1. Úvod
This manual provides comprehensive instructions for the installation, operation, and maintenance of the Finder 140182300000PAS Multifunction Timer/Staircase Relay. Please read this manual carefully before installation and use to ensure proper function and safety.
2. Bezpečnostní informace
WARNING: Electrical shock hazard. Installation and maintenance should only be performed by qualified personnel in accordance with all local and national electrical codes.
- Před instalací nebo servisem zařízení vždy odpojte napájení.
- Ensure the device is installed in a suitable enclosure to protect against environmental factors.
- Zkontrolujte správné zapojení kabeláže, abyste předešli poškození zařízení nebo připojeného vybavení.
- Nepřekračujte stanovený objemtage a aktuální hodnocení.
3. Konec produktuview
The Finder 140182300000PAS is a versatile multifunction timer and staircase relay designed for various electrical control applications. It features a 230V operating voltage, a 1 NO (normally open) contact, and a 16A current rating. Its compact design allows for easy integration into electrical panels.
Obrázek 1: Přední view of the Finder 140182300000PAS Multifunction Timer/Staircase Relay. This image shows the device's casing, terminals, and the adjustable timer dial.
Obrázek 2: Example application of the Finder 140182300000PAS controlling staircase lighting. The relay is shown in an inset, demonstrating its use in a typical residential or commercial setting.
Obrázek 3: Další aplikace example, showing the Finder 140182300000PAS managing lighting for a modern spiral staircase. This highlights the device's suitability for various architectural lighting designs.
4. Nastavení a instalace
4.1 Fyzické rozměry
Refer to the dimensional drawing for precise measurements to ensure proper fit and mounting.
Obrázek 4: Dimensional drawing for the Type 14.01 relay, showing height, width, and depth in millimeters. This diagram is crucial for planning installation space.
4.2 Schémata zapojení
The Finder 140182300000PAS supports both 3-wire and 4-wire connection types. Select the appropriate diagram for your installation.
Obrázek 5: Wiring Diagram Type 14.01 for a 3-wire connection. This diagram illustrates how to connect the relay to the power supply and load using a 3-wire configuration, typically for staircase lighting with a common neutral.
Obrázek 6: Wiring Diagram Type 14.01 for a 4-wire connection. This diagram shows the connections for a 4-wire setup, which might be used in systems requiring separate control wires for the relay and the load.
5. Návod k obsluze
5.1 Nastavení časovače
The device features an adjustable timer dial on its front face. To set the desired timing duration:
- Locate the orange dial labeled 'T(min)' on the front of the relay.
- Rotate the dial to align the indicator with the desired time setting (e.g., 5, 10, 15, 20 minutes).
- The selected time will determine how long the connected load remains active after activation.
5.2 Multifunction Operation
The Finder 140182300000PAS operates as both a staircase timer and a multifunction relay. When activated (e.g., by a push-button switch), the relay will close its contact, powering the connected load for the duration set on the timer. It can be used for applications such as:
- Staircase lighting control.
- Timed ventilation systems.
- General purpose timed switching.
6. Údržba
The Finder 140182300000PAS is designed for long-term, maintenance-free operation. However, periodic checks are recommended:
- Ujistěte se, že všechna kabelová připojení zůstanou bezpečná.
- Udržujte zařízení bez prachu a nečistot.
- Inspect for any signs of physical damage or overheating.
- If the device is exposed to harsh environments, consider more frequent inspections.
VAROVÁNÍ: Před prováděním jakékoli údržby nebo kontroly vždy odpojte napájení.
7. Řešení problémů
Pokud zařízení nefunguje podle očekávání, zvažte následující:
- No power to the load: Check the main power supply, circuit breaker, and all wiring connections. Ensure the device is receiving 230V.
- Timer not activating: Verify the input signal (e.g., from the push-button switch) is correctly connected and functioning.
- Incorrect timing duration: Re-check the setting on the 'T(min)' dial.
- Přehřátí zařízení: Ensure the load current does not exceed 16A. Check for proper ventilation around the device.
If issues persist after checking these points, consult a qualified electrician or contact Finder customer support.
8. Specifikace
| Funkce | Specifikace |
|---|---|
| Výrobce | Nálezce |
| Číslo modelu | 140182300000PAS |
| Rozměry produktu (D x Š x V) | 8.4 x 1.8 x 5.9 cm |
| Hmotnost | 60 gramů |
| Barva | Šedá |
| Materiál | Plast |
| svtage | 230 voltů |
| Typ kontaktu | 1 Z (Normálně otevřený) |
| Aktuální hodnocení | 16 A |
| Počet nastavení | 8 (Timer functions) |
| Baterie součástí balení | Žádný |
| Požadované baterie | Žádný |
| Dostupnost náhradních dílů | Informace nejsou k dispozici |
8.1 Certifikace
The product complies with various international standards.
Obrázek 7: Product certifications, including CE, UKCA, EAC, and Q-Mark, indicating compliance with European, UK, Eurasian, and quality standards respectively.
9. Záruka a podpora
Informace o záruce a technickou podporu naleznete v oficiálním vyhledávači Finder. webnebo se obraťte na místního distributora. Uschovejte si účtenku jako doklad o koupi.
