Zavedení
This manual provides comprehensive instructions for the Dish Network 3.4 and 4.4 Remote Set. This set includes a 3.4 IR 1 remote with a green color-coded ID pad and a 4.4 IR/UHF 2 remote with a blue color-coded ID pad. These remotes serve as an upgrade and direct replacement for the original remotes used with the Dish Network 322 receiver model.
The remotes are pre-programmed and designed for ease of use, offering both Infrared (IR) and Ultra High Frequency (UHF) capabilities for versatile control of your Dish Network receiver and compatible devices.
Konec produktuview
Image: The Dish Network 3.4 (left, green ID pad) and 4.4 (right, blue ID pad) remote controls. Both remotes feature a black body with purple and red buttons, including a directional pad, number keys, and various function buttons for TV and receiver control.
The Dish Network 3.4 remote is primarily an Infrared (IR) remote, identified by its green color-coded ID pad. The Dish Network 4.4 remote offers both Infrared (IR) and Ultra High Frequency (UHF) capabilities, distinguished by its blue color-coded ID pad. Both remotes are designed to provide seamless control over your Dish Network 322 receiver.
Nastavení
1. Instalace baterie
The remotes require batteries for operation. Although batteries are not included with the set, the remotes are designed to use standard Lithium batteries. To install:
- Najděte kryt prostoru pro baterie na zadní straně dálkového ovladače.
- Posuňte nebo zvedněte kryt pro otevření přihrádky.
- Insert the required batteries, ensuring correct polarity (+ and -) as indicated inside the compartment.
- Bezpečně nasaďte kryt prostoru pro baterie.
2. Initial Programming / Pairing
These remotes are pre-programmed for the Dish Network 322 receiver. For most users, they will work immediately upon battery installation. However, if you experience issues or wish to pair them with a different device or for UHF functionality (4.4 remote only), follow these general steps:
- For IR Control: Ensure a clear line of sight between the remote's IR emitter and the receiver's IR sensor. The 3.4 remote operates solely via IR.
- For UHF Control (4.4 Remote Only): The 4.4 remote supports UHF, allowing control without direct line of sight. Refer to your Dish Network receiver's manual for specific UHF pairing instructions, as this process typically involves a menu option on the receiver itself.
- Programming for TV/VCR: To control your television or VCR, you may need to program the remote using specific codes. Consult the original Dish Network remote programming guide or the Dish Network website for a list of codes and programming steps. The remotes are compatible with VCRs.
Návod k obsluze
The Dish Network 3.4 and 4.4 remotes feature a standard layout for intuitive control of your receiver and connected devices. Key functions include:
- Vypínač: Turns the receiver and/or TV on/off.
- Zvýšení/Snížení hlasitosti: Nastavuje hlasitost zvuku.
- Kanál nahoru/dolů: Změní kanál.
- Numerická klávesnice (0-9): Přímý vstup do kanálu.
- Průvodce: Zobrazí programového průvodce.
- Select/OK: Potvrzuje výběry v nabídkách.
- Navigační šipky: Procházení nabídek a možností.
- Ztlumit: Ztiší zvuk.
- Odvolání: Vrátí se na předchozí kanál.
- Info: Zobrazuje informace o programu.
- Záznam: Initiates recording (if receiver supports DVR).
- View TELEVIZE: Switches between TV and other inputs.
- Systémová informace: Accesses system information.
For detailed functionality of specific buttons, refer to your Dish Network receiver's user manual.
Údržba
Výměna baterie
When the remote's performance degrades (e.g., reduced range, unresponsive buttons), it is likely time to replace the batteries. Follow the battery installation steps outlined in the "Setup" section. Always replace all batteries at the same time with new ones of the same type.
Čištění
K čištění dálkového ovladače použijte měkký, suchý hadřík. V případě odolné nečistoty lehceampen the cloth with water or a mild, non-abrasive cleaner. Avoid using harsh chemicals or excessive moisture, as these can damage the remote's electronics or finish.
Odstraňování problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Dálkový ovladač nereaguje. | Vybité nebo nesprávně nainstalované baterie. | Vyměňte baterie a dbejte na správnou polaritu. |
| Remote has limited range (IR). | Obstruction between remote and receiver; weak batteries. | Zajistěte nerušený výhled. Vyměňte baterie. |
| Remote not controlling TV/VCR. | Remote not programmed for the device. | Program the remote using the appropriate codes for your TV/VCR. Refer to Dish Network's programming guide. |
| 4.4 remote not working via UHF. | Not properly paired with receiver for UHF. | Follow UHF pairing instructions in your Dish Network receiver's manual. |
Specifikace
- Značka: Jídlo
- Model: 3.4 a 4.4
- Čísla dílů: 155153-3.4 (for 3.4 remote), 155154-4.4 (for 4.4 remote)
- Kompatibilní zařízení: Dish Network 322 Receiver, VCR
- Speciální vlastnosti: Infrared (IR), Pre-Programmed, Ultra High Frequency (UHF) for 4.4 remote
- Typ baterie: Lithium (není součástí balení)
- Technologie připojení: Infrared, UHF (for 4.4 remote)
- Rozměry produktu: Přibližně 19.3 x 7.11 x 5.59 cm
- Hmotnost položky: Přibližně 91 g
- Barva: Blue (4.4 remote ID pad), Green (3.4 remote ID pad)
Záruka a podpora
This product is designed as a direct replacement for Dish Network 322 receiver remotes. For specific warranty information, please refer to the retailer or original manufacturer's documentation provided at the time of purchase.
For technical support, programming assistance, or further inquiries regarding your Dish Network receiver and compatible remotes, it is recommended to contact Dish Network customer service directly or visit their official support website. They can provide the most accurate and up-to-date information for your specific setup.
Note: This manual provides general guidance. Specific features and programming steps may vary based on your Dish Network receiver model and software version.
