Centrální pneumatický vzduch File Návod k použití

1. Úvod

The Central Pneumatic Air File is a compact and efficient pneumatic tool designed for material removal and filing in tight or hard-to-reach spots. This versatile tool utilizes compressed air to provide rapid filing action, making it suitable for various applications where precision and speed are required.

Klíčové vlastnosti:

• Spotřeba vzduchu: Approximately 8.5 CFM (Cubic Feet per Minute)
• Pracovní tlak: Requires 90 PSI (Pounds per Square Inch) for optimal performance
• Provoz s nízkou hlučností: Designed for reduced operational noise

Figure 1: The Central Pneumatic Air File shown with its four interchangeable files: flat cut, half round, round, and triangular. This image displays the main body of the air file, the air inlet, and the file upevňovací mechanismus.

2. Bezpečnostní informace

Always observe basic safety precautions when using this product to reduce the risk of personal injury and damage to the tool. Read and understand all instructions before operation.

• Používejte vhodné osobní ochranné prostředky (OOP), včetně ochranných brýlí, chráničů sluchu a rukavic.
• Ujistěte se, že pracovní prostor je čistý, dobře osvětlený a bez překážek.
• Do not operate the air file if you are tired or under the influence of drugs, alcohol, or medication.
• Před prováděním jakýchkoli úprav, výměny příslušenství nebo údržby odpojte přívod vzduchu.
• Nepřekračujte maximální doporučený tlak vzduchu 90 PSI.
• Keep hands and body parts clear of the moving file během provozu.
• Use only accessories and replacement parts recommended by the manufacturer.
• Nástroj skladujte na suchém a bezpečném místě mimo dosah dětí.

3. Obsah balení

Po otevření balení zkontrolujte, zda jsou všechny součásti přítomny a nepoškozené:

• Centrální pneumatický vzduch File Jednotka
• Plochý řez File
• Půlkulaté File
• Kolo File
• Trojúhelníkový File
• Návod k použití (tento dokument)

If any items are missing or damaged, please contact Central Pneumatic customer service immediately.

4. Nastavení

Proper setup is crucial for the safe and efficient operation of your air file.

4.1 Připojení přívodu vzduchu:

1. Ensure your air compressor is turned off and the air tank is drained.
2. Connect a standard 1/4 inch NPT air hose (not included) to the air inlet on the rear of the air file. Use thread sealant tape for a secure, leak-free connection.
3. Connect the other end of the air hose to your air compressor's regulated output.
4. Set your air compressor's regulator to 90 PSI. Do not exceed this pressure.

4.2 Compressor Requirements:

The performance of your air file is directly related to the capacity of your air compressor. Refer to the chart below for recommended compressor tank sizes based on usage:

Figure 2: This chart illustrates the recommended air compressor tank sizes for optimal performance of the air file. For continuous use, a 29+ gallon compressor is recommended. For intermittent use, 7-28 gallon compressors are suitable. 1-6 gallon compressors are not recommended.

4.3 Počáteční mazání:

Before first use, and regularly thereafter, add 3-5 drops of pneumatic tool oil (not included) into the air inlet of the tool. This lubricates the internal components and ensures smooth operation and longevity.

4.4 Attaching a File:

1. Zajistěte vzduch file is disconnected from the air supply.
2. Identify the desired file type (flat cut, half round, round, or triangular) for your task.
3. Insert the shank of the file into the chuck opening at the front of the air file.
4. Zajistěte file by tightening the chuck collar or mechanism (refer to tool specific design for exact method, typically a set screw or quick-release). Ensure the file is firmly seated and cannot wobble.

5. Návod k obsluze

Once the air file is properly set up and connected to the air supply, you can begin operation.

1. Příprava obrobku: Secure the material you intend to file in a vise or clamp aby se zabránilo pohybu během provozu.
2. Uchopte nástroj: Hold the air file firmly with both hands if possible, or with one hand providing stable control.
3. Aktivovat nástroj: Depress the trigger or lever located on the top of the tool to start the filing action. The file will begin to reciprocate rapidly.
4. Aplikovat na obrobek: Gently bring the moving file into contact with the workpiece. Apply light, consistent pressure. Avoid excessive force, as this can bog down the tool and reduce its effectiveness, potentially causing premature wear or damage.
5. Ovládací pohyb: Průvodce file along the desired path, allowing the tool to do the work. The different file shapes allow for various applications, such as flat surfaces, curves, or internal angles.
6. Deaktivace nástroje: Release the trigger to stop the filing action.
7. Kontrola práce: Periodically stop and inspect your work to ensure you are achieving the desired result.

Poznámka: The tool operates at a stroke rate of approximately 3,700 strokes per minute, providing fast material removal. Always maintain a firm grip and control.

6. Údržba

Regular maintenance will extend the life of your Central Pneumatic Air File and ensure its continued performance.

6.1 Mazání:

• Add 3-5 drops of pneumatic tool oil into the air inlet before each use, or at least once daily if used frequently.
• Run the tool for a few seconds after oiling to distribute the lubricant.

6.2 Čištění:

• Po každém použití odpojte přívod vzduchu a otřete nástroj čistým, suchým hadříkem.
• Remove any debris or filings from the chuck area and the file itself. A stiff brush can be used for the files.

6.3 Úložiště:

• Store the air file in a clean, dry environment, away from excessive moisture or extreme temperatures.
• Ensure the tool is disconnected from the air supply before storage.

7. Řešení problémů

If you encounter issues with your Central Pneumatic Air File, podívejte se na následující běžné problémy a jejich řešení:

8. Specifikace

9. Záruka a podpora

For information regarding warranty coverage, technical support, or replacement parts for your Central Pneumatic Air File, please refer to the warranty card included with your purchase or visit the official Central Pneumatic webwebu. Můžete také kontaktovat přímo jejich zákaznický servis a požádat o pomoc.

Doporučuje se uschovat si účtenku jako doklad o koupi pro případné reklamace.