Zavedení
Welcome to the user manual for your Timberland Washington Summit Digital Sensor Pacer Watch, Model 13386JPBUS_01. This guide provides detailed instructions for setting up, operating, maintaining, and troubleshooting your watch. Designed for durability and functionality, this watch features a digital display, chronograph, dual-time, alarm, compass, day-date, month display, finger touch heart rate meter, light, lap timer, digital sensor, and timer functions.
This image displays the Timberland Washington Summit Digital Sensor Pacer Watch, highlighting its digital grey dial, blue rubber strap, and function pushers.
Nastavení
1. Rozbalení a počáteční kontrola
- Opatrně vyjměte hodinky z obalu.
- Inspect the watch for any visible damage.
- Potvrďte přítomnost všech součástí.
2. Activating the Watch
Your watch comes with a pre-installed battery. If the display is not active, gently press any button to wake the watch. If the watch remains inactive, refer to the Troubleshooting section.
3. Nastavení času a data
- Locate the mode button (usually on the left side). Press it repeatedly until the time setting mode is displayed.
- Use the adjustment buttons (typically on the right side) to change the hour, minute, year, month, and day.
- Press the mode button again to confirm settings and exit the time setting mode.
Návod k obsluze
Navigace v režimu
Stiskněte tlačítko Režim button (refer to your watch's specific button layout) to cycle through the following functions: Time, Chronograph, Dual-Time, Alarm, Compass, Heart Rate, Lap Timer, and Timer.
1. Zobrazení času a data
- The default display shows the current time, day, and date.
- Chcete-li aktivovat podsvícení, stiskněte tlačítko Světlo tlačítko.
2. Chronograf (stopky)
- Navigate to the Chronograph mode.
- Stiskněte tlačítko Start/Stop tlačítko pro spuštění měření času.
- Stiskněte Start/Stop znovu pro pozastavení/obnovení.
- Stiskněte tlačítko Resetovat button to clear the time.
3. Dual-Time
Tato funkce vám to umožňuje view a second time zone. In Dual-Time mode, use the adjustment buttons to set the desired second time.
4. Alarm
- Vstupte do režimu alarmu.
- Use the adjustment buttons to set the alarm time.
- Activate or deactivate the alarm using the designated button (refer to your watch's specific button functions).
5. Kompas
In Compass mode, hold the watch level and allow it to calibrate. The display will indicate the cardinal directions. For accurate readings, avoid strong magnetic fields.
6. Finger Touch Heart Rate Meter
To measure your heart rate, ensure your fingers are clean and dry. In Heart Rate mode, place your finger firmly on the designated sensor area (usually on the bezel or case back). Remain still until the reading is displayed.
7. Lap Timer and Timer
The Lap Timer function allows you to record multiple lap times during an activity. The Timer (countdown timer) can be set for a specific duration, alerting you when it reaches zero. Refer to the on-screen prompts and button functions in their respective modes for detailed operation.
Údržba
1. Čištění hodinek
- Otřete pouzdro a řemínek hodinek měkkým hadříkemamp tkanina.
- Vyhněte se používání agresivních chemikálií, rozpouštědel nebo abrazivních čisticích prostředků.
- For rubber straps, a mild soap solution can be used, followed by rinsing with clean water and thorough drying.
2. Voděodolnost
Your watch is water resistant to 30 meters (99 feet). This means it can withstand splashes of water and rain. It is not suitable for showering, swimming, or submersion in water. Nepoužívejte tlačítka, pokud jsou hodinky mokré.
3. Výměna baterie
When the display dims or functions become erratic, the battery may need replacement. This watch uses 1 product-specific battery. It is recommended to have the battery replaced by a qualified watch technician to ensure proper sealing and maintain water resistance.
Odstraňování problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Displej je prázdný nebo tmavý. | Slabá baterie. | Vyměňte baterii (doporučeno odborníkem). |
| Čas je nesprávný. | Čas nebyl správně nastaven nebo byl upraven neúmyslně. | Refer to "Setting Time and Date" in the Setup section. |
| Tlačítka nereagují. | Watch may be in a locked mode or internal error. | Try pressing all buttons to see if it unlocks. If unresponsive, a battery reset may be needed by a technician. |
| Heart rate sensor not working. | Improper finger placement, dirty sensor, or dry skin. | Ensure clean, firm contact with the sensor. Moisten finger slightly if skin is very dry. |
Specifikace
| Číslo modelu | 13386JPBUS_01 |
| Značka | Timberland |
| Typ pohybu | Křemen |
| Průměr pouzdra | 47 milimetrů |
| Tloušťka pouzdra | 14 milimetrů |
| Typ materiálu pásku | Pryž |
| Barva pásu | Modrý |
| Křišťálový typ | Mineral glass with sapphire coating |
| Hloubka vodotěsnosti | 30 metrů (99 stop) |
| Jsou vyžadovány baterie | 1 baterie specifická pro produkt (součástí balení) |
| Hmotnost položky | 249 g |
Informace o záruce
This Timberland Washington Summit Digital Sensor Pacer Watch comes with a 2-year store warranty. For any warranty claims or service, please contact the seller of record directly. Keep your proof of purchase for warranty validation.
Podpora
For further assistance, technical support, or inquiries not covered in this manual, please refer to the official Timberland webnebo kontaktujte jejich oddělení zákaznických služeb.
- Výrobce: Timberland
- Online zdroje: Visit the official Timberland website for product updates and additional support.
- Podpora prodejců: For purchase-specific issues, contact the retailer from whom the watch was purchased.
