Návod k obsluze rádia Tivoli Audio Model One Bluetooth AM/FM

Zavedení

The Tivoli Audio Model One Bluetooth AM/FM Radio is designed to provide high-quality audio reception and reproduction. Featuring a classic design with a handmade wood cabinet, this radio integrates both traditional AM/FM tuning and modern Bluetooth connectivity. Its simple controls offer an intuitive user experience, delivering clear sound and reliable performance.

Co je v krabici

• (1) Rádio Model One BT
• (1) Owner's Manual
• (1) Napájení
• (1) Externí FM anténa

Nastavení

1. Rozbalení: Opatrně vyjměte všechny součásti z obalu.

   

2. Připojení napájení: Connect the power supply to the DC input on the rear of the radio and then plug it into a wall outlet.

   

3. Připojení antény: For optimal FM reception, connect the included external FM antenna to the "FM-EXT" jack on the rear panel. For AM reception, the internal AM antenna is usually sufficient, but an external AM antenna can be connected if needed.
4. Umístění: Position the radio on a stable, flat surface away from direct sunlight, heat sources, or excessive moisture. Experiment with different locations to find the best reception for both AM and FM bands.

Návod k obsluze

1. Zapnutí/vypnutí a výběr zdroje

• Locate the three-position switch on the front panel.
• To turn the radio on, slide the switch from "OFF" to either "FM", "AM", "BT" (Bluetooth), or "AUX" (Auxiliary Input) depending on your desired source.
• To turn the radio off, slide the switch to "OFF".

2. Ladění AM/FM rádia

• Set the source switch to "FM" or "AM".
• Use the large tuning dial to scan for stations. The tuning indicator light will illuminate when a strong signal is received, indicating optimal tuning.
• Upravte hlasitost pomocí ovladače hlasitosti.

3. Připojení Bluetooth

• Set the source switch to "BT". The Bluetooth indicator light will begin to flash, indicating it is in pairing mode.
• On your Bluetooth-enabled device (e.g., smartphone, tablet), navigate to the Bluetooth settings and select "Tivoli Audio Model One BT" from the list of available devices.
• Once paired, the Bluetooth indicator light on the radio will glow solid, and you can stream audio from your device.

4. Pomocný vstup

• Connect an external audio device (e.g., MP3 player, CD player) to the "AUX IN" port on the rear panel using a 3.5mm audio cable (not included).
• Set the source switch to "AUX".
• Ovládejte přehrávání a hlasitost z připojeného zařízení.

5. Oficiální video produktu

Údržba

• Čištění: Use a soft, dry cloth to clean the radio's cabinet and controls. Avoid abrasive cleaners or solvents, which can damage the finish.
• Péče o dřevo: The wood cabinet can be polished with a non-abrasive wood furniture polish as needed.
• Péče o anténu: Ensure the external FM antenna is not bent or damaged.

Odstraňování problémů

• Bez napájení: Ensure the power supply is securely connected to both the radio and a working electrical outlet.
• Špatný příjem rádia:
  • Verify the external FM antenna is properly connected and fully extended.
  • Reposition the radio or antenna to improve signal strength.
  • Zkontrolujte místní rušení od jiných elektronických zařízení.
• Problémy s párováním Bluetooth:
  • Ensure the radio is set to "BT" mode and the indicator light is flashing.
  • Ujistěte se, že je na vašem zařízení zapnuté Bluetooth a že je v dosahu.
  • Pokud bylo zařízení dříve spárováno, zkuste jej v telefonu „zapomenout“ a znovu jej spárovat.
• Žádný zvuk z pomocného vstupu:
  • Confirm the radio is set to "AUX" mode.
  • Check the audio cable connection at both the radio and the external device.
  • Ensure the volume on both the radio and the external device is turned up.

Specifikace

Záruka a podpora

For warranty information, product support, or service inquiries, please refer to the included Owner's Manual or visit the official Tivoli Audio webUschovejte si doklad o koupi pro případ reklamace.