Dometic 3314082.000

Dometic 3314082.000 Duo Therm Comfort Control 2 CCC2 Black Instruction Manual

Model: 3314082.000 | Značka: Dometic

1. Úvod

The Dometic Duo Therm Comfort Control 2 (CCC2) is an advanced thermostat designed for precise climate control in recreational vehicles (RVs). This unit allows for accurate temperature management and can control up to four zones independently, providing optimal comfort. Featuring a large, easy-to-read SMX blue light display and built-in error codes for simplified diagnostics, the CCC2 enhances your RV living experience.

Dometic Duo Therm Comfort Control 2 CCC2 Black unit

Image 1.1: The Dometic Duo Therm Comfort Control 2 (CCC2) in black, a programmable thermostat for RV HVAC systems.

2. Bezpečnostní informace

Please read all safety instructions carefully before installation and operation. Failure to follow these instructions could result in property damage, personal injury, or death.

  • Always disconnect power to the RV's HVAC system before performing any installation or maintenance.
  • Pokud si nejste jisti některými kroky, měl by instalaci provést kvalifikovaný technik.
  • Ujistěte se, že všechna elektroinstalace jsou bezpečná a splňují místní elektrotechnické předpisy.
  • Do not expose the control unit to water or excessive moisture.
  • Keep children away from the control unit during operation and maintenance.

3. Obsah balení

Ověřte, zda jsou v balení přítomny všechny položky:

  • 1 x Dometic Duo Therm Comfort Control 2 (CCC2) Thermostat Unit
  • 1 x Installation and Operation Manual (this document)
  • Montážní materiál (šrouby, hmoždinky)

Note: Additional components such as the air distribution box or specific wiring harnesses for your RV's HVAC system are sold separately and are required for a complete installation.

4. Instalace

This section provides general guidelines for installing the Dometic CCC2 thermostat. Specific wiring and mounting procedures may vary based on your RV model and existing HVAC system. Consult your RV's manufacturer manual for detailed wiring diagrams.

4.1. Místo montáže

  • Choose a central location on an interior wall, away from direct sunlight, heat sources, or drafts, to ensure accurate temperature readings.
  • Ensure there is sufficient space for wiring access behind the thermostat.

4.2. Připojení vodičů

The CCC2 thermostat typically connects to your RV's HVAC system via a multi-conductor cable. The back of the unit features a phone-jack style connector (RJ11 or similar) for communication with the main control board of your Dometic HVAC system.

  1. Odpojení napájení: Turn off all power to the RV's HVAC system at the circuit breaker or fuse panel.
  2. Odstraňte starý termostat: Carefully remove your existing thermostat from the wall. Disconnect any wiring, noting the color and terminal connections for reference.
  3. Mounting the CCC2: Secure the CCC2 mounting plate to the wall using the provided screws and anchors. Ensure the plate is level.
  4. Připojení kabeláže: Connect the multi-conductor cable from your HVAC system to the phone-jack style port on the back of the CCC2 unit. Ensure the connection is firm and secure.
  5. Připojení termostatu: Snap or screw the CCC2 thermostat unit onto its mounting plate.
  6. Obnovit napájení: Restore power to the RV's HVAC system. The thermostat display should illuminate.

If your RV's wiring does not have a compatible phone-jack style connector, an adapter or professional installation may be required. Refer to the Dometic service manual for detailed wiring diagrams specific to your HVAC system.

5. Nastavení a konfigurace

Upon initial power-up or after a power interruption, the CCC2 may require basic setup. The large SMX blue light display will guide you through the process.

  • Počáteční spuštění: The display will show a startup sequence.
  • Výběr zóny: If your system supports multiple zones, you may be prompted to select or configure zones. The CCC2 can control up to four zones independently.
  • Výběr režimu: Choose your desired operating mode (e.g., Cool, Heat, Fan, Auto).
  • Nastavení teploty: Use the touch controls to set your desired temperature.

6. Návod k obsluze

The Dometic CCC2 features intuitive touch controls and a clear LCD display for easy operation.

6.1. Základní obsluha

  • Zapnutí/vypnutí: Stisknutím tlačítka Napájení zapněte nebo vypněte jednotku.
  • Výběr režimu: Press the Mode button to cycle through available modes: Cool, Heat, Fan, Auto, Off.
  • Nastavení teploty: Use the Up/Down arrows on the touch screen to adjust the set temperature.
  • Rychlost ventilátoru: In Fan or Cool/Heat modes, press the Fan button to cycle through fan speeds (Low, Medium, High, Auto).

6.2. Zone Control

If your RV has multiple HVAC zones, the CCC2 allows individual control:

  • Press the Zone button to select the zone you wish to control. The active zone will be indicated on the display.
  • Adjust the mode, temperature, and fan speed for the selected zone as desired.

6.3. Programmable Features

The CCC2 is a programmable thermostat, allowing you to set schedules for temperature changes throughout the day or week. Consult the detailed user manual for programming instructions.

7. Údržba

Regular maintenance ensures optimal performance and longevity of your Dometic CCC2 thermostat.

  • Čištění: Wipe the display and exterior with a soft, damp tkanina. Nepoužívejte abrazivní čisticí prostředky nebo rozpouštědla.
  • Vzdálenost senzoru: Ensure the temperature sensor (usually a small opening on the unit) is free from dust and obstructions for accurate readings.
  • Systémové kontroly: Periodically check your entire RV HVAC system, including air filters and outdoor units, as recommended by their respective manufacturers.

8. Řešení problémů

The Dometic CCC2 is equipped with built-in error codes to assist in diagnosing issues. If a problem occurs, an error code may appear on the display.

ProblémMožná příčinaŘešení
Displej je prázdnýJednotka není napájena.Check RV circuit breakers/fuses. Ensure all wiring connections are secure.
Nesprávný údaj o teplotěSensor obstructed or located near heat/cold source.Clear any obstructions from the sensor. Relocate thermostat if necessary (professional assistance recommended).
HVAC system not respondingCommunication error or system fault.Check for error codes on the display and consult the full Dometic service manual for specific code meanings. Verify cable connections.
Zone control issuesIncorrect zone configuration or wiring.Review zone setup in the thermostat menu. Inspect wiring to individual zone components.

For persistent issues or specific error codes, contact Dometic customer support or a certified RV technician. The built-in error codes are designed to assist factory or dealer assistance.

9. Specifikace

FunkceDetail
ZnačkaDometic
Číslo modelu3314082.000 (také známý jako 3312024.000)
Typ ovladačeDotykové ovládání
Speciální funkceLight Display (SMX blue light)
BarvaČerný
Specifická použitíHVAC Systems (RV applications)
Typ řízení teplotyProgramovatelné
Technologie připojeníWired (RJ11-style connection)
Zdroj napájeníElektrický kabel (24 V)
Hmotnost položky0.01 uncí
Rozměry produktu7.8 x 0.6 x 2.5 palce
Typ zobrazeníLCD
Typ montážeDržák na zeď
PodsvíceníAno

10. Záruka a podpora

For warranty information, technical support, or to purchase replacement parts, please contact Dometic customer service directly. Keep your purchase receipt and product model number handy when contacting support.

  • Dometic Webmísto: www.dometic.com
  • Služby zákazníkům: Refer to the Dometic webstránky s regionálními kontaktními informacemi.