Crosley CR8005A Cruiser Přenosný 3rychlostní gramofon Návod k obsluze

Zavedení

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your Crosley CR8005A Cruiser Portable 3-Speed Turntable. Please read this manual thoroughly before using the product to ensure proper function and longevity.

Obsah balení

• Crosley CR8005A Cruiser Portable 3-Speed Turntable
• Napájecí adaptér
• Adaptér 45 RPM
• Návod k použití (tento dokument)

Nastavení

1. Vybalení a umístění

Carefully remove the turntable from its packaging. Place the unit on a flat, stable surface away from direct sunlight, heat sources, and excessive dust or vibration. Ensure adequate ventilation around the unit.

Image: The Crosley CR8005A turntable in its closed, portable briefcase configuration, showcasing its black exterior and chrome hardware.

2. Připojení napájení

Locate the power adapter. Plug the small end into the DC IN jack on the back of the turntable. Plug the other end into a standard wall outlet.

Image: The rear panel of the turntable, highlighting the power input, RCA output jacks (red and white), and the auxiliary input port.

3. Platter and Stylus Setup

Open the turntable lid. Remove any protective packaging from the platter and tonearm. Ensure the platter mat is correctly seated on the platter. Remove the clear plastic stylus guard from the needle by gently pulling it forward.

Image: The turntable with its lid open, showing the record platter, tonearm, and the integrated stereo speakers.

4. Volba rychlosti

The turntable supports three speeds: 33 1/3, 45, and 78 RPM. Select the appropriate speed using the speed selector switch located on the turntable's control panel.

Návod k obsluze

1. Přehrávání nahrávky

1. Umístěte desku na talíř gramofonu.
2. If playing a 45 RPM single, place the included 45 RPM adapter over the center spindle.
3. Turn the Power/Volume knob clockwise to power on the unit and adjust the volume.
4. Release the tonearm from its rest.
5. Jemně zvedněte raménko a umístěte hrot gramofonu nad požadovanou stopu na desce.
6. Pomalu spusťte raménko na desku. Spustí se přehrávání.
7. At the end of the record, the tonearm will automatically return to its rest (manual return tonearm).

Obrázek: Podrobný view of the turntable's operational controls, including the tonearm, stylus, speed switch, and volume knob.

2. Použití sluchátek

Connect headphones to the headphone jack located on the front panel for private listening. The built-in speakers will be muted when headphones are connected.

3. External Speaker Connection (RCA Output)

To connect the turntable to external speakers or an amplifier, use an RCA cable (not included). Connect the red and white RCA plugs from the turntable's RCA output jacks to the corresponding input jacks on your external audio system.

4. Pomocný vstup

The turntable features an auxiliary input jack. Connect an external audio device (e.g., smartphone, MP3 player) using a 3.5mm audio cable (not included) to play audio through the turntable's built-in speakers.

5. Konec produktuview Video

Údržba

1. Čištění stylusu

Use a soft brush, gently brushing from back to front, to remove dust and debris from the stylus. Avoid touching the stylus with your fingers.

2. Čištění jednotky

Wipe the turntable's exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish.

3. Výměna stylusu

The stylus (needle) is a consumable part and will wear out over time. Refer to the manufacturer's website or contact customer support for information on purchasing replacement styli and instructions for replacement.

Odstraňování problémů

• Bez napájení: Ujistěte se, že je napájecí adaptér bezpečně připojen k gramofonu i k funkční zásuvce.
• Žádný zvuk: Check that the volume is turned up. If using external speakers, ensure they are properly connected and powered on. If using headphones, ensure they are fully plugged in.
• Zkreslený zvuk:
  • Ensure the record is clean and free of dust.
  • Verify the correct speed setting (33 1/3, 45, or 78 RPM) for the record being played.
  • Check the stylus for damage or excessive wear. A worn stylus can cause poor sound quality.
  • Ensure the turntable is on a stable, level surface to prevent vibrations affecting playback.
• Skákání:
  • Důkladně vyčistěte desku.
  • Ujistěte se, že otočný talíř stojí na stabilním a rovném povrchu.
  • Check the stylus for damage or debris.

Specifikace

Záruka a podpora

For warranty information, technical support, or to purchase replacement parts, please visit the official Crosley webnebo kontaktujte jejich zákaznický servis. Uschovejte si účtenku jako doklad o koupi.

Pro více informací navštivte Obchod Crosley na Amazonu.