SINGER Simple 2263 23-Stitch Sewing Machine

Zavedení

This manual provides essential information for the proper setup, operation, and maintenance of your SINGER Simple 2263 23-Stitch Sewing Machine. Designed for ease of use, this machine offers foundational features for various sewing projects. Please read these instructions carefully before using the machine to ensure safe and efficient operation.

Figure 1: SINGER Simple 2263 23-Stitch Sewing Machine. This image displays the full sewing machine with its main components visible, including the stitch selector, tension dial, and needle area.

Důležité bezpečnostní pokyny

• Always unplug the sewing machine from the electrical outlet immediately after using and before cleaning, removing covers, or performing any user servicing.
• Do not allow the machine to be used as a toy. Close attention is necessary when the machine is used by or near children.
• Use this machine only for its intended use as described in this manual. Use only attachments recommended by the manufacturer.
• Nikdy nepoužívejte tento šicí stroj, pokud má poškozenou šňůru nebo zástrčku, pokud nefunguje správně, pokud spadl nebo je poškozen nebo spadl do vody.
• Držte prsty mimo všechny pohyblivé části. Jehla je obzvláště opatrná.
• Vždy používejte správnou stehovou desku. Nesprávná destička může způsobit zlomení jehly.
• Během šití netahejte ani netlačte látku. Mohlo by dojít k vychýlení jehly a jejímu zlomení.
• Při práci se strojem používejte ochranné brýle.

Co je v krabici

Po vybalení se prosím ujistěte, že jsou v balení všechny následující položky:

• Návod k použití
• Rychlý průvodce
• Darovací deska
• Thread Spool Cap Holders (2)
• Šroubovák
• Univerzální noha
• Patka na knoflíkovou dírku
• Patka pro šití knoflíků
• Cívky (3)
• Jehly (3)
• Lint Brush/Seam Ripper
• Power cord/Foot Control

Figure 2: Included Accessories. This image displays various accessories that come with the sewing machine, including bobbins, needles, different presser feet, and a seam ripper.

Nastavení

1. Připojení napájení

Connect the power cord to the machine and then to a 110-volt electrical outlet. Ensure the foot control is also connected to the machine.

2. Navlékání nitě do stroje

Správné navlékání nitě je klíčové pro optimální kvalitu stehu. Postupujte podle těchto kroků:

1. Place a spool of thread onto the spool pin. Ensure the thread unwinds smoothly.

Figure 3: Spool Pin. This image shows a close-up of the spool pin located at the top of the machine, where the thread spool is placed.

2. Guide the thread through the upper thread guides and tension discs as indicated by the numbered path on the machine.
3. Thread the needle from front to back. The automatic needle threader can assist with this step.

Figure 4: Needle Area. This image provides a close-up view of the needle and presser foot area, highlighting the automatic needle threader mechanism.

3. Navíjení a vkládání cívky

Refer to the Quick Start Guide for detailed instructions on winding the bobbin and correctly inserting it into the bobbin case.

Návod k obsluze

1. Výběr stehu

Turn the stitch selector dial to choose from the 23 available stitch patterns. Ensure the needle is in its highest position before changing stitches.

2. Nastavení délky a šířky stehu

Use the length and width dials to fine-tune your chosen stitch. Experiment with different settings on scrap fabric to achieve the desired result.

3. Using the Presser Foot Lifter

The extra-high presser foot lifter allows for easy placement and removal of multiple layers of fabric or bulky materials under the presser foot.

4. Sewing a Buttonhole

Attach the buttonhole foot. Follow the markings on the foot and the machine's instructions for a four-step buttonhole process.

Figure 5: Buttonhole Stitching. This image shows the buttonhole presser foot attached to the machine, actively stitching a buttonhole on a piece of blue fabric.

Údržba

1. Čištění stroje

Regular cleaning helps maintain machine performance. Use the provided lint brush to remove lint and dust from the bobbin area and feed dogs. Always unplug the machine before cleaning.

2. Výměna jehly

Replace the needle regularly, especially if it becomes bent, dull, or if you notice skipped stitches. Use the screwdriver to loosen the needle clamp screw, insert a new needle with the flat side facing the back, and tighten the screw.

Odstraňování problémů

Pokud narazíte na problémy, znovuview následující běžné problémy a jejich řešení:

• Vynechané stehy: Check if the needle is bent or dull, replace if necessary. Ensure the needle is inserted correctly. Verify the machine is threaded properly.
• Přetržení nití: Check for correct threading, proper thread tension, and ensure the needle is not bent or too small for the thread.
• Zvrásnění látky: Adjust thread tension, use a finer needle, or consider using a stabilizer for delicate fabrics.
• Stroj se nespouští: Ensure the power cord and foot control are securely plugged in. Check the power switch.

For more complex issues, consult the full instruction manual or contact SINGER customer support.

Specifikace

Záruka a podpora

This sewing machine is warranted for use in the US and Canada at 110 volts only. For specific warranty details, including duration and coverage, please refer to the warranty card included with your product or visit the official SINGER webmísto.

For technical support, replacement parts, or further assistance, please contact SINGER customer service through their official channels.