1. Úvod
This instruction manual provides essential information for the safe and effective installation, operation, and maintenance of your Nardi 1200W 230V Oven Heating Element, model FWSAI051. Please read this manual thoroughly before proceeding with any installation or service to ensure proper function and safety.
2. Bezpečnostní informace
WARNING: Risk of electric shock and injury. Installation and service should only be performed by a qualified technician.
- Always disconnect the oven from the main power supply before attempting any installation, maintenance, or repair.
- Wear appropriate personal protective equipment, including insulated gloves and eye protection.
- Ensure the replacement element matches the original specifications (voltage, wattage, and physical dimensions) to prevent damage to the oven or fire hazards.
- Do not operate the oven if the heating element is damaged or improperly installed.
- Keep children and pets away from the appliance during service.
3. Konec produktuview
The Nardi 1200W 230V Oven Heating Element (Model FWSAI051) is a genuine replacement part designed to restore heating functionality to compatible Nardi ovens. This element is responsible for generating the heat required for cooking and baking within the oven cavity.
Image 1: Nardi 1200W 230V Oven Heating Element. This image displays the heating element, typically a coiled metal tube, designed for installation in Nardi ovens.
4. Specifikace
| Značka: | Nardi |
| Číslo modelu: | FWSAI051 |
| Výkon: | 1200 wattů |
| svtage: | 230 voltů |
| Rozměry produktu: | Přibližně 3.99 x 3.99 x 1.27 cm |
| Hmotnost: | Přibližně 320 gramů |
5. Instalace
This section outlines the general steps for replacing an oven heating element. Specific oven models may vary, so always refer to your oven's service manual for detailed instructions.
Požadované nástroje:
- Screwdriver (Phillips or flathead, depending on oven fasteners)
- Kleště
- Zateplené rukavice
- Multimetr (volitelný, pro testování)
Kroky instalace:
- Odpojit napájení: Locate the circuit breaker for your oven and turn off the power. Verify that the power is off by attempting to turn on the oven.
- Access the Oven: Depending on your oven model, you may need to pull the oven out from its cabinet or remove the rear access panel. For some models, the element is accessible from inside the oven cavity.
- Odstranění starého prvku:
- Inside the oven, locate the screws holding the heating element in place. Remove these screws.
- Opatrně vytáhněte prvek o několik centimetrů dopředu, abyste odkryli elektrické svorky.
- Note the position of the wires connected to the old element. It is recommended to take a photograph for reference.
- Disconnect the wires from the old element's terminals using pliers if necessary. Ensure the wires do not retract into the oven wall.
- Remove the old heating element from the oven.
- Instalace nového prvku:
- Carefully insert the new Nardi heating element into the oven cavity, guiding the terminals through the openings.
- Connect the electrical wires to the terminals of the new element, ensuring a secure connection. Refer to your photograph if needed.
- Push the element fully into place and secure it with the screws removed earlier.
- Znovu sestavte a otestujte:
- Replace any access panels or re-position the oven as required.
- Obnovte napájení trouby jističem.
- Turn on the oven to a low heat setting and observe the new element. It should begin to glow red, indicating proper function.
- Allow the oven to heat for a few minutes to burn off any manufacturing residues, which may produce a slight odor.
6. Operating the Heating Element
The heating element operates automatically as part of your oven's heating system. Once installed, its function is controlled by the oven's thermostat and control panel. Select your desired cooking function and temperature on your oven, and the element will activate to reach and maintain the set temperature.
7. Údržba
The Nardi heating element itself requires minimal maintenance. However, to ensure its longevity and efficient operation:
- Udržujte v čistotě: Avoid food spills directly onto the heating element. If spills occur, ensure the oven is cool and power is disconnected before gently wiping away any residue. Do not use abrasive cleaners or sharp objects on the element.
- Pravidelná kontrola: Periodically inspect the element for any visible signs of damage, such as cracks, bulges, or discoloration. If any damage is observed, discontinue use and replace the element.
- Čištění trouby: Follow your oven manufacturer's guidelines for general oven cleaning. Ensure the element is completely cool before cleaning the oven interior.
8. Řešení problémů
Pokud vaše trouba po výměně topného tělesa správně nehřeje, zvažte následující:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Topné těleso se nezahřívá. | Bez proudu do trouby. Uvolněné připojení drátu. Faulty element (rare for new). Faulty oven thermostat/control. | Zkontrolujte jistič. Disconnect power and re-check wire connections. Test element continuity with a multimeter (if qualified). Consult an oven repair technician. |
| Trouba se zahřívá nerovnoměrně. | Element partially failed. Oven thermostat issue. | Inspect element for visible damage. If damaged, replace. Consult an oven repair technician. |
| Zápach spáleniny při prvním použití. | Spalování výrobních zbytků. | This is normal for the first few uses. Ensure good ventilation. If smell persists, disconnect power and inspect. |
Pokud kroky pro řešení potíží problém nevyřeší, doporučuje se kontaktovat kvalifikovaného technika pro opravu spotřebičů.
9. Záruka a podpora
For information regarding the warranty of your Nardi heating element, please refer to the purchase documentation or contact the retailer from whom the product was purchased. For technical support or further assistance, please contact Nardi customer service or an authorized service center.
Note: This manual provides general guidance. Always prioritize safety and consult professional assistance when in doubt.
