1. Úvod
This manual provides instructions for the proper use, installation, and maintenance of the Panduit IT9100-CUV6 In-Line Cable Tie. This product is designed for securing and bundling electrical cables and other items, particularly in outdoor environments due to its weather-resistant and UV-stabilized properties.
2. Bezpečnostní informace
Před použitím produktu si prosím přečtěte a pochopte všechny bezpečnostní informace.
- Always wear appropriate personal protective equipment (PPE) when handling tools or materials.
- Ensure the cable tie is correctly sized for the bundle diameter to prevent over-tightening or insufficient securing.
- Avoid using damaged cable ties. Inspect each tie before use.
- Uchovávejte mimo dosah dětí.
- Dispose of used or broken cable ties responsibly according to local regulations.
3. Konec produktuview a Komponenty
The Panduit IT9100-CUV6 is an in-line cable tie constructed from weather-resistant, UV-stabilized nylon 6.6. It features a parallel-entry head with a plastic locking pawl for secure closure.
Figure 1: The Panduit IT9100-CUV6 In-Line Cable Tie, showing its full length and design. This cable tie is dark blue and made from durable nylon.
Mezi klíčové komponenty patří:
- Popruh: The long, flexible part that wraps around the bundle.
- Hlava: The housing containing the locking mechanism.
- Locking Pawl: A plastic mechanism within the head that engages with the strap's teeth to secure the bundle.
Obrázek 2: Detailní záběr view of the Panduit cable tie head, clearly showing the brand name and the locking mechanism.
4. Pokyny k instalaci
Follow these steps to properly install the Panduit IT9100-CUV6 cable tie:
- Připravte si balíček: Gather the items or cables you wish to bundle. Ensure they are aligned and positioned as desired.
- Omotejte kravatu: Wrap the strap of the cable tie around the bundle, ensuring it is positioned correctly for the application.
- Vložení popruhu: Insert the pointed end of the strap into the opening of the cable tie head.
- Tighten the Tie: Pull the strap through the head until the bundle is secured to the desired tightness. The locking pawl will engage with the teeth on the strap, preventing it from loosening. Avoid over-tightening, which can damage the bundled items.
- Ořízněte přebytečný materiál (volitelné): If necessary, use a cable tie tensioning tool or a pair of flush cutters to trim any excess strap protruding from the head. Trim flush with the head to prevent sharp edges.
5. Návod k obsluze
The Panduit IT9100-CUV6 cable tie is designed for single-use applications. Once tightened, the locking mechanism is permanent. To remove a cable tie, carefully cut the strap using appropriate cutting tools, taking care not to damage the bundled items.
6. Údržba a skladování
6.1. Údržba
Panduit IT9100-CUV6 cable ties require minimal maintenance. Periodically inspect installed ties for signs of wear, damage, or degradation, especially in harsh outdoor environments. Replace any compromised ties immediately.
6.2. Skladování
Store cable ties in their original packaging in a cool, dry place away from direct sunlight and extreme temperatures. Proper storage helps maintain the material integrity and performance of the nylon.
Figure 3: A package containing 100 Panduit IT9100-CUV6 cable ties, illustrating how they are typically supplied for storage.
7. Řešení problémů
- Cable tie not securing: Ensure the strap is fully inserted into the head and pulled tight enough for the locking pawl to engage. Check for any obstructions or damage to the locking mechanism.
- Bundle too loose: The cable tie may not be pulled tight enough, or the wrong size tie may have been selected for the bundle diameter.
- Cable tie breaks during installation: This could be due to excessive force during tightening, a defective tie, or the tie being used in temperatures below its recommended operating range.
8. Specifikace
The following table details the technical specifications for the Panduit IT9100-CUV6 In-Line Cable Tie:
| Funkce | Specifikace |
|---|---|
| Číslo modelu | IT9100-CUV6 |
| Materiál | Weather-resistant UV-stabilized Nylon 6.6 |
| Barva | UV Dark Blue |
| Minimální pevnost v tahu | 124 lb. (552 N) |
| Maximální průměr svazku | 3.94 palce (100 mm) |
| Minimum Bundle Diameter | 0.33 palce (8.4 mm) |
| Délka | 14.1 palce (358 mm) |
| Šířka | 0.350 palce (8.9 mm) |
| Tloušťka | 0.065 palce (1.65 mm) |
| Dodržování | CE, RoHS |
Figure 4: Technical drawing illustrating the dimensions and specifications of the Panduit IT9100-CUV6 cable tie.
9. Záruka a podpora
For information regarding product warranty, technical support, or to contact Panduit customer service, please refer to the official Panduit webnebo se obraťte na místního distributora. Uschovejte si doklad o koupi pro případ reklamace.
Navštivte Panduit Store pro více produktů a informací.
