Jupiter Woodworking Tipped Saw User Manual

Zavedení

This manual provides essential information for the safe and effective use of your Jupiter Woodworking Tipped Saw, Model N14752. Please read this manual thoroughly before installation and operation to ensure optimal performance and safety.

Bezpečnostní informace

Always prioritize safety when working with power tools and accessories. Failure to follow these instructions may result in serious injury or damage to the product.

• Používejte vhodné osobní ochranné prostředky (OOP) including safety glasses, hearing protection, and gloves.
• Ensure the saw blade is correctly installed and securely fastened před operací.
• Vždy odpojte napájení to the tool before changing blades or performing maintenance.
• Keep hands and body clear of the cutting path.
• Use the correct blade for the material being cut. This blade is designed for wood and wood-based materials.
• Store blades in a safe, dry place away from children.

Konec produktuview

The Jupiter N14752 is a high-quality woodworking tipped saw blade designed for precise and clean cuts in various wood materials. Its sharp cutting edge ensures a beautiful cut surface.

Obrázek 1: Packaging of the Jupiter Woodworking Tipped Saw N14752. The packaging highlights key features such as the 147mm outer diameter, 52 teeth, 20mm inner diameter, and 1.6mm blade thickness. It also lists suitable materials including general wood, plywood, veneer, laminated wood, and MDF.

Klíčové vlastnosti:

• Sharp cutting edge for clean and beautiful cut surfaces.
• Designed for general wood, plywood, veneer, laminated wood, and MDF.
• Normal type tipped saw blade.

Nastavení a instalace

1. Ujistěte se, že je napájení vypnuto: Before installing or removing the saw blade, always ensure your power tool is unplugged or its battery is removed.
2. Clean Arbor and Flanges: Inspect the saw's arbor and flanges for any debris or burrs. Clean them thoroughly to ensure the blade sits flush.
3. Orient the Blade Correctly: Observe the rotation arrow on the saw blade. This arrow must match the rotation direction of your saw.
4. Instalace čepele: Place the blade onto the arbor, ensuring it is seated correctly against the inner flange.
5. Secure Outer Flange and Nut: Install the outer flange and tighten the arbor nut securely using the appropriate wrench. Do not overtighten.
6. Check for Wobble: Manually rotate the blade to ensure it spins freely and without wobble.

Návod k obsluze

Follow these guidelines for safe and effective cutting:

• Zajištění obrobku: Vždy třamp nebo jinak zajistěte řezaný materiál, aby se během provozu nepohyboval.
• Správná rychlost posuvu: Apply a consistent and moderate feed rate. Forcing the blade can lead to poor cut quality, overheating, and premature blade wear.
• Hloubka čepele: Adjust the blade depth so that the teeth extend slightly below the workpiece.
• Vyčistěte pracovní oblast: Ujistěte se, že vaše pracovní oblast je bez překážek a dobře osvětlená.
• Ochladit: Allow the blade to cool down periodically during extended use to prevent overheating.

Údržba

• Čištění: Regularly clean the blade to remove resin and sawdust buildup. Use a specialized blade cleaner and a stiff brush. Avoid abrasive materials.
• Inspekce: Before each use, inspect the blade for any signs of damage, such as bent teeth, cracks, or excessive wear. Do not use a damaged blade.
• Ostření: When the blade becomes dull, have it professionally sharpened. Attempting to sharpen it yourself without proper tools can damage the blade.
• Skladování: Store the blade in its original packaging or a protective case in a dry environment to prevent rust and damage.

Odstraňování problémů

Specifikace

Záruka a podpora

Informace o záruce nebo technickou podporu naleznete na obalu produktu nebo se obraťte přímo na výrobce. Uschovejte si účtenku jako doklad o koupi.