Důležité bezpečnostní informace
Read all instructions carefully before installation and use. Failure to follow these instructions could result in property damage, serious injury, or death. If you have any questions, contact Chief customer support.
- Ensure the mounting surface can support the combined weight of the mount and the projector.
- Use appropriate fasteners for your specific mounting surface.
- Nepřekračujte maximální nosnost 113.4 kg (250 liber).
- Instalaci by měl provádět kvalifikovaný personál.
- Během instalace držte děti a domácí zvířata mimo dosah.
Obsah balení
Před zahájením instalace ověřte, zda jsou přítomny všechny komponenty.
- Chief VCMU Projector Mount Assembly
- HBU Bracket (Universal Projector Interface)
- Mounting Hardware Kit (various screws, washers, nuts)
- Návod k použití (tento dokument)
Image: The Chief VCMU Universal Projector Mount showing its main assembly and adjustable arms. This image illustrates the primary components included in the package.
Nastavení a instalace
This section outlines the steps for securely mounting your Chief VCMU projector mount.
1. Příprava montážního povrchu
Identify a suitable mounting location. The surface must be structurally sound and capable of supporting the combined weight of the mount and projector (up to 250 lbs).
- For ceiling installations, locate ceiling joists or use appropriate anchors.
- For wall installations, ensure studs are located or use heavy-duty wall anchors.
2. Attach the HBU Bracket to the Projector
- Align the HBU bracket arms with the mounting holes on your projector.
- Use the appropriate screws from the hardware kit to secure the bracket to the projector. Ensure all screws are tightened evenly.
- Adjust the arms as necessary to achieve a balanced and secure fit.
3. Mount the VCMU Assembly
- Position the VCMU mount base on the prepared mounting surface.
- Mark the drilling locations through the mount's base plate.
- Drill pilot holes as required for your chosen fasteners.
- Secure the VCMU mount base to the surface using the appropriate heavy-duty fasteners. Ensure it is firmly attached and level.
4. Attach Projector to Mount
- Carefully lift the projector with the attached HBU bracket.
- Align the HBU bracket with the receiver on the VCMU mount.
- Slide the bracket into place until it locks securely.
- Engage any safety screws or locking mechanisms to prevent accidental disengagement.
Provoz a seřízení
Once installed, the Chief VCMU mount allows for precise adjustments to optimize your projector's image.
Pitch, Roll, and Yaw Adjustments
- Nastavení výšky tónu: Loosen the pitch adjustment screws slightly. Tilt the projector up or down to achieve the desired vertical angle. Tighten screws to secure.
- Nastavení rolování: Loosen the roll adjustment screws. Rotate the projector left or right to level the image horizontally. Tighten screws to secure.
- Yaw Adjustment: The mount allows for rotation around the central axis. Loosen the yaw locking mechanism, rotate the projector to the desired horizontal position, and then re-tighten.
Always make small adjustments and re-tighten all screws to ensure stability after each adjustment.
Údržba
Regular maintenance ensures the longevity and safe operation of your Chief VCMU projector mount.
- Pravidelná prohlídka: Annually inspect all mounting hardware and connections for tightness. Re-tighten any loose screws or bolts.
- Čištění: Otřete držák měkkým, suchým hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla, která by mohla poškodit povrchovou úpravu.
- Nosnost: Do not add additional weight to the mount beyond the projector's weight and the specified maximum capacity.
Odstraňování problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Obraz projektoru je zkreslený. | Roll adjustment not properly set or screws loose. | Adjust the roll mechanism and ensure all screws are tightened. |
| Projector image is too high/low. | Pitch adjustment not properly set or screws loose. | Adjust the pitch mechanism and ensure all screws are tightened. |
| Držák se zdá být nestabilní. | Mounting fasteners are loose or incorrect for the surface. | Verify all mounting fasteners are securely tightened. Ensure the mounting surface is adequate. If unsure, consult a professional installer. |
| Projector not securely attached to HBU bracket. | Incorrect screws used or not tightened. | Ensure correct screws are used and fully tightened to secure the projector to the HBU bracket. |
Specifikace
- Model: VCMU
- Značka: Hlavní
- Materiál: Vysoce odolná ocel
- Maximální nosnost: 250 lb (113.4 kg)
- Rozměry produktu: 17.01 x 9.25 x 3.82 palce (43.2 x 23.5 x 9.7 cm)
- Barva: Černý
- Kompatibilní zařízení: Universal Projectors
- Typ montáže: Universal (Ceiling/Wall adaptable with appropriate accessories, not included)
- První dostupné datum: 14. dubna 2012
- Výrobce: Hlavní
- Země původu: Čína
Záruka a podpora
For warranty information or technical assistance, please contact Chief customer support directly. Refer to the official Chief webKonkrétní záruční podmínky a kontaktní údaje naleznete na webových stránkách nebo v dokumentaci k nákupu.
Výrobce: Hlavní
Webmísto: www.legrandav.com/products/chief (Napřampodkaz, skutečný odkaz se může lišit)
Kontakt: Viz pokyny výrobce webstránky s aktuálními kontaktními informacemi.
