NITECORE RSW1 Remote Pressure Switch Instruction Manual

Zavedení

The NITECORE RSW1 Remote Pressure Switch is designed to replace the standard tail cap on compatible NITECORE tactical flashlights. This accessory allows for remote activation and mode control, enhancing usability, especially when the flashlight is weapon-mounted. The coiled cable provides flexibility in placement, ensuring convenient access to the pressure pad.

Nastavení a instalace

1. Remove the Original Tail Cap: Unscrew the existing tail cap from your compatible NITECORE flashlight.
2. Attach the RSW1: Screw the tail cap component of the RSW1 Remote Pressure Switch onto the flashlight body until it is securely tightened.
3. Position the Pressure Pad: Place the pressure pad (Momentary-on Switch) in your preferred location, typically where your stabilizing hand can easily access it. The coiled cable extends up to 15 inches for versatile mounting options.

Návod k obsluze

• Okamžitá aktivace: Press and hold any of the three buttons on the pressure pad (Momentary-on Switch) to activate the flashlight momentarily. Release the button to turn the flashlight off.
• Neustálé zapnutí/vypnutí: The tail cap component of the RSW1 features a push button (Push Button On/off Switch). Press this button to turn the flashlight on for constant illumination. Press it again to turn the flashlight off.
• Změna režimu: The RSW1 is designed to work with flashlights that have a mode-changing function. The specific method for changing modes (e.g., brightness levels, strobe) will depend on the flashlight model. Typically, this is done via a dedicated mode button on the flashlight itself, or by partially pressing the tail switch. Refer to your flashlight's manual for detailed mode-changing instructions.

Kompatibilita

The NITECORE RSW1 Pressure Switch is compatible with a range of NITECORE tactical flashlights. Please verify your flashlight model against the lists below:

Kompatibilní modely:

• CR6, CG6, CI6, CU6
• P12, P12GT, P30, P16, P16TAC, P26
• MH12, MH12GT, MH25, MH25GT, MH27, MH27UV, MH40, MH40GT, MH41
• MT10C, MT42, MT40GT, MT25, MT26
• SRT6, SRT7, SRT7GT

Nekompatibilní modely:

• GTS series: MH12GTS, MH25GTS (These models require the RSW2 Pressure Switch)
• Strobe ready series: P10, P05, P10GT, P20, P20UV (These models require the RSW2 Pressure Switch)

Specifikace

• Položka Rozměry balení d x š x v: 3.2 x 2.9 x 1.1 palce
• Hmotnost balení: 0.02 libry
• Rozměry položky D x Š x V: 3.2 x 2.9 x 1.1 palce
• Hmotnost položky: 4.54 g
• Barva: Černý
• Maximální počet podporovaných zařízení: 1
• Speciální funkce: Ergonomický

Co je v krabici

• NITECORE RSW1 Remote Pressure Switch

Údržba

To maintain the functionality and longevity of your RSW1 Remote Pressure Switch, keep it clean and free from debris. Regularly inspect the connections for any signs of wear or damage. Store the switch in a dry environment when not in use.

Záruka a podpora

For warranty information or technical support, please refer to the official NITECORE website or contact your authorized NITECORE dealer. Keep your purchase receipt as proof of purchase for warranty claims.