Návod k obsluze infračerveného teploměru Testo 0560 8312 830-T1

1. Úvod

This manual provides essential instructions for the safe and effective use of the Testo 0560 8312 830-T1 IR Thermometer. This device is designed for non-contact measurement of surface temperatures in various industrial and trade applications. It features 12:1 optics and a dual laser for precise targeting, allowing for accurate temperature readings even on smaller objects from a safe distance.

2. Bezpečnostní informace

Please read this section carefully before operating the device to ensure safe and proper use.

• Do not point the laser directly into eyes or at other people.
• Nepoužívejte zařízení ve výbušném prostředí.
• Protect the device from extreme temperatures, impacts, and strong vibrations.
• Udržujte zařízení čisté a suché.
• Používejte zařízení pouze k určenému účelu, jak je popsáno v této příručce.
• Opravy by měl provádět pouze autorizovaný personál.

3. Konec produktuview

The Testo 830-T1 IR Thermometer is a handheld device designed for quick and accurate non-contact temperature measurements.

Figure 1: Testo 830-T1 Infrared Thermometer with included battery.

Obrázek 2: Přední strana view of the Testo 830-T1, showing the display, measurement trigger, and control buttons.

3.1 Komponenty

• Infračervený senzor: Located at the front of the device, used for non-contact temperature measurement.
• Duální laserová ukazovátka: Two laser dots indicate the measurement spot size.
• Zobrazit: Shows temperature readings, measurement units, battery status, and other indicators.
• Spouštěč měření: Aktivuje měření a laser.
• Ovládací tlačítka: For navigating menus, adjusting settings (e.g., emissivity, units), and accessing functions like MIN/MAX.
• Přihrádka na baterie: Umístěno v rukojeti pro instalaci baterie.

4. Nastavení

4.1 Instalace baterie

1. Najděte krytku přihrádky na baterie na rukojeti teploměru.
2. Otevřete kryt.
3. Insert two AAA batteries, ensuring correct polarity (+/-). The device requires 2 AAA batteries, which are included.
4. Bezpečně zavřete kryt bateriového prostoru.

4.2 Počáteční zapnutí a výběr jednotky

Upon first use or after battery replacement, the device will power on. You may need to select your preferred temperature unit (Celsius or Fahrenheit).

• To change units: Typically, this involves pressing and holding a specific button (often the 'Mode' or 'Set' button, or an arrow button) while the device is off, then powering it on, or accessing a menu option. Refer to the on-screen prompts or the official Testo documentation for the exact procedure for your specific device firmware, as methods can vary.

5. Návod k obsluze

5.1 Provedení měření

1. Point the infrared sensor towards the target object.
2. Press and hold the measurement trigger. The dual laser pointers will activate, indicating the measurement spot.
3. Na displeji se zobrazí naměřená teplota.
4. Release the trigger to hold the last measured value (HOLD function).

Figure 3: The Testo 830-T1 in use, measuring the surface temperature of a radiator.

5.2 Understanding 12:1 Optics and Dual Laser

The 12:1 optics mean that at a distance of 12 inches, the measurement spot diameter is 1 inch. The dual laser pointers converge at the center of this measurement spot, helping you accurately identify the area being measured. This is particularly useful for measuring smaller objects or from a greater distance.

5.3 Funkce MIN/MAX

The device can display the minimum and maximum temperatures recorded during a continuous measurement. This function is useful for monitoring temperature fluctuations over a period.

• To activate MIN/MAX: Press the appropriate button (refer to your device's specific button layout, often an arrow or 'Mode' button) while taking a measurement. The display will cycle through current, minimum, and maximum values.

5.4 Úprava emisivity

Emissivity is a measure of an object's ability to emit infrared energy. Different materials have different emissivities. For accurate readings, adjust the emissivity setting on your thermometer to match the material being measured. Common emissivity values:

• 0.95 (default for many devices): Most organic materials, painted surfaces, water, plastic.
• 0.85-0.90: Concrete, brick, rough wood.
• 0.60-0.70: Polished metals (can vary significantly).

Consult an emissivity table for specific materials. Incorrect emissivity settings will lead to inaccurate temperature readings.

6. Údržba

6.1 Čištění

To ensure optimal performance and longevity, keep the device clean.

• Wipe the device exterior with a clean, damp tkanina. Nepoužívejte abrazivní čisticí prostředky nebo rozpouštědla.
• Carefully clean the infrared lens with a soft, lint-free cloth or a lens cleaning wipe. Avoid scratching the lens.

6.2 Výměna baterie

When the battery indicator on the display shows low power, replace the batteries promptly to avoid interruption of operation. Follow the battery installation steps in Section 4.1.

6.3 Skladování

Store the thermometer in a dry, dust-free environment within the recommended temperature range (refer to specifications). If storing for extended periods, remove the batteries to prevent leakage.

7. Řešení problémů

If you encounter issues with your Testo 830-T1, refer to the following common problems and solutions:

• Zařízení se nezapne:
  • Check if batteries are correctly inserted with proper polarity.
  • Vyměňte baterie za nové.
• Nepřesné údaje:
  • Ensure the infrared lens is clean.
  • Verify the emissivity setting matches the target material.
  • Ensure the measurement distance is appropriate for the target size (12:1 optics).
  • Avoid measuring through glass or highly reflective surfaces.
• Laser není viditelný:
  • Zkontrolujte stav baterie.
  • Ensure the measurement trigger is pressed.

If problems persist, contact Testo customer support for assistance.

8. Specifikace

9. Záruka a podpora

For warranty information, technical support, or service inquiries, please contact Testo SE & Co. directly. Details regarding specific warranty periods and terms are typically provided with the product packaging or on the manufacturer's official webmísto.

Výrobce: Testo SE & Co.

Uschovejte si prosím doklad o koupi pro uplatnění záruky.