1. Úvod
This manual provides instructions for the proper setup, operation, and maintenance of your Nady MSC3 Microphone Stand Kit. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.
2. Obsah balení
Ověřte, zda jsou v balení přítomny všechny níže uvedené položky:
- Nady Dynamic Microphone
- Adjustable Tripod Microphone Stand
- Klip na mikrofon
- 15 ft XLR to 1/4" (6.35mm) Audio Cable
Image: Complete Nady MSC3 Microphone Stand Kit components.
3. Pokyny k nastavení
Follow these steps to assemble and prepare your microphone stand kit for use:
- Sestavení stativu:
Unfold the tripod legs of the microphone stand until they are fully extended and stable. Adjust the height of the stand by loosening the height adjustment clutch, extending the upper shaft to the desired height, and then tightening the clutch securely.
- Připevnění klipu mikrofonu:
Screw the microphone clip onto the threaded top of the stand's upper shaft. Ensure it is tightened firmly to prevent the microphone from rotating or falling.
- Vložení mikrofonu:
Gently insert the Nady dynamic microphone into the microphone clip. The clip is designed to hold the microphone securely.
- Připojení audio kabelu:
Connect the XLR end of the provided 15 ft cable to the XLR input port at the bottom of the microphone. Connect the 1/4" (6.35mm) end of the cable to the microphone input of your audio interface, mixing console, digital recorder, or ampživější.
Image: Nady microphone mounted on the adjustable stand.
Image: The included 15 ft XLR to 1/4" audio cable.
4. Návod k obsluze
Once assembled, operate your Nady microphone kit as follows:
- Vypínač mikrofonu:
Locate the ON/OFF switch on the microphone body. Slide the switch to the 'ON' position to activate the microphone. Slide it to 'OFF' when not in use to prevent unwanted noise or feedback.
- Audio Device Connection:
Ensure your audio device (mixer, amplifier, etc.) is powered on and its input volume for the microphone channel is set to a low level before increasing it gradually to avoid sudden loud sounds.
- Umístění mikrofonu:
Position the microphone approximately 2-6 inches from the sound source for optimal vocal or instrument pickup. Experiment with distance and angle to achieve the desired sound quality.
Image: Nady microphone with visible ON/OFF switch.
5. Údržba
Proper maintenance ensures the longevity and performance of your microphone kit:
- Čištění: Use a soft, dry cloth to wipe down the microphone and stand. Avoid using liquid cleaners or solvents, as they may damage the finish or internal components.
- Skladování: When not in use, store the microphone and stand in a dry, cool place, away from direct sunlight and extreme temperatures. Disassemble the stand for compact storage if needed.
- Péče o kabely: Avoid kinking or sharply bending the audio cable. Coil it loosely when storing to prevent damage to the internal wiring.
6. Řešení problémů
Pokud narazíte na problémy, podívejte se na následující běžné problémy a jejich řešení:
| Problém | Možná příčina / řešení |
|---|---|
| Žádný zvukový výstup |
|
| Špatná kvalita zvuku / šum |
|
| Stand Instability |
|
7. Specifikace
Key technical specifications for the Nady MSC3 Microphone Kit (Model Nad-6572):
- Tvarový faktor mikrofonu: Ruční
- Polární vzor: Jednosměrný
- Technologie připojení: XLR
- Typ konektoru: XLR to 1/4" (6.35mm)
- Impedance: 600 ohmů
- Citlivost zvuku: 55 decibelů
- Poměr signál-šum: 60 dB
- Frekvenční odezva: Až 20 kHz
- Zdroj napájení: Corded Electric (via audio device)
- Materiál: Kov
- Hmotnost položky (sada): Přibližně 3.7 liber
- Doporučená použití: Zpěv, karaoke
- Kompatibilní zařízení: Audio Interfaces, Mixing Consoles, Digital Recorders, Ampzáchranáři
8. Záruka a podpora
For warranty information or technical support regarding your Nady MSC3 Microphone Stand Kit (Model Nad-6572), please refer to the documentation included with your purchase or visit the official Nady webwebu. V případě problémů s produktem nebo dotazů kontaktujte jejich zákaznický servis.