Uživatelská příručka k síťovému telefonnímu vstupnímu ovladači Keri Systems EGP-5000HF Entraguard

Model: EGP-5000HF

1. Úvod

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Keri Systems EGP-5000HF Entraguard Networkable Telephone Entry Controller. Please read this manual thoroughly before attempting to install or operate the unit to ensure proper functionality and safety.

2. Konec produktuview

The Keri Systems EGP-5000HF is a sophisticated networkable telephone entry controller designed for managing access to residential or commercial properties. It features a large font graphics display and supports up to 5000 tenants, offering a robust solution for secure entry management.

Keri Systems EGP-5000HF Entraguard Networkable Telephone Entry Controller with a hand pressing a button on the keypad.

Obrázek 2.1: Keri Systems EGP-5000HF Entraguard Unit. This image displays the Keri Systems EGP-5000HF Entraguard unit. It features a stainless steel enclosure, a large display screen showing a directory of names, a numeric keypad, and two speaker grilles at the bottom. A hand is shown pressing the '9' key on the keypad. The display shows names like 'Jacobson Sam', 'Jameson Mark', 'Kent Joe', 'Liu Leo', 'Martinez Tony', 'Magon Michael', 'McDonald Nancy', 'Nixon Nancy', and 'Peterson Mary'.

Klíčové vlastnosti:

Networkable for remote management and integration.
Large font graphics display for clear visibility.
Capacity for up to 5000 tenants.
Integrated keypad for direct dialing and access codes.
Durable construction suitable for various environments.

3. Nastavení a instalace

Installation of the EGP-5000HF unit should be performed by qualified personnel. Incorrect installation can lead to malfunction or damage. Refer to the detailed installation guide provided separately for specific wiring diagrams and mounting instructions.

Obecné kroky:

Montáž: Securely mount the unit in the desired location, ensuring it is protected from extreme weather conditions and vandalism.
Zapojení: Connect power, telephone lines, and network cables according to the provided wiring diagrams. Ensure all connections are secure and properly insulated.
Zapnutí: Once all connections are verified, apply power to the unit. The display should illuminate, indicating successful power-up.
Počáteční konfigurace: Access the unit's programming interface via the keypad or network connection to perform initial setup, including network settings, date/time, and administrator passwords.

4. Návod k obsluze

The EGP-5000HF offers multiple ways for visitors and tenants to interact with the system.

4.1. Calling a Tenant:

Using the Directory: Use the up/down arrow keys (if available, or scroll through names on the display) to navigate the tenant directory. Once the desired tenant's name is highlighted, press the VOLÁNÍ button (or equivalent) to initiate a call.
Přímé vytáčení: If the tenant's directory code is known, enter the code using the numeric keypad and then press the VOLÁNÍ tlačítko.

4.2. Gaining Entry (Tenants):

Enter your personal access code using the numeric keypad.
The system will verify the code, and if valid, will activate the door strike or gate opener.

4.3. Help Function:

To access the help function, press the * key twice on the numeric keypad. The display will provide instructions or connect to a pre-programmed help line.

5. Údržba

Regular maintenance ensures the longevity and optimal performance of your EGP-5000HF unit.

Čištění: Periodically clean the display screen and keypad with a soft, damp hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla.
Inspekce: Regularly inspect the unit for any signs of physical damage, loose connections, or wear and tear.
Aktualizace softwaru: Check the Keri Systems website for available firmware updates to ensure your unit has the latest features and security enhancements. Follow the provided instructions for safe updating.
Záloha: Periodically back up the tenant database and system configurations to prevent data loss.

6. Řešení problémů

This section addresses common issues you might encounter with the EGP-5000HF unit.

Problém	Možná příčina	Řešení
Unit has no power/display is off.	Power supply disconnected or faulty.	Check power connections. Verify power outlet functionality. Contact a technician if power supply is suspected faulty.
Cannot make a call.	Telephone line issue or incorrect programming.	Verify telephone line connection. Check system programming for correct tenant numbers and call settings.
Access code not working.	Incorrect code entered or code expired/disabled.	Ensure the correct access code is being used. An administrator should verify the code's status in the system programming.
Problémy s připojením k síti.	Loose Ethernet cable, incorrect network settings, or network hardware failure.	Check Ethernet cable connection. Verify network settings (IP address, subnet mask, gateway). Consult network administrator.

If you encounter issues not listed here or require further assistance, please contact Keri Systems technical support.

7. Specifikace

Model: EGP-5000HF
Značka: Keri Systems
Typ: Networkable Telephone Entry Controller
Tenant Capacity: Až do 5000
Zobrazit: Large font graphics display
Konektivita: Network (Ethernet), Telephone Line
ASIN: B00C7VIXUY
Datum první dostupnosti: 13. srpna 2009

8. Záruka a podpora

For warranty information, please refer to the documentation included with your product or visit the official Keri Systems website. Keri Systems provides technical support for their products. For assistance, please contact Keri Systems customer service directly.

Výrobce: Keri Systems

Note: Specific warranty terms and support contact details may vary and are subject to change by the manufacturer.

	Uživatelská data dveří Keri Systems File Průvodce exportem/importem Tato příručka vysvětluje, jak používat uživatelská data File Funkce exportu/importu v softwaru pro řízení přístupu Keri Systems Doors. Zahrnuje povolení funkce, export uživatelských dat do souboru EUsers.txt, úpravu dat v souboru IUsers.txt a import aktualizovaných dat. file zpět do Doors, spolu s řešením běžných chyb importu.
	Instalační příručka pro 2D/4D kontrolér NXT Instalační příručka pro 2D/4D kontrolér Keri Systems NXT s podrobnými schématy zapojení, specifikacemi, definicemi LED diod, ochranou portů, izolačními relé, požadavky na napájení, možnostmi kabelů a postupy resetování kontroléru.
	Referenční průvodce produkty DoorKing: Systémy pro telefonní a videovstupní systémy a kontrolu přístupu A comprehensive guide to DoorKing's range of telephone entry, video entry, and access control systems. This document details various models including the 1802, 1808, 1810, 1812, 1816, 1819, 1833, 1834, 1835, 1837, 1838, and 2100 Series. It covers system features, connection options, expansion capabilities, accessories, and mounting kits, providing essential information for selecting and implementing DoorKing's security solutions.
	Uživatelská příručka TEC1ACL – Vybrané vstupní systémy, přístup pro návštěvníky a ovládání pomocí klávesnice Komplexní uživatelská příručka pro elektronické telefonní voliče Select Entry Systems řady TEC1ACL. Naučte se, jak spravovat přístup návštěvníků pomocí klávesnice, adresáře a funkcí zadávání PINu. Zahrnuje podrobné akce a výsledky na klávesnici.
	TEC1A Series User Guide - Select Engineered Systems Access Control Comprehensive user guide for the Select Engineered Systems TEC1A Series telephone entry panels. Learn how visitors can use the keypad for directory searches or PIN-based entry, understand the user interface, and review keypad actions and ordering information.
	Návod k instalaci převodníku sériového signálu na Wiegand CV-800SES Pokyny k instalaci převodníku Camden CV-800SES ze sériového na Wiegand s podrobným popisem jeho funkcí, specifikací a postupů připojení pro telefonní vstupní systémy SES, TEC/CAT a Viscount Elektra.

Keri Systems EGP-5000HF