuel. Do not use gasoline or other volatile fuels.
• Always unplug the heater when not in use or before servicing.
• Nepoužívejte ohřívač, pokud upadl nebo je jakkoli poškozen.
• This heater is equipped with an automatic safety shut-off system. Do not bypass or modify this feature.

Konec produktuview

The Master MH-135T-KFA is a portable kerosene forced air heater designed for heating large spaces such as garages, workshops, construction sites, warehouses, and aircraft hangers. It features a robust design with integrated wheels and handles for easy transport.

Klíčové vlastnosti:

• Výstup BTU: 135,000 XNUMX BTU
• Topná plocha: Až 3375 XNUMX čtverečních stop
• Typ paliva: Multi-fuel (Kerosene, JP8, Jet A fuel, 1 & 2 fuel oil, 1 & 2 diesel)
• Kapacita palivové nádrže: 10 galonů
• Provozní doba: Approximately 10 hours on a full tank
• Termostat: Built-in for temperature control
• Bezpečnost: Automatic safety shut-off system
• Přenosnost: Integrated wheel and handle kits with heavy-duty pneumatic tires
• Diagnostika: Digital temperature readout and LED diagnostics

Obrázek 2: Detail view of the heater's control panel and fuel tank. This image highlights the control knob, digital display, and various warning labels on the black fuel tank, indicating the heater's operational interface and safety information.

Nastavení a montáž

The Master MH-135T-KFA heater requires some assembly before first use. Follow these steps carefully:

1. Rozbalení: Opatrně vyjměte všechny součásti z obalu. Zkontrolujte, zda nedošlo k poškození při přepravě.
2. Wheel and Handle Installation: Attach the heavy-duty pneumatic wheels and handles to the heater frame using the provided hardware. Ensure all bolts are securely tightened.
3. Umístění: Position the heater on a level, non-combustible surface. Ensure adequate clearance from walls, ceilings, and combustible materials as specified in the safety section.
4. Tankování: Fill the 10-gallon fuel tank with clean kerosene, JP8, Jet A fuel, 1 and 2 fuel oil, or 1 and 2 diesel. Do not overfill. Always refuel outdoors and away from ignition sources.
5. Připojení napájení: Connect the heater to a grounded electrical outlet using the integrated extension cord wrap. Ensure the power supply matches the heater's requirements.

Obrázek 3: Strana view of the heater showing the robust handles and pneumatic wheels. This image emphasizes the heater's design for easy transport, highlighting the durable wheels and the handle extending from the main body.

Návod k obsluze

Spuštění ohřívače:

1. Ensure the heater is properly fueled and connected to a power source.
2. Turn the Power On/Off switch to the "ON" position.
3. Set the thermostat to the desired temperature. The heater will automatically ignite and begin heating.
4. Monitor the digital temperature readout and LED diagnostics for operational status.

Vypnutí ohřívače:

1. Turn the Power On/Off switch to the "OFF" position.
2. Před přemístěním nebo uskladněním nechte ohřívač zcela vychladnout.
3. Odpojte ohřívač ze zásuvky.

Ukazatel paliva:

The built-in fuel gauge provides an indication of the remaining fuel level in the tank. Refuel when the gauge indicates low fuel to ensure continuous operation.

Údržba

Regular maintenance ensures the longevity and safe operation of your Master MH-135T-KFA heater. Always unplug the heater before performing any maintenance.

• Čištění: Keep the heater clean and free from dust and debris. Use a soft, dry cloth for exterior cleaning.
• Palivový filtr: Periodically inspect and clean or replace the fuel filter to ensure proper fuel flow.
• Tryska: Check the burner nozzle for clogs or damage. Clean or replace as necessary.
• Air Pressure Gauge: Ensure the built-in calibrated air pressure gauge is functioning correctly.
• Skladování: When storing the heater for extended periods, drain the fuel tank and store in a dry, safe location.

Odstraňování problémů

Pokud problém přetrvává i po vyzkoušení těchto řešení, obraťte se na kvalifikovaný servisní personál.

Specifikace

Informace o záruce

The Master MH-135T-KFA Kerosene Forced Air Heater comes with a 1letá omezená záruka from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, abuse, accident, unauthorized repairs, or lack of proper maintenance.

For warranty claims or service, please contact Master customer support with your proof of purchase.