LaMotte SL-26 DPD Chlorine Test Kit (Model 3308-01) Instruction Manual

Zavedení

This instruction manual provides detailed guidance for the proper use and maintenance of the LaMotte SL-26 DPD Chlorine Test Kit, Model 3308-01. This kit is designed for accurate measurement of free, total, and combined chlorine levels in water samples, with a measurement range of 0.2 to 3.0 ppm (parts per million) chlorine. Following these instructions will help ensure reliable test results.

Součásti sady

The LaMotte SL-26 DPD Chlorine Test Kit (Model 3308-01) includes the following items:

• DPD Free Chlorine TesTabs
• DPD Total Chlorine TesTabs
• Octa-Slide 2 Comparator
• Test Tubes with caps
• Návod k použití
• Odolné pouzdro na přenášení

Nastavení

Before beginning any tests, ensure your work area is clean and free from contaminants that could interfere with the test results. Gather all necessary kit components: the Octa-Slide 2 Comparator, DPD TesTabs (Free and Total Chlorine), and a clean water sample to be tested. Rinse the test tubes thoroughly with the water sample before use to prevent cross-contamination.

Návod k obsluze

Follow these steps carefully to measure chlorine levels in your water sample.

A. Free Chlorine Test

1. Fill Test Tube: Fill one test tube to the 10 mL line with the water sample být testován.
2. Add Reagent: Add one DPD Free Chlorine TesTab to the water sample in the test tube.
3. Dissolve Tablet: Cap the test tube and shake gently until the tablet is completely dissolved.
4. Počkejte: Wait for approximately 1 minute for the color to develop.
5. Compare Color: Insert the test tube into the left opening of the Octa-Slide 2 Comparator. Hold the comparator up to a light source (e.g., natural daylight) and compare the color of the sample with the color standards on the comparator.
6. Výsledek záznamu: Identify the closest color match and record the corresponding Free Chlorine concentration in ppm.

B. Total Chlorine Test

To measure Total Chlorine, use the same sample from the Free Chlorine test.

1. Add Reagent: To the same test tube used for the Free Chlorine test, add one DPD Total Chlorine TesTab.
2. Dissolve Tablet: Cap the test tube and shake gently until the tablet is completely dissolved.
3. Počkejte: Wait for approximately 2-3 minutes for the color to develop.
4. Compare Color: Insert the test tube into the left opening of the Octa-Slide 2 Comparator. Hold the comparator up to a light source and compare the color of the sample with the color standards.
5. Výsledek záznamu: Identify the closest color match and record the corresponding Total Chlorine concentration in ppm.

C. Combined Chlorine Calculation

Combined Chlorine is calculated by subtracting the Free Chlorine reading from the Total Chlorine reading.

Combined Chlorine (ppm) = Total Chlorine (ppm) - Free Chlorine (ppm)

Výsledky čtení

The Octa-Slide 2 Comparator features a series of color standards representing different chlorine concentrations. To read your results, hold the comparator so that natural light illuminates the color standards and your sample from above. Look down through the comparator and match the color of your treated water sample to the closest color standard. The number next to the matching color indicates the chlorine concentration in parts per million (ppm).

Údržba

• Čištění zkumavek: After each use, rinse test tubes thoroughly with clean water. Use a brush if necessary to remove any residue. Allow them to air dry completely before storing.
• Comparator Care: Keep the Octa-Slide 2 Comparator clean and free of scratches. Wipe with a soft, damp cloth if needed. Avoid abrasive cleaners.
• Skladování činidel: Store DPD TesTabs in their original blister packs in a cool, dry place away from direct sunlight. Ensure the packs are sealed until use to maintain reagent integrity.
• Skladování sady: Store the entire kit in its carrying case in a cool, dry environment to protect components from damage and degradation.

Odstraňování problémů

• No Color Development: Ensure the DPD TesTab was added and fully dissolved. Check the expiration date of the reagents. If expired, use fresh reagents.
• Faint or Unusual Color: This could indicate very low chlorine levels, expired reagents, or interference from other substances in the water. Ensure proper sample collection and reagent handling.
• Difficulty Matching Color: Ensure adequate lighting when using the comparator. Avoid direct sunlight which can cause glare. If the color is between two standards, estimate the value.
• Nekonzistentní výsledky: Repeat the test with a fresh sample and new reagents. Ensure test tubes are clean and free of residue. Verify proper technique for adding reagents and waiting for color development.

Specifikace

Záruka a podpora

For information regarding product warranty, technical support, or to order replacement parts and reagents, please contact LaMotte customer service directly. Refer to the contact information provided on the product packaging or the official LaMotte webmísto.